BWNKH - BATTERY PARTS (PLATES, GRIDS, ETC)

  • MSDS: BWNKH
  • Manufacturer: CONCORDE BATTERY CORP
  • Product Name: BATTERY PARTS (PLATES, GRIDS, ETC)
  • National Stock Number: 6140-00-406-2633
Product Identification

Product ID:BATTERY PARTS (PLATES, GRIDS, ETC)
MSDS Date:04/09/1992
FSC:6140
NIIN:00-406-2633
MSDS Number: BWNKH

Responsible Party
CONCORDE BATTERY CORP
2009 SAN BERNARDINO RD
WEST COVINA, CA 91790-1006
US

Emergency Phone: 800-255-3924/818-813-1234

Info Phone: 818-962-4006/FAX 818-338-3549

Cage: 63017

Contractor
CONCORDE BATTERY CORP
WEST COVINA, CA 91790-1006 US

Telephone: 800-255-3924/818-813-1234

Cage: 63017

Ingredients

LEAD OXIDE, (RED LEAD OXIDE)

CAS: 1314-41-6

RTECS: OG5425000

OSHA PEL SEE 1910.1025

ACGIH TLV: 0.15 MG/M3


LEAD OXIDE (LITHARGE)

CAS: 1317-36-8

RTECS: OG1750000

Fraction By Weight: 60%


LEAD OXIDE

CAS: 1309-60-0

RTECS: OG0700000


LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 38%

OSHA PEL SEE 1910.1025

ACGIH TLV: 0.15 MG/M3,DUST;9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


SULFURIC ACID (SARA III)

CAS: 7664-93-9

RTECS: WS5600000

Fraction By Weight: 20% %

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9394

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:DUST/VAPOR &/OR FUMES MAY BE
IRRITATING TO RESPIRATORY SYSTEM. SKIN CONTACT:CAUSE IRRITATION.
EYE CONTACT:CAUSE IRRITATION. INGEST:CAN RESULT IN BOTH ACUTE &
CHRONIC OVEREXPOSURE.
Explanation of Carcinogenicity:LEAD
Effects of Overexposure:EYE/SKIN/RESPIRATORY IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES:FLUSH W/COPIOUS QUANTITIES OF COOL WATER. GET IMMED MED
ATTN. SKIN:WASH THOROUGHLY W/SOAP & WATER. INHAL:REMOVE FROM
EXPOSURE. GET MED ATTN IF EXPERIENCING EFFECTS OF OVEREXPOSURE.
INGEST:GET IMM ED MED ATTN.

Fire Fighting

Extinguishing Media:DRY CHEMICAL/CARBON DIOXIDE SHOULD BE USED ON
SURROUNDING FIRE. DO NOT USE WATER ON FIRES WHERE MOLTEN METALS IS
PRESENT
Fire Fighting Procedures:USE FULL BODY PROTECTIVE CLOTHING & FULL
FACEPIECE, SELF-CONTAINED BREATHING APPARATUS OPERATED IN
POSITIVE-PRESSURE MODE.
Unusual Fire/Explosion Hazard:MOLTEN METALS PRODUCE FUMES &/OR VAPORS
THAT MAY BE TOXIC OR RESPIRATORY IRRITANTS. THE PRODUCT CAN REACT
VIGOROUSLY WITH STRONG OXIDIZING AGENTS.

Accidental Release

Spill Release Procedures:PRODS ARE DRY PLATES.ACID APPEARS AS DRY ACID
INSTEAD OF LIQ BATT FLUID.NO LEAKAGE EXPECTED UNDER NORMAL
CONDITIONS/TRANSP.SILLAGE OF PLATES:VACUUM DUST OF LEAD CMPDS.STORE
PARTICULATE MATTER IN DRY C NTNRS .DO NOT USE COMPRESSED AIR/DRY
SWEEPING.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:RESPIRATAORY (AS SPECIFIED BY 29CFR1910.1025
SUBPART(F) OF FED SAFETY & HEALTH ADMIN STD FOR OCCUPATIONAL EXPO
TO LEAD) EQPMT SHOULD BE WORN IF LEAD DUST IS PRESENT.
Ventilation:NOT REQUIRED UNDER NORMAL CONDITIONS.
Protective Gloves:RUBBER GLOVES FOR NORMAL HANDLING.
Eye Protection:NOT REQUIRED UNDER NORMAL CONDITIONS
Other Protective Equipment:NOT REQUIRED UNDER NORMAL CONDITIONS.
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
PER MSDS:NO TYPICAL PHYSICAL DATA REFERS TO PRODUCT ITSELF.

Chemical Properties

HCC:N1
Appearance and Odor:PRODUCT MANUFACTURED BY PASTING LEAD OXIDE OVER
LEAD FRAME. (SEE SUPPLEMENTAL)

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND THIS PRODUCT MAY LIBERATE HYDROGEN GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS FOR LEAD COMPOUNDS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.