Product ID:EUTECROD 185 FC
MSDS Date:03/15/1993
FSC:3439
NIIN:00-901-8059
MSDS Number: BWNLB

EUTECTIC CORP

40-40 172ND STREET
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-445-1784

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 40-50%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2 MG/M3 FUME; 9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ZINC (SARA III)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 30-40%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 10-20%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9394

BORIC ACID

CAS: 10043-35-3

RTECS: ED4550000

OSHA PEL 10 MG BORATES/M3

ACGIH TLV: 5 MG BORATES/M3

BORAX (SODIUM TETRABORATE, DECAHYDRATE)

CAS: 1303-96-4

RTECS: VZ2275000

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3; 9394

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:POT HEALTH EFFECTS WHEN PROD USED IN
ASSOC W/WELD/BRAZE/BURN/THERMA SPRAY/ETC.FUMES:DANGEROUS TO
HEALTH,OVERXPO CAUSE LUNG DAMAGE &/OR OTHER ORGAN DAMAGE.ARC
RAYS/ULTRAVIOLET LIGHT INJURE EYES,BURN SK IN.ELECTRICAL SHOCK CAN
KILL.MAY BE HARMFUL OR FATAL IF SWALLOWED.
Explanation of Carcinogenicity:PER MSDS:CONTAINS NICKEL WHICH IS LISTED
AS CARCINOGEN OR POSSBILE CARCINOGEN IN NTP/IARC/OSHA.
Effects of Overexposure:LUNG DAMAGE &/OR OTHER ORGAN DAMAGE. EYE
INJURY, SKIN BURNS.
Medical Cond Aggravated by Exposure:AGGRAVATION OF PRE-EXISITNG RESP OR
ALLERGIC CONDITIONS.

First Aid:INHAL:MOVE TO FRESH AIR. CONTACT PHYSICIAN & ADVISE ON
INGREDS LISTED.SKIN:THOROUGHLY WASH W/SOAP & WATER TO REMOVE ALL
RESIDUE.IRRIT/BURN DEVELOPS CONSULT PHYSICIAN.EYE:THOROUGHLY FLUSH
W/WATER FOR @ LEAST 15MINS.OBTAIN MED ADVICE FOR FLUXES & CHEMICAL
AIDS.ADVISE PHYSICIAN OF INGREDS LISTED.INGEST:CALL PHYSICIAN &/OR
LOCAL POISON CONTROL CENTER.ADVISE OF INGREDS LISTED.

Flash Point:NON-FLAMMBLE
Extinguishing Media:SEE ANSI Z49.1 FOR FIRE PREVENTION DURING USE OF
WELDING & ALLIED PROCESSES. CO2, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:TOXIC FUMES MAY BE PRODUCED.USE APPROVED
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:ROD/BRAZ/SOLD:GEN NONFLAMM:WELD
ARC/SPARK/FLAME CAN IGN COMBUST/FLAMM MATLS.METAL POWDER DUST
FIRE/EXPLO HAZ W/FAVORABLE CONDITIONS.FLUX/CHEM AID (SUPPLEMENTAL)

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:USE ADEQUATE VENTILATION TO KEEP BELOW EXPO
LIMITS.KEEP FUMS/GAS FROM BREATHING ZONE.KEEP WELDER'S HEAD OUT OF
FUMES.REFER TO CHAPTER ON THERMAL SPRAYING PUBLISHED BY AMER WELD
SOC.

Respiratory Protection:NONE SPECIFIED BY MANUFACTURER.
Ventilation:USE W/ADEQUATE VENTILATION.
Protective Gloves:WELDING GLOVES.
Eye Protection:APPROPRIATE PROT FOR ALL OPERATIONS.
Other Protective Equipment:AS CONDITIONS/OPERATIONS WARRANT TO MIN
SKIN/EYE/RESP CONTACT.
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
FIRE/EXPLO HAZ:MAY GIVE OFF HYDROGEN CHLORIDE,PHOSGENE,CHLORINE
GASES.CANS UNDER PRESSURE/FLAMM MAY EXPLODE.

HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:CERTAIN FLUXES Z& CHEMICAL AIDS MAY BE
REACTIVE.
Hazardous Decomposition Products:FUMES/GASES/DUSTS.DECOMP PROD OF
NORMAL OPERATION INCLUDE FROM VOLATILIZATIN,RX,OXID OF INGREDS &
BASE METAL,COATING,ETC

Waste Disposal Methods:NONE SPECIFIED BY MANUFACTURER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.