Product ID:SOLDER,SN 63 (SN 63 PB 37) WRMAP 3 PLUS
MSDS Date:03/11/1992
FSC:3439
NIIN:01-008-7580
MSDS Number: BWNLK

MULTICORE SOLDERS INC

1751 JAY LELL DR
RICHARDSON, TX 75081
US

Emergency Phone: 214-238-1224

Info Phone: 214-238-1224

Cage: 0YP31

MULTICORE SOLDERS INC

RICHARDSON, TX 75081 US

Telephone: 214-238-1224

Cage: 0YP31

LEAD (SARA 313) (CERCLA)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 35 - 40%

OSHA PEL SEE 1910.1025

ACGIH TLV: 0.15MG/M3 DUST; 9495

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 55 - 60%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9495

ROSIN ACID

CAS: 8050-09-7

Fraction By Weight: 1 - 3%

LD50 LC50 Mixture:NOT RELEVANT
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:TARGET ORGANS:EYES, SKIN, CNS,
RESPIRATORY TRACT. ACUTE- WEAKNESS, VOMITING, LOSS OF APPETITE,
CONVULSION, COMA. DUST, VAPOR AND/OR FUMES MAY CAUSE EYE, SKIN,
RESPIRATORY TRACT IRRITATION. CHRONIC- HI GH LEVELS OF
AIRBORNE/INGESTED LEAD MAYRESULT IN DAMAGE TO BLOOD-FORMING,
NERVOUS, URINARY & REPRODUCTIVE SYSTEMS.
Explanation of Carcinogenicity:CONTAINS LEAD.
Effects of Overexposure:WEAKNESS, VOMITING, LOSS OF APPETITE,
CONVULSION, COMA, EYE, SKIN, RESPIRATORY TRACT IRRITATION,
HEADACHE, LACK OF SLEEP, HYPERTENSION
Medical Cond Aggravated by Exposure:DISEASES OF THE BLOOD AND BLOOD
FORMING ORGANS, KIDNEYS, NERVOUS SYSTEM AND POSSIBLY REPRODUCTIVE
SYSTEMS MAY BE AGGRAVATED BY OVEREXPOSURE TO LEAD.

First Aid:CALL A DOCTOR IF SYMPTOMS PERSIST. EYE:IMMEDIATELY FLUSH WITH
WATER FOR 15 MINUTES. HOLD EYELIDS OPEN. CALL PHYSICIAN. SKIN:WASH
WITH SOAP & WATER. INHALED:REMOVE TO FRESH AIR. PROVIDE CPR/OXYGEN
IF N EEDED. ORAL:CALL A PHYSICIAN/POISON CONTROL CENTER
IMMEDIATELY. NOTE:OCCASIONAL BLOOD TESTING FOR LEAD LEVEL SHOULD BE
ROUTINE FOR INDIVIDUALS WHO ARE CHRONICALLY EXPOSED TO LEAD.

Flash Point:NONE
Extinguishing Media:DRY CHEMICAL, FOAM, CARBON DIOXIDE. DO NOT USE
WATER ON FIRE WHERE MOLTEN METALS IS PRESENT.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING AND
NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS WITH FULL
FACEPIECE OPERATED IN THE POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:MOLTEN METALS PRODUCE HEAVY METAL FUMES,
DUST AND/OR VAPOR.

Spill Release Procedures:COLLECT AND USE. IF CONTAMINATED OR IN SMALL
PARTICLES, VACUUM OR COLLECT MATERIAL. NEVER USE ANY METHOD WHICH
GENERATE DUST. DO NOT USE FORCED AIR FOR CLEANING. WEAR
NIOSH-APPROVED DUST MASK IF DUSTY CONDITION.
Neutralizing Agent:NOT RELEVANT

Handling and Storage Precautions:STORE IN DRY PLACE AWAY FROM
INCOMPATIBLE MATERIALS. FOOD AND DRINK SHOULD NOT BE CONSUMED IN
AREAS WHERE METAL EXPOSURES ARE POSSIBLE.
Other Precautions:READ WARNING LABELS. KEEP OUT OF REACH OF CHILDREN.
FOR INDUSTRIAL USE ONLY. DO NOT GENERATE DUST. DO NOT BREATHE DUST
OR FUMES. AVOID CONTACT WITH DUST OR FUMES.

Respiratory Protection:REQUIRED IF TLV'S ARE NOT BEING MAINTAINED. USE
NIOSH APPROVED RESPIRATOR FOR LEAD DUST/FUME (HIGH EFFICIENCY
FILTERS) IF TLVS ARE EXCEEDED.
Ventilation:LOCAL DUST PICK UP AND ADEQUATE VENTILATION
Protective Gloves:HEAT RESISTANT DURING SOLDERING
Eye Protection:FACE SHIELD/GOGGLES DURING SOLDERING
Other Protective Equipment:INSTALL EYE WASH STATION.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING.
Supplemental Safety and Health

HCC:T6
NRC/State Lic Num:NOT RELEVANT
Melt/Freeze Pt:M.P/F.P Text:361F,183C
Spec Gravity:8
Viscosity:NOT RELEVANT
Evaporation Rate & Reference:NOT RELEVANT
Solubility in Water:INSOLUBLE
Appearance and Odor:GRAY METAL - NO ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:MAY FORM HEAVY METAL FUMES, DUST
AND/OR VAPORS.

Waste Disposal Methods:NEVER DISPOSE OF IN TRASH. HOLD FOR RECYCLING OR
DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.