Product ID:INTERSLEEK TIE COAT REACTOR, BXA390
MSDS Date:03/30/1994
FSC:8010
NIIN:00N057448
MSDS Number: BWQRD

Emergency Phone: 800-854-6813

Info Phone: 800-223-0154

Cage: 26351

Telephone: 800-589-1267/800-854-6813

Cage: 26351

2-HEXANONE, 5-METHYL; (METHYL ISOAMYL KETONE 2-HEXANONE,

CAS: 110-12-3

RTECS: MP3850000

Fraction By Weight: 20-25%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: CAN CAUSE IRRITATION WITH
REDNESS, TEARING AND BLURRED VISION. SKIN: IRRITATING. MAY RESULT
IN DERMATITIS. INHALATION: IRRITATION OF RESPIRATORY TRACT.
HEADACHE AND DIZZINESS AND UNCONSCIOUSNESS . INGESTION: MAY CAUSE
GASTRO-INTESTINAL IRRITATION. CHRONIC OVEREXPOSURE TO, AND MISUSE
OF, SOLVENTS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: HAS BEEN LINKED TO PERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid:EYES:FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR
AT LEAST 15 MINUTES. GET MEDICAL ATTENTION IMMEDIATELY. SKIN:
REMOVE CONTAMINATED CLOTHING, WASH SKIN WITH PLENTY OF SOAP AND
WATER. LAUNDER CLOTHES BEFORE REUSE. INHALATION: REMOVE TO FRESH
AIR. GIVE ARTIFICIAL RESPIRATION IF NEEDED. GET MEDICAL ATTENTION.
INGESTION: CALL PHYSICIAN IMMEDIATELY TO DETERMINE WHETHER OR NOT
TO INDUCE VOMIT.

Flash Point:99F,37.2C
Lower Limits:2.7%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
EQUIP.SMOTHER FLAMES W/ONE OF EXTING MEDIA. WATER MAY BE USED TO
COOL UNOPENED CNTNRS,BUT MUST NOT BE USED(SUPDAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN BUILDINGS DESIGNED AND
PROTECTED FOR STORAGE OF LIQUIDS WITH NFPA CLASS GIVEN BY OSHA
CLASS IC.
Other Precautions:AVOID BREATHING DUST OR CHIPS FROM SANDING OR
BLASTING SURFACES COATED WITH THIS PRODUCT. RECOMMEND GROUNDING AND
BONDING OF CONTAINERS WHEN TRANSFERRING LIQUIDS AND POWDERS TO
AVOID STATIC CHARGE BUI LD UP.

Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIR-BORNE PARTICLES
OF OVERSPRAY DURING SPRAY APPLIC. IN RESTRICTED VENT AREAS, USE
NIOSH/MSHA APPRVD RESP I/A/W 29 CFR 1910.134 TO REMOVE(SUPDAT)
Ventilation:PROVIDE SUFF VENT, IN VOL & PATTERN, TO KEEP TLV & LEL OF
HAZ INGS BELOW LIMITS SPECIFIED IN ING SEC,& TO REMOVE(SUPDAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:WEAR APPROP IMPERVIOUS PROT CLTHG TO PVNT
SKIN CONT. EMER EYE WASH & DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA .
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE,
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PRECAUTIONS: AS AN EXTING MEDIA. TAKE CARE TO PVNT SPREAD OF
BURNING LIQUID WITH WATER. CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. RESP PROT: COMBINATION OF PARTICULATES AN
D VAPOR. VENT: DECOMP PRODS DURING WELDING/FLAME CUTTING ON SURFS
COATED W/PROD.

Boiling Pt:B.P. Text:293F,145C
Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:.98
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:24(WT)

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:DIRECT HEAT, FLAME OR SPARK.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
VARIOUS HYDROCARBON FRAGMENTS.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.