Product ID:TONER FOR LASER BEAM PRINTER P90, W-UL-047
MSDS Date:07/28/1992
FSC:6850
NIIN:00N057621
MSDS Number: BWQXJ

CANON INC

30-2, SHIMOMARUKO 3-CHOME
OHTA-KU, TOKYO, JAPAN

Emergency Phone: 03-3758-2111

Info Phone: 03-3758-2111

Cage: EO274

CANON INC

TOKYO JA

Telephone: 03-3758-2111/ 516-328-5600(USA)

Cage: EO274

IRON OXIDE

CAS: 1317-61-9

Fraction By Weight: 45-56%

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3

STYRENE ACRYLATE COPOLYMER

CAS: 25153-46-2

Fraction By Weight: 40-50%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:TONER IS FINELY DIVIDED
SOLID. DO NOT BREATHE DUST. EYE:NO SPECIFIC HAZARD IS KNOWN TO MFR.
HOWEVER, ANY MATERIAL THAT CONTACTS EYE MAY BE IRRITATING. SKIN
CONTACT:LOW HAZARD FOR INDUSTRIA L HANDLING. CHRONIC:NO DATA
AVAILABLE FOR CHRONIC EFFECTS OF OVEREXPOSURE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:FLUSH W/PLENTY OF
WATER FOR AT LEAST 15 MINUTES. SKIN:WASH W/SOAP & WATER.

Extinguishing Media:CO*2, WATER, DRY CHEMICALS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS MATERIAL, LIKE MOST ORGANIC MATERIAL
IN POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.

Spill Release Procedures:AVOID INHALATION OF DUST. SWEEP MATERIAL ONTO
PAPER OR COLLECT IT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
AWAY FROM CONTACT W/OXIDIZING MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NONE REQUIRED.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:NONE REQUIRED.
Eye Protection:NONE REQUIRED.
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Melt/Freeze Pt:M.P/F.P Text:>212F,>100C
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.5-1.8(H*2O=1)
Evaporation Rate & Reference:NEGLIG (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TONER IS FINE POWDER W/SLIGHT PLASTIC ODOR.
Percent Volatiles by Volume:NEGLIG

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COMBUSTION WILL PRODUCE CARBON DIOXIDE
& POSSIBLY TOXIC CHEMICALS SUCH AS CARBON MONOXIDE.

Waste Disposal Methods:WASTE TONER COULD BE CONSIDERED AS PLASTIC
WASTE. FOR INCINERATION, PACKAGE IT ADEQUATELY. DO NOT DISPERSE
TONER INTO FIRE. DISPOSAL SHOULD BE SUBJECT TO FEDERAL, STATE OR
LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.