BWRXX - PASTE SILICONE, RTV9858

  • MSDS: BWRXX
  • Manufacturer: GE SILICONES
  • Product Name: PASTE SILICONE, RTV9858
  • National Stock Number: 8040-01-221-6090
Product Identification

Product ID:PASTE SILICONE, RTV9858
MSDS Date:02/12/1993
FSC:8040
NIIN:01-221-6090
MSDS Number: BWRXX

Responsible Party
GE SILICONES
260 HUDSON RIVER RD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Info Phone: 518-237-3330

Preparer: D.A. POLSINELLI

Cage: GESIL

Contractor
GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

Ingredients

STANNANE, DIBUTYLBIS(LAUROYLOXY)-; (DIBUTYL TIN DILAURATE).

CAS: 77-58-7

RTECS: WH7000000

Fraction By Weight: 5-10%

OSHA PEL 0.1 MG/M3 (SN)

ACGIH TLV: 0.1 MG/M3 (SN)


TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10-30%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 30-60%

OSHA PEL N/K

ACGIH TLV: 0.1 MG/M3 RDUST


DOW CORNING 200 FLUID; (DIMETHYLPOLYSILOXANES). LD50

CAS: 63148-62-9

RTECS: JJ6484500

Fraction By Weight: 30-60%

OSHA PEL N/K

ACGIH TLV: N/K


13 G/L

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGESTION: HARMFUL IF
SWALLOWED. SKIN: CAUSES MODERATE SKIN IRRITATION. INHALATION:
CAUSES MODERATE RESPIRATORY IRRITATION. EYE: MAY CAUSE SEVERE EYE
IRRITATION. CHRONIC: FORMALDEHYDE IS SKIN A ND RESPIRATORY
SENSITIZER, EYE AND THROAT IRRITANT, ACUTE TOXICANT, AND POTENTIAL
CANCER HAZARD.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:INGEST: INDUCE VOMIT IMMED BY GIVING 2 GLASSES OF WATER &
STICKING FINGER DOWN THROAT; NEVER GIVE ANYTHING TO AN UNCON
PERSON. GET MED ATTN. SKIN: REMOVE CONTAMD CLTHG & LAUNDER BEFORE
REUSE. WASH W/S OAP & WATER. REMOVE CONTAMD SHOES & DISCARD. GET
MED ATTN IF IRRIT PERSISTS. INHAL: REMOVE TO FRESH AIR, IF NOT
BRTHG GIVE ARTF RESP, PREF MOUTH-TO-MOUTH. IF BRTHG IS DFCLT GIVE
OXYGEN. GET (SUPDAT)

Fire Fighting

Flash Point Method:TCC
Flash Point:200F,93C
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS
.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:WIPE, SCRAPE/SOAK UP IN AN INERT MATL & PUT IN
CNTNR FOR DISP. WASH WALKING SURFS W/DETERGENT & WATER TO REDUCE
SLIPPING HAZ. WEAR PROPER PROT EQUIP AS SPECIFIED IN PROT EQUIP
SEC. WARN OTHER WORKERS OF SPILL. INCREASE AREA VENTILATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
AVOID BREATHING VAPORS, IF EXPOSED TO HIGH VAPOR CONCENTRATION,
LEAVE AREA AT ONCE.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES. USE ONLY IN WELL
VENTILATED AREA. KEEP AWAY FROM FOOD AND SMOKING MATERIALS. WASH
HANDS BEFORE EATING AND SMOKING. CAUTION.

Exposure Controls

Respiratory Protection:USE IN WELL VENTILATED AREA. USE NIOSH/MSHA
APPROVED RESPIRATORY PROTECTION IF TLV EXCEEDED OR OVEREXPOSURE IS
LIKELY.
Ventilation:LOCALIZED VENTILATION SHOULD BE USED TO CONTROL DUST
LEVELS. USE ONLY IN WELL VENTILATED AREA. MECHANICAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGG .
Other Protective Equipment:SHOWERS. ANSI APPRVD EYEWASH STATIONS.
RUBBER APRON. WEAR PROTECTIVE CLOTHING .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROCEDURES: MEDICAL ATTENTION. EYES: IMMEDIATELY FLUSH WITH
PLENTY OF WATER FOR AT LEAST 15 MINUTES AND GET MEDICAL ATTENTION
IMMEDIATELY AFTER FLUSHING.

Chemical Properties

Boiling Pt:B.P. Text:>545F,>285C
Vapor Pres:NEGLIGIBLE
Vapor Density:NEGLIGIBLE
Spec Gravity:1.61 (H*2O=1)
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE LIQUID, FATTY ACID ODOR.
Percent Volatiles by Volume:<4

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CARBON DIOXIDE, SILICON DIOXIDE, TIN
FUMES, FORMALDEHYDE.

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.