BWSDJ - M-15072 14-001, BATTERY PARTS (PLATES,GRIDS,ETC)
- MSDS: BWSDJ
- Manufacturer: CONCORDE BATTERY CORP
- Product Name: M-15072 14-001, BATTERY PARTS (PLATES,GRIDS,ETC)
- National Stock Number: 6140-00-195-5338
Product Identification
Product ID:M-15072 14-001, BATTERY PARTS (PLATES,GRIDS,ETC)
MSDS Date:04/09/1992
FSC:6140
NIIN:00-195-5338
MSDS Number: BWSDJ
Responsible Party
WEST COVINA, CA 91790-1006
US
Emergency Phone: 800-255-3924/818-813-1234
Info Phone: 818-962-4006/FAX 818-338-3549
Cage: 63017
Contractor
Telephone: 800-255-3924/818-813-1234
Cage: 63017
Ingredients
LEAD OXIDE, (RED LEAD OXIDE)
CAS: 1314-41-6
RTECS: OG5425000
Fraction By Weight: SEE #3%
OSHA PEL SEE 1910.1025
ACGIH TLV: 0.15 MG/M3
LEAD OXIDE (LITHARGE)
CAS: 1317-36-8
RTECS: OG1750000
Fraction By Weight: SEE #3%
LEAD OXIDE
CAS: 1309-60-0
RTECS: OG0700000
Fraction By Weight: 60%
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 38%
OSHA PEL SEE 1910.1025
ACGIH TLV: 0.15 MG/M3,DUST;9394
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
SULFURIC ACID (SARA III)
CAS: 7664-93-9
RTECS: WS5600000
Fraction By Weight: 20% %
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:DUST/VAPOR &/OR FUMES MAY BE
IRRITATING TO RESPIRATORY SYSTEM. SKIN:CAUSES IRRITATION.
EYES:CAUSE IRRITATION. INGEST:CAN RESULT IN BOTH ACUTE & CHRONIC
OVEREXPOSURE.
Explanation of Carcinogenicity:CONTAINS LEAD & CMPDS.
Effects of Overexposure:IRRITATION OF RESPIRATORY SYSTEM. SKIN/EYES
IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH W/COPIOUS QUANTITIES OF COOL WATER. GET IMMED MED
ATTN. SKIN:WASH THOROUGHLY WITH SOAP & WATER. INHAL:REMOVE FROM
EXPOSURE. GET MED ATTN. IF EXPERIENCING EFFECTS OF OVEREXPOSURE.
INGEST:GET IMMED MED ATTN.
Fire Fighting
Extinguishing Media:DRY CHEM OR CARBON DIOXIDE SHOULD BE USED ON
SURROUNDING FIRE. DO NOT USE WATER ON FIRES WHERE MOLTEN METAL IS
PRESENT.
Fire Fighting Procedures:USE FULL BODY PROTECTIVE CLOTHNG & FULL
FACEPIECE, SELF-CONTAINED BREATHING APPARATUS OPERATED IN A
POSITIVE-PRESSURE MODE.
Unusual Fire/Explosion Hazard:MOLTEN METLAS PRODUCE FUMES &/OR VAPO
THAT MAY BE TOXIC OR RESP IRRITANTS. PRODUCT CAN REACT VIGOROUSLY
W/STRONG OXIDIZING AGENTS.
Accidental Release
Spill Release Procedures:PROD ARE DRY PLATES;ACID APPEARS AS DRY ACID
INSTEAD OF LIQ BATTERY FLUID.NO LEAKAGE EXPECTED UNDER NORMAL
CONDITIONS/TRANSP.IN CASE OF ACCIDENTAL SPILLAGE OF PLATES,DUST OF
LEAD CMPD SHOULD BE VACUUM ED.PARTICULATE MATTER SHOULD BE STORED
IN (SUPPLE)
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:RESPIRATORY (AS SPECIFIED BY 29CFR1910.1025
SUBPART(F) OF FED OCCUPAT SAF & HEALTH ADM STD FOR OCCUP EXPO TO
LEAD) EQPMT SHOULD BE WORN IF LEAD DUST IS PRESENT.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:RUBBER GLOVES FOR NORMAL HANDLING.
Eye Protection:NONE SPECIFIED BY MANUFACTURER.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
PHYSICAL DATA:BOILING PTS/SPEC GRAVITY/MELTING PT/APPEARANCE:LEAD
OXIDE:2680F/9.5/1634F/YELLOWISH
RED;LEAD:>2709F/11.3/621-1112F/METALLIC SILVER
GRAY;H2SO4:275F/1.285/N/A/COLORLESS LIQ. SPILLS:DRY CNT NRS FOR
LATER DISPOSAL.DO NOT USE COMPRESSED AIR OR DRY SWEEPING AS MEANS
OF CLEANING. SEE SAME NSN PNIND:B.
Chemical Properties
HCC:Z7
Boiling Pt:B.P. Text:SUPPLEMENT
Melt/Freeze Pt:M.P/F.P Text:SUPPLEMENT
Spec Gravity:SUPPLEMENT
Appearance and Odor:PROD MFG BY PASTING LEAD OXIDE OVER LEAD FRAME,NO
TYP PHY DATA REFER TO PROD IT
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND THIS PRODUCT MAY LIBERATE HYDROGEN GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MOLTEN METALS PRODUCE FUMES &/OR
VAPORS THAT MAY BE TOXIC OR RESPIRATORY IRRITANTS.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS FOR LEAD COMPOUNDS. NO SIGNIFICANT RISK
LEVELS-SO AS TO NOT HAVE TO NOTIFY SURROUNDING COMMUNITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.