BWSZL - 105 H I PLUS GREASE
- MSDS: BWSZL
- Manufacturer: SOUTHWESTERN PETROLEUM CORP
- Product Name: 105 H I PLUS GREASE
- National Stock Number: 9150-01-345-6144
Product Identification
Product ID:105 H I PLUS GREASE
MSDS Date:04/22/1994
FSC:9150
NIIN:01-345-6144
MSDS Number: BWSZL
Responsible Party
FORT WORTH, TX 76101
US
Emergency Phone: 817-332-2336, CHEMTREC 800-424-9300
Info Phone: 817-332-2336
Cage: 14392
Contractor
Telephone: 817-348-7235
Cage: 14392
Ingredients
MINERAL OIL,HYDROTREATED (SEVERE), HEAVY NAPHTHENIC
CAS: 64742-52-5
RTECS: PY8035001
Fraction By Weight: 60-70%
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 30-40%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NOT EXPECTED TO PRESENT A
SIGNIFICANT HEALTH HAZARD UPON SHORT TERM EXPOSURE. CHRONIC:
PROLONGED AND/OR REPEATED CONTACT WITH THIS MATERIAL MAY PRODUCE
MILD SKIN IRRITATION AND INFLAMMATION.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:PERSONNEL WITH PRE-EXISTING SKIN
DISORDERS SHOULD AVOID CONTACT WITH THIS PRODUCT.
First Aid
First Aid:EYES- IMMEDIATELY FLUSH WITH WATER FOR 15 MINUTES. SKIN-
FLUSH WITH PLENTY OF WATER. INGESTION- INDUCE VOMITING IF MORE
THAN HALF CUP SWALLOWED. NEVER GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS PERSON . CALL PHYSICIAN. INHALATION- REMOVE TO FRESH
AIR.
Fire Fighting
Flash Point Method:COC
Flash Point:>354F,>179C
Autoignition Temp:Autoignition Temp Text:>343C
Lower Limits:0.9
Upper Limits:7
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL
FOAM.
Fire Fighting Procedures:USE WATER TO KEEP FIRE-EXPOSED CONTAINER COOL.
WATER SPRAY MAY BE USED TO FLUSH SPILLS AWAY FROM EXPOSURES.
Unusual Fire/Explosion Hazard:WATER FOR FOAM MAY CAUSE FROTHING.
Accidental Release
Spill Release Procedures:USE INERT ABSORBANT MATERIAL TO CONFINE SPILLS
AND TO ABSORB MATERIAL. SCOOP INTO A DISPOSABLE CONTAINER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NIOSH/MAH APPROVED RESPIRATORS TO MEET EXPOSURE
LIMITS.
Ventilation:ADEQUATE VENTILATION.
Protective Gloves:RECOMMENDED.
Eye Protection:GOGGLES OR FACE SHIELD.
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:V6
Vapor Density:>5
Spec Gravity:0.9
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER COLOR, LUBE OIL ODOR.
Percent Volatiles by Volume:NONE
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:HEAT AND IGNITION SOURCES.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:LAND FILL OR INCINERATE AS FEDERAL, STATE AND
LOCAL REGULATIONS PERMIT.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.