BWTWX - DU15005 DURETHANE ENAMEL

  • MSDS: BWTWX
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: DU15005 DURETHANE ENAMEL
  • National Stock Number: 8010-00F038391
Product Identification

Product ID:DU15005 DURETHANE ENAMEL
MSDS Date:11/16/1987
FSC:8010
NIIN:00F038391
MSDS Number: BWTWX

Responsible Party
PPG INDUSTRIES INC
260 KAPPA DR
PITTSBURGH, PA 15238-5000
US

Emergency Phone: 304-843-1300/412-963-5822

Info Phone: 412-963-5822/304-843-1300

Cage: PPG01

Contractor
PPG INDUSTRIES INC
PITTSBURGH, PA 15238-5000 US

Telephone: 412-963-5822/304-843-1300

Cage: PPG01

Ingredients

PIGMENTS

Fraction By Weight: <10%


BUTYL ACETATE (N-BUTYL ACETATE) *94-4*

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: <50%

OSHA PEL 150 PPM

ACGIH TLV: 150 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TOLUENE (IARC CARC- GROUP 3) *94-4*

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: <5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


FILM FORMERS, RESINS, AND ADDITIVES (PROPRIETARY)

Fraction By Weight: <50%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL. EYES: SEVERE
IRRITATION. SKIN: MODERATE IRRITATION. INHALATION: HARMFUL.
REPEATED EXPOSURE TO HIGH VAPOR CONCENTRATIONS MAY CAUSE IRRITATION
OF RESPIRATORY SYSTEM & PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, WATERING, HEADACHES, NAUSEA,
DIZZINESS, LOSS OF COORDINATION, REDNESS, ITCHING, BURNING
SENSATION, VISUAL DISTURBANCES, DRYNESS, CRACKING, SWELLING.

First Aid

First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH IMMEDIATELY
W/PLENTY OF WATER FOR 15 MINS. SKIN: REMOVE PROMPTLY BY WIPING,
FOLLOWED BY WATERLESS HAND CLEANER & SOAP & WATER. INHALATION:
REMOVE TO FRESH AIR. GIVE CPR/OTHER SUPPORTIVE MEASURES IF NEEDED.
OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:70F
Lower Limits:1.5
Extinguishing Media:CO2, DRY CHEMICAL, UNIVERSAL AQUEOUS FILM FORMING
FOAM.
Fire Fighting Procedures:WEAR SCBA. WATER SPRAY MAY BE INEFFECTIVE, BUT
MAY BE USED TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG
NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. EVACUATE &
ISOLATE AREA. REMOVE ALL IGNITION SOURCES. TAKE UP
W/SAWDUST/VERMICULITE/OTHER ABSORBENT MATERIAL & PLACE INTO
CONTAINERS FOR DISPOSAL.

Handling

Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED.
ISOLATE FROM HEAT/ELECTRICAL EQUIPMENT/SPARKS/OPEN FLAMES. DON'T
STORE >120F.
Other Precautions:DON'T APPLY TO HOT SURFACES. CONTAINERS SHOULD BE
GROUNDED WHEN POURING. AVOID FREE FALL OF LIQUIDS IN EXCESS OF A
FEW INCHES. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
INHALING CONTENTS CAN BE HARMFUL/FATAL.

Exposure Controls

Respiratory Protection:WEAR A NIOSH/MSHA APPROVED PAINT SPRAY/AIR
SUPPLIED RESPIRATOR.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST
Protective Gloves:POLYVINYL ALCOHOL/NEOPRENE/NITRILE
Eye Protection:CHEMICAL TYPE SPLASH GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING, IMPERMEABLE APRON, FULL
FACE SHIELD
Work Hygienic Practices:REMOVE/LAUNDER/DISCARD CONTAMINATED CLOTHING &
SHOES BEFORE REUSE.
Supplemental Safety and Health
STORE LARGE QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF
NFPA CLASS IB FLAMMABLE LIQUIDS.

Chemical Properties

Boiling Pt:B.P. Text:230-293F
Vapor Pres:9-11
Vapor Density:>1
Spec Gravity:0.1-1
Evaporation Rate & Reference:(BU O AC = 100): 109
Solubility in Water:0-1%
Percent Volatiles by Volume:51-62

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES/MINERAL ACIDS/OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME HEAT, ELECTRICAL EQUIPMENT,
SPARKS, OPEN FLAMES & OTHER IGNITION SOURCES.
Hazardous Decomposition Products:CO

Disposal

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.