BWYTY - AGARASE FROM PSEUDOMONAS ATLANTICA, A6306

  • MSDS: BWYTY
  • Manufacturer: SIGMA CHEMICAL CO
  • Product Name: AGARASE FROM PSEUDOMONAS ATLANTICA, A6306
  • National Stock Number: 6810-00N057740
Product Identification

Product ID:AGARASE FROM PSEUDOMONAS ATLANTICA, A6306
MSDS Date:04/05/1991
FSC:6810
NIIN:00N057740
MSDS Number: BWYTY

Responsible Party
SIGMA CHEMICAL CO
3050 SPRUCE ST
ST PAUL, MO 63103
US

Emergency Phone: 800-325-3010

Info Phone: 314-771-5765

Cage: 21076

Contractor
SIGMA CHEMICAL COMPANY
14508 ST LOUIS, MO 63178 US

Telephone: 314-771-5765

Cage: 21076

Ingredients

AGAROSE; (AGARASE FROM PSEUDOMONAS ATLANTICA)

CAS: 37288-57-6

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE HARMFUL BY INHALATION,
INGESTION OR SKIN ABSORPTION. MAY CAUSE IRRITATION. THE
TOXICOLOGICAL PROPERTIES HAVE NOT BEEN THOROUGHLY INVESTIGATED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PROLONGED OR REPEATED EXPOSURE MAY
CAUSE ALLERGIC REACTIONS IN CERTAIN SENSITIVE INDIVIDUALS.

First Aid

First Aid:INGEST: WASH OUT MOUTH W/WATER PROVIDED PERSON IS CONSCIOUS.
CALL MD. SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. REMOVE CONTAMD CLTHG & SHOES. CALL MD. INHAL: REMOVE TO
FRESH AIR. IF BREATHING BECOMES DIFFICULT, CALL MD. EYES: FLUSH
W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. ASSURE ADEQUATE
FLUSHING BY SEPARATING EYELIDS WITH FINGERS. CALL MD.

Fire Fighting

Extinguishing Media:WATER SPRAY. CARBON DIOXIDE, DRY CHEMICAL POWDER,
ALCOHOL OR POLYMER FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT. PREVENT CONTACT WITH SKIN & EYES.
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.

Accidental Release

Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT. SWEEP UP, PLACE IN
A BAG & HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST. VENT AREA &
WASH SPILL SITE AFTER MATERIAL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT & INHALATION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:WEAR APPOPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES.
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Appearance and Odor:SOLID.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF : CARBON MONOXIDE.
CARBON DIOXIDE.

Disposal

Waste Disposal Methods:DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE
SOLVENT & BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN AFTER
BURNER & SCRUBBER. OBSERVE ALL FEDERAL, STATE & LOCAL ENVIRONMENTAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.