BXBHP - W26XX REGENCY MODIFIED ACRYLIC GLOSS ENAMEL, W2600
- MSDS: BXBHP
- Manufacturer: AMERITONE PAINT CORP
- Product Name: W26XX REGENCY MODIFIED ACRYLIC GLOSS ENAMEL, W2600
- National Stock Number: 8010-00N058214
Product Identification
Product ID:W26XX REGENCY MODIFIED ACRYLIC GLOSS ENAMEL, W2600
MSDS Date:07/01/1993
FSC:8010
NIIN:00N058214
MSDS Number: BXBHP
Responsible Party
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 310-639-6791
Cage: FO133
Contractor
Telephone: 310-639-6791
Cage: FO133
Ingredients
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 40-45%
OSHA PEL N/K
ACGIH TLV: N/K
ACRYLIC RESIN
CAS: 29354-73-2
Fraction By Weight: 25%
OSHA PEL N/K
ACGIH TLV: N/K
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 25%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
0.22 @ 68F
CAS: 57-55-6
RTECS: TY2000000
Fraction By Weight: <5%
OSHA PEL N/K
ACGIH TLV: N/K
PROPIONIC ACID,2-METHYL-, MONOESTER WITH
CAS: 25265-77-4
RTECS: UF6000000
Fraction By Weight: <5%
OSHA PEL N/K
ACGIH TLV: N/K
1 @ 188F
RTECS: 9999999ZZ
METHANOL, (1H, 3H, 5H-OXAZOLO (3,4-C) OXAZOL-7A
CAS: 59720-42-2
RTECS: PC3330000
Fraction By Weight: <1%
OSHA PEL N/K
ACGIH TLV: N/K
(WATER) 2.59 LBS/GAL.
RTECS: 9999999VO
& SANDING DUST. WHEN USED IN RESTRICTED AREAS,
RTECS: 9999999ZZ
REMOVE A COMBINATION OF PARTICULATES & VAP. WHEN
RTECS: 9999999ZZ
SUPPLY RESP/HOODS. USE NIOSH/MSHA APPRVD RESP WHEN
RTECS: 9999999ZZ
COATED WITH THIS PRODUCT. FOLLOW RESP MFR'S
RTECS: 9999999ZZ
BELOW CURRENT APPLICABLE SFTY & HLTH STANDARDS IN
RTECS: 9999999ZZ
DUSTS OF DRIED COATING & DECOMP PRODUCT DURING
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: IRRIT OF RESP TRACT,
HDCH, NAUS, DIZZ. EYE/SKIN: MAY CAUSE IRRIT. INGEST: NO EFTS
ANTICIPATED FROM INGEST INCIDENTAL TO NORM USE. LARGER QTS MAY
CAUSE DISTRESS OF DIGESTIVE TRACT & NAUS. CHRONIC: PRLNG & RPTD
BRTHG OF SPRAY/MIST AND/SANDING DUST OVER PERIOD OF YEARS MAY CAUSE
DUST DISEASE OF LUNGS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE WHEN USED IN ACCORDANCE WITH
SAFE HANDLING AND USE INFORMATION. (SEE SAFE HANDLING AND STORAGE
PRECAUTIONS).
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. EYES: FLUSH WITH LARGE AMOUNTS OF
WATER FOR AT LEAST 15 MINUTES. GET MEDICAL ASSISTANCE. SKIN: REMOVE
WITH SOAP AND WATER. REMOVE SOILED CLOTHING. INGEST: DRINK ONE OR
TWO GLASSES OF WATER TO DILUTE. DO NOT INDUCE VOMITING. CONSULT
PHYSICIAN IMMEDIATELY. TREAT SYMPTOMATICALLY. NEVER GIVE ANYTHING
BY MOUTH TO AN UNCONSCIOUS PERSON.
Fire Fighting
Flash Point Method:SCC
Flash Point:NONE
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM/OTHER NATIONAL FIRE
PROTECTION ASSOCIATION (NFPA) APPROVED METHOD FOR TREATING A CLASS
B FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . SUMMON PROFESSIONAL FIREFIGHTERS. WATER
SPRAY MAY BE INEFFECTIVE. IF WATER IS USED, (SUP DAT)
Unusual Fire/Explosion Hazard:DUE TO PRESS BUILD-UP, CLOSED CONTRS
EXPOSED TO EXTREME HEAT MAY EXPLODE. AFTER WATER EVAPS, REMAINING
MATL WILL BURN. DURING EMER CNDTNS, OVEREXP TO (SUP DAT)
Accidental Release
Spill Release Procedures:WASH WITH WATER. BEFORE ATTEMPTING CLEAN-UP,
REFER TO HAZARD CAUTION INFORMATION IN OTHER SECTIONS OF THIS
MATERIAL SAFETY DATA FORM. CONTAIN SPILLED MATERIAL AND REMOVE WITH
INERT ABSORBENT. STORE IN CLOSED CONTAINER UNTIL PROPERLY DISPOSED
OF.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE BELOW 110F AND KEEP FROM
FREEZING. KEEP CONTAINER CLOSED WHEN NOT IN USE. DO NOT REUSE EMPTY
CONTAINERS.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:DO NOT BRTH VAPS, SPRAY MIST/SANDING DUST. WHEN
SPRAY APPLIED IN OUTDOOR/OPEN AREAS W/UNRESTRICTED VENT, & DURING
SANDING/GRINDING OPERATIONS, USE NIOSH/MSHA APPRVD MECH FILTER RESP
TO REMOVE SOLID AI RBORNE PARTICLES OF OVERSPRAY (ING 9)
Ventilation:USE ONLY W/ADEQ VENT. PROVIDE GEN DILUTION/LOC EXHAUST VENT
IN VOLUME & PATTERN TO KEEP AIR CONTAMINANT CONC (ING 13)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS EATING, SMOKING OR USING THE WASHROOM.
Supplemental Safety and Health
FIRE FIGHT PROC: FOG NOZZLES ARE PREFERABLE. IF EXPOSED TO FIRE/EXTREME
HEAT, WATER SHOULD BE USED TO COOL CLOSED CONTRS & PREVENT PRESS
BUILD-UP/POSS AUTO-IGNIT. EXPLO HAZ: DECOMP PRODS MAY CAUSE HLT H
HAZ. SYMPS MAY NOT BE IMMED APPARENT.OBTAIN MD ATTN.
Chemical Properties
Boiling Pt:B.P. Text:>212F,>100C
Vapor Density:LTR/AIR
Spec Gravity:1.23
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:72
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH MATERIALS THAT ARE INCOMPATIBLE WITH WATER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE HAZ FUMES WHEN HEATED TO
DECOMP. FUMES MAY CONTAIN CO, CO*2 & OXIDES OF METALS LISTED IN
INGREDIENTS.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.