BXDXX - RICH WOOD ACRYLIC URETHANE GLOSS VARNISH, 70 CLEAR
- MSDS: BXDXX
- Manufacturer: RICHARD'S PAINT MFG CO INC
- Product Name: RICH WOOD ACRYLIC URETHANE GLOSS VARNISH, 70 CLEAR
- National Stock Number: 8010-00N058158
Product Identification
Product ID:RICH WOOD ACRYLIC URETHANE GLOSS VARNISH, 70 CLEAR
MSDS Date:02/07/1992
FSC:8010
NIIN:00N058158
MSDS Number: BXDXX
Responsible Party
ROCKLEDGE, FL 32955
US
Emergency Phone: 407-636-6200
Info Phone: 407-636-6200
Cage: DO600
Contractor
Telephone: 407-636-6200
Cage: 0WRC5
Ingredients
NON-HAZARDOUS INGREDIENTS
OSHA PEL N/K
ACGIH TLV: N/K
COATING - 2.1 LB/GAL (252 G/L);
RTECS: 9999999VO
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:CAN CAUSE DIZZINESS, BREATHING
DIFFICULTIES, HEADACHES & LOSS OF COORDINATION. EYE CONTACT:CAN
CAUSE SEVERE IRRITATION, TEARING, REDNESS & BLURRED VISION. SKIN
CONTACT:CAN DRY & DEFAT SKIN CAUSI NG CRACKING, IRRITATION &
DERMATITIS. INGEST:CAN CAUSE GASTROINTESTINAL IRRITATION, VOMITING,
NAUSEA & DIARRHEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ANESTHESIA, RESPIRATORY TRACT
IRRITATION, DERMATITIS.
First Aid
First Aid:INHAL:MOVE PERSON TO FRESH AIR. IF BREATHING STOPS, APPLY
ARTF RESP & SEEK IMMEDIATE MEDICAL ATTENTION. EYE:FLUSH W/LARGE
QUANTITIES OF WATER FOR AT LEAST 15 MINUTES & SEEK IMMEDIATE
MEDICAL ATTENTION . SKIN:WASH THOROUGHLY W/SOAP & WATER. SEEK
MEDICAL ATTENTION. INGEST:DO NOT INDUCE VOMITING, CAN CAUSE
PNEUMONITIS & PULMONARY EDEMA.
Fire Fighting
Flash Point Method:TCC
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . WATER SHOULD NOT BE USED, EXCEPT AS A FOG TO KEEP
NEARBY CONTAINERS COOL.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES, PROVIDE GOOD
VENTILATION, DIKE SPILL AREA & COVER W/INERT, ABSORBENT MATERIAL &
REMOVE TO A DISPOSAL CONTAINER. OBSERVE ALL RELEVANT FEDERAL, STATE
& LOCAL LAWS FOR DIS POSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID HOT METAL SURFACES. USE ONLY IN
WELL VENTILATED AREAS. KEEP CONTAINERS CLOSED WHEN NOT IN USE. KEEP
AWAY FROM EXTREME HEAT & OPEN FLAMES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:WHEN SPRAYING THIS MATL, USE NIOSH/MSHA APPRVD
CARTRIDGE RESP SUITABLE TO KEEP AIRBORNE MISTS & VAPS BELOW TIME
WEIGHTED LIM VALUE. WHEN USING IN POORLY VENTILATED/CONFINED AREAS,
USE NIOSH/MSHA APPRV D FRESH AIR SUPPLY RESP/SCBA.
Ventilation:GEN MECH VENT/LOC EXHST SHOULD BE SUITABLE TO KEEP CONCS
BELOW TLV. VENT EQUIP SHOULD BE EXPLOSION PROOF.
Protective Gloves:IMPERMEABLE, CHEM HNDLG GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:USE IMPERMEABLE APRONS & PROT CLTHG WHENEVER
POSS TO PVNT SKIN CONT. USE OF HEAD CAPS WHENEVER POSS IS ALSO
(SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EYE PROT:& FULL LENGTH FACESHIELD . OTHER PROT EQUIP:STRONGLY
RECOMMENDED. EYE WASH STATIONS & SAFETY SHOWERS IN THE WORKPLACE
ARE STRONGLY RECOMMENDED.
Chemical Properties
Vapor Density:HVR/AIR
Spec Gravity:1 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:SOLUBLE
Stability
Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIAL, STRONG ACIDS, OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT, POOR VENTILATION,
CORROSIVE ATMOSPHERE, EXCESSIVE AGING.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE.
Disposal
Waste Disposal Methods:CONSULT ALL FEDERAL, STATE & LOCAL HAZARDOUS
WASTE REGULATIONS BEFORE DISPOSING INTO APPROVED HAZARDOUS WASTE
LANDFILLS. OBEY ALL RELEVANT LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.