BXFHD - FLEX-ZAP

  • MSDS: BXFHD
  • Manufacturer: PACER TECHNOLOGY
  • Product Name: FLEX-ZAP
  • National Stock Number: 6810-00N058643
Product Identification

Product ID:FLEX-ZAP
MSDS Date:11/07/1989
FSC:6810
NIIN:00N058643
MSDS Number: BXFHD

Responsible Party
PACER TECHNOLOGY
9420 SANTA ANITA AVE
RANCHO CUCAMONGA, CA 91730
US

Emergency Phone: 714-987-0550

Info Phone: 714-987-0550

Cage: 62530

Contractor
PACER TECHNOLOGY
RANCHO CUCAMONGA, CA 91730 US

Telephone: 909-987-0550

Cage: 62530

Ingredients

2-PROPENOIC ACID, 2-CYANO-, ETHYL ESTER;

CAS: 7085-85-0

RTECS: UD3330000

OSHA PEL N/K

ACGIH TLV: N/K


POLYMETHYLMETHACRYLATE; (PMMA)

CAS: 9011-14-7

RTECS: TR0400000

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:LD50:(ORAL) 12.2 CC/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:IRRITATES EYES, MUCOUS
MEMBRANES. TEARING FROM EYE IRRITATION & MUCOUS MEMBRANES W/SOME
COUGHING. CHRONIC:NO RESIDUAL EFFECTS OF ACUTE PROPERTIES. CONTAINS
PMMA - IMPLANTATION UNDER SKIN OF EXPE RIMENTAL ANIMALS CAUSED
TUMORS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, EYE &
RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE.

First Aid

First Aid:INGEST:CALL MD IMMEDIATELY . EYES:IMMEDIATELY FLUSH W/POTABLE
WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD .
INHAL:REMOVE TO FRESH AIR. SKIN:FLUSH AREAS OF CONTACT W/WATER. W
IPE AWAY LIQUID ADHESIVE WHERE POSSIBLEW/RESIDUALS BEING REJECTED
BY SOAKING IN WATER.

Fire Fighting

Flash Point Method:TCC
Flash Point:176F,80C
Extinguishing Media:FLUSH W/LARGE AMOUNTS OF WATER OR DRY CHEMICAL
EXTINGUISHER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE. COMBUSTIBLE REQUIRING ABOVE
PROCEDURES.

Accidental Release

Spill Release Procedures:ABSORB W/PAPER TOWELS OR CLOTH. SWEEP INTO
TRAY FOR LIQUID TO BE REACTED W/WATER FOR SOLID WASTE TREATMENT.
AVOID OVEREXPOSURE TO FUMES W/LARGE SPILLS & POOR VENTILATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID MOISTURE, DIRECT UV-SUNLIGHT &
DO NOT STORE >25C. KEEP CONTAINERS CLOSED TIGHTLY WHEN NOT IN USE.
IDEAL STORAGE IS AT 5-10C.
Other Precautions:AVOID BREATHING VAPOR, CONTACT W/EYES & SKIN. DO NOT
STORE AT -5C WHICH FREEZES PRODUCT TO USELESS STATE. PRODUCT NOT
DAMAGED BY FREEZING.

Exposure Controls

Respiratory Protection:NORMALLY NOT NECESSARY. A NIOSH/MSHA APPROVED
ORGANIC VAPOR CANISTER MAY BE USED.
Ventilation:LOCAL EXHAUST:TO ELIMINATE EYE IRRITATION. MECHANICAL
(GENERAL): LARGE QUANTITIES USED TO 2 PPM.
Protective Gloves:VINYL(POLYETHYLENE) NON-STICKING GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . NORMALLY NOT USED, HOWEVER, APRON (SUPP
DATA)
Work Hygienic Practices:SOAP & WATER HELPS REMOVE ADHESIVE FROM SKIN.
Supplemental Safety and Health
SOL IN H*2O:MATERIAL REACTS TO HARDENED MASS FOR NON-HAZARDOUS WASTE.
OTHER PROT EQUIP:PROTECTS CLOTHING FROM HARDENED GLUE.

Chemical Properties

Boiling Pt:B.P. Text:149F,65C
Vapor Pres:1 @ 20C
Vapor Density:NIL
Spec Gravity:1.05 (H*2O=1)
Evaporation Rate & Reference:NIL (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE AS(SUPDAT)
Appearance and Odor:TRANSPARENT WATER-WHITE TO STRAW COLORED LIQUID
W/STIMULATIVE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
POLYMERIZED BY WATER, ALCOHOL, AMINES & ALKALINE MATERIALS.
Stability Condition to Avoid:EXCESSIVE HEAT >176F, MOISTURE & DIRECT
UV. STORE IN A COOL PLACE FOR BEST PROPERTIES & SHELF LIFE.
Hazardous Decomposition Products:TYPICAL COMBUSTIBLE BY-PRODUCTS OF
CARBON MONOXIDE & DIOXIDE.

Disposal

Waste Disposal Methods:INCINERATE SOLID COMBUSTIBLE WASTE OR DUMP AS
CHEMICAL WASTE ACCORDING TO LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.