BXFND - POLYMER 1160XL

  • MSDS: BXFND
  • Manufacturer: BETZ LABORATORIES INC
  • Product Name: POLYMER 1160XL
  • National Stock Number: 6810-00N058885
Product Identification

Product ID:POLYMER 1160XL
MSDS Date:08/09/1989
FSC:6810
NIIN:00N058885
MSDS Number: BXFND

Responsible Party
BETZ LABORATORIES INC
4636 SOMERTON RD
TREVOSE, PA 19047
US

Emergency Phone: 215-355-3300

Info Phone: 215-355-3300

Cage: 24774

Contractor
BETZDEARBORN INC.
TREVOSE, PA 19053 US

Telephone: 215-355-3300

Cage: 24774

Ingredients

KETROSENE (PETROLEUM), HYDROTREATED; (ISOPARAFFINIC

CAS: 64742-47-8

RTECS: OA5504000

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN:MODERATELY IRRITATING. MAY
CAUSE DERMATITIS. EXCESSIVE DERMAL EXPOSURE CAUSES DEFATTING &
DRYING. EYE:MODERATELY IRRITATING. INHAL:VAPORS, GASES, MISTS &/OR
AEROSOLS MAY CAUSE IRRITATION TO UPPER RESPIRATORY TRACT.
EXCESSIVE INHALATION OF VAPORS CAUSES DIZZINESS, HEADACHE & NAUSEA.
CHRONIC: (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:PROLONGED OR REPEATED EXPOSURE MAY
CAUSE CNS DEPRESSION; MAY CAUSE DEFATTING-TYPE DERMATITIS.
Medical Cond Aggravated by Exposure:NOT KNOWN.

First Aid

First Aid:SKIN:REMOVE CONTAM CLTHG. WASH EXPOS AREA W/LG QTY OF SOAP
SOLN/WATER FOR 15 MINS. EYE:IMMED FLUSH W/WATER FOR AT LST 15 MINS.
IMMED CONT MD FOR ADDNL TREATMENT. INHAL:REMOVE VICTIM FROM CONTAM
AREA T O FRESH AIR. APPLY APPROP FIRST AID TREATMENT AS NEC.
INGEST:DO NOT FEED ANYTHING BY MOUTH TO UNCON/CONVULSIVE VICTIM. DO
NOT INDUCE VOMIT. IMMED CONT MD. DILUTE CONTENTS OF STOM USING 3-4
(SUPP DATA)

Fire Fighting

Flash Point Method:PMCC
Flash Point:>200F,>93C
Extinguishing Media:DRY CHEMICAL, CO*2, FOAM OR WATER. SLIPPERY
CONDITION. USE SAND/GRIT.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:VENTILATE AREA, USE SPECIFIED PROT EQUIP.
CONTAIN & ABSORB ON ABSORB MATL. PLACE IN WASTE DISP CNTNR. WASTE
CHARACTS OF ABSORBED MATL/ANY CONTAM SOIL, SHOULD BE DETERMINED
I/A/W RCRA REGS. FLUSH AREA W/WATER. WET AREA MAY BE SLIPPERY.
SPREAD (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP DRUMS & PAILS CLOSED WHEN NOT IN
USE. STORE IN COOL, DRY LOCATION AWAY FROM ACIDS & ALKALIES.
Other Precautions:NORMAL CHEMICAL HANDLING. IRRITANT.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS W/IN USE
LIMITATIONS OR ELSE USE NIOSH/MSHA APPRVD SUPPLIED AIR RESPS. IF
VENT IN INADEQ OR SIGNIFICANT PRODUCT EXPOSURE IS LIKELY, USE A
NIOSH/MSHA APPROVED RESP W /ORGANIC VAPOR CARTRIDGE.
Ventilation:ADEQUATE VENTILATION TO MAINTAIN AIR CONTAMINANTS BELOW
EXPOSURE LIMITS.
Protective Gloves:NEOPRENE GLOVES. WASH OFF AFTER (SUPDAT)
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . USE PROT EQIUP I/A/W 29 CFR 1910.132-134.
Work Hygienic Practices:IMMEDIATELY REMOVE CONTAMINATED CLOTHING, WASH
BEFORE REUSE.
Supplemental Safety and Health
PH:4.6 (1% DISP). FIRST AID PROC:GLASSES MILK/WATER. SPILL
PROC:SAND/GRIT. TREAT AS OIL SPILL. PROT GLOVES:EACH USE. REPLACE
AS NECESSARY.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:17.0F,-8.3C
Vapor Pres:19
Vapor Density:>1
Spec Gravity:1.105
pH:SUPDAT
Solubility in Water:1%
Appearance and Odor:WHITE, EMULSION; HYDROCARBON ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
MAY REACT W/STRONG OXIDIZERS.
Stability Condition to Avoid:DO NOT CONTAMINATE. BETZ TANK CLEAN-OUT
CATEGORY 'B'.
Hazardous Decomposition Products:THERMAL DECOMPOSITION (DESTRUCTIVE
FIRES) YIELDS ELEMENTAL OXIDES.

Disposal

Waste Disposal Methods:WATER CONTAMINATED W/THIS PRODUCT MAY BE SENT TO
A SANITARY SEWER TREATMENT FACILITY, I/A/W ANY LOCAL, STATE OR
FEDERAL AGREEMENT, PERMITTED WASTE TREATMENT FACILITY/DISCHARGED
UNDER A NPDES PERMIT PR OD (AS IS) - INCIN/BURY IN APPROVED
LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.