Product ID:RTV162
MSDS Date:10/25/1995
FSC:8040
NIIN:00-118-2695
Kit Part:Y
MSDS Number: BXFPK

GE SILICONES

260 HUDSON RIVER ROAD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Info Phone: 518-237-3330

Preparer: D.A.POLSINELLI

Cage: GESIL

GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT

WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

METHYLTRIMETHOXYSILANE (TERMED 'HAZARDOUS' BY MFR.)

CAS: 1185-55-3

RTECS: VV4650000

Fraction By Weight: 1-5%

TRADE SECRET COMPONENT (TERMED 'HAZARDOUS' BY MFR.)

Fraction By Weight: 1-5%

POLY (DIMETHYLSILOXANE) (TERMED 'NON-HAZARDOUS' BY MFR.)

CAS: 63148-62-9

RTECS: JJ6484500

Fraction By Weight: 5-10%

TRADE SECRET (TERMED 'NON-HAZARDOUS' BY MFR.)

Fraction By Weight: 10-30%

OSHA PEL 15MG/M3

POLYDIMETHYLSILOXANE (TERMED 'NON-HAZARDOUS' BY MFR.)

CAS: 70131-67-8

Fraction By Weight: 60-80%

LD50 LC50 Mixture:LD50 OF MIXTURE IS UNKNOWN.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: MAY BE HARMFUL IF
SWALLOWED. SKIN: UNCURED PRODUCT CONTACT MAY IRRITATE SKIN.
INHALATION: UNCURED PRODUCT CAUSES MILD RESPIRATORY IRRITATION.
EYE: UNCURED PRODUCT IRRITATES EYES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:IRRITATION.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:INGESTION-DO NOT INDUCE VOMITING. SLOWLY DILUTE WITH 1-2
GLASSES OF WATER OR MILK & SEEK MEDICAL ATTENTION. SKIN-REMOVE
COMPLETLEY WITH A DRY CLOTH OR PAPER TOWEL, BEFORE WASHING WITH
DETERGRNT AND WA TER. GET MEDICAL ATTENTION. INHALATION-REMOVE
PERSON TO FRESH AIR. EYE-IMMEDIATELY FLUSH EYES WITH PLENTY OF
WATER FOR AT LEAST 15 MIN & GET MEDICAL ATTENTION IF IRRITATION
PERSISTS.

Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.
Fire Fighting Procedures:NONE KNOWN.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:WIPE, SCRAP OR SOAK UP IN AN INERT MATERIAL
AND PUT IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES WITH
DETERGENT AND WATER TO REDUCE SLIPPING HAZARD. WEAR PROPER
PROTECTIVE EQUIPMENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PRODUCT RELEASES METHANOL DURING
APPLICATION AND CURING. REMOVE CONTACT LENSES BEFORE USING SEALANT.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES. USE ONLY IN WELL
VENTILATED AREAS. UNCURED PRODUCT CONTACT IRRITATES EYES.

Respiratory Protection:USE IN WELL VENTILATED AREAS.
Ventilation:USE ONLY IN WELL VENTILATED AREAS.
Protective Gloves:CLOTH GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NONE KNOWN.
Work Hygienic Practices:EYE WASH STATION.
Supplemental Safety and Health
USE IN WELL VENTILATED AREA.

HCC:N1
Vapor Pres:NEGLIGIBLE
Vapor Density:NEGLIGIBLE
Spec Gravity:1.085
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID, WHITE, SWEET ODOR.
Percent Volatiles by Volume:<4

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
SILICON DIOXIDE, METHANOL, FORMALDEHYDE.

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.