BXFWD - PARKER O-LUBE
- MSDS: BXFWD
- Manufacturer: PARKER HANNIFIN CORP
- Product Name: PARKER O-LUBE
- National Stock Number: 9150-01-350-5196
Product Identification
Product ID:PARKER O-LUBE
MSDS Date:03/12/1986
FSC:9150
NIIN:01-350-5196
MSDS Number: BXFWD
Responsible Party
CULVER CITY, CA 90230-3582
US
Emergency Phone: 213-204-3000
Info Phone: 213-204-3000
Cage: 02697
Contractor
Telephone: 606-269-2351
Cage: 02697
Ingredients
DISTILLATES, CLAY-TREATED HEAVY PARAFFINIC
CAS: 64742-36-5
Fraction By Weight: 70-75%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
BARIUM SOAP
Fraction By Weight: 25-30%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MODERATE IRRITATION, REDNESS,
TEARING. SKIN: SLIGHT IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES, LIFTING EYELIDS OCCASIONALLY. SEEK MD ATTENTION. SKIN:
WASH EXPOSED AREA WITH SOAP AND WATER. INHAL: REMOVE TO FRESH AIR.
SUPPORT BREAT HING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . INGEST:
IMMEDIATELY DRINK TWO GLASSES OF WATER. INDUCE VOMITING. SEEK
MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:COC
Flash Point:435F,224C
Extinguishing Media:FOAM, CARBON DIOXIDE, AND DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER/FOAM MAY CAUSE FROTHING WHICH CAN BE VIOLENT, ESPECIALLY IF
SPRAYED INTO CONTRS OF HOT, BURNING LIQ.
Unusual Fire/Explosion Hazard:NEVER USE WELDING OR CUTTING TORCH
ON/NEAR (EVEN EMPTY) BECAUSE PRODUCT (EVEN JUST RESIDUE) CAN IGNITE
EXPLOSIVELY.
Accidental Release
Spill Release Procedures:SMALL SPILLS: COLLECT IN BEAKER. LARGE SPILLS:
PERSONS NOT WEARING PROTECTIVE EQUIPMENT SHOULD BE EXCLUDED FROM
AREA OF SPILL UNTIL CLEANUP HAS BEEN COMPLETED. SHOVEL MATERIAL
INTO CONTAINERS. REMAINI NG MATERIAL MAY BE TAKEN UP
W/ABSORBENTMATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NORMAL PRECAUTIONS. AVOID FIRE
HAZARDS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:RECOMMENDED MECHANICAL VENTILATION.
Protective Gloves:NITRILE/NEOPRENE RUBBER.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:700F,371C
Spec Gravity:<1.0 (H*2O = 1)
Evaporation Rate & Reference:<1.0 (ETHER = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SEMI-SOLID, AMBER COLOR WITH NO ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:TEMPERATURES OVER 600 F.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, AND
VARIOUS HYDROCARBONS.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.