BXGRQ - "VITON" A, VIT 001

Product Identification

Product ID:"VITON" A, VIT 001
MSDS Date:09/28/1992
FSC:9330
NIIN:00N059280
MSDS Number: BXGRQ

Responsible Party
E I DUPONT DE NEMOURS & CO
1007 MARKET STREET
WILMINGTON, DE 19898
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 800-441-7515

Preparer: W. H. MARTIN

Cage: 0ERJ7

Contractor
E.I. DUPONT DE NEMOURS & CO
WILMINGTON, DE 19898 US

Telephone: 800-441-7515;800-441-9442

Cage: 18873

Ingredients

WEAR HEAT RESISTANT CLOTHING AND FOOTWEAR.

RTECS: 9999999ZZ


PRECAUTIONS FOR "VITON" AND RELATED CHEMICALS."

RTECS: 9999999ZZ


1-PROPENE,1,1,2,3,3,3-HEXAFLUORO-, POLYMER WITH

CAS: 9011-17-0

Fraction By Weight: >99%

OSHA PEL N/K

ACGIH TLV: N/K


BARIUM SULFATE

CAS: 7727-43-7

RTECS: CR0600000

Fraction By Weight: <10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


POLYETHYLENE, HF CAN BARELY BE DETECTED UNDER SAME

RTECS: 9999999ZZ


ADEQ VENT SHOULD BE PROVIDED. IN ALL CASES, POSS OF

RTECS: 9999999ZZ


@ TEMPS >316C (600F), SURF OF PARTS MAY CNTN HF/HF

RTECS: 9999999ZZ


DELAYED FOR SEVERAL HRS. WEAR NEOPRENE/PVC (IF TEMP

RTECS: 9999999ZZ


EXPOS TO SUCH HIGH TEMPS. IF CONDENSATE IS EXPECTED,

RTECS: 9999999ZZ


HYDROXIDE SOLUTION). DISCARD GLOVES.

RTECS: 9999999ZZ


RASH. SIGNIFICANT PERMEATION & SYSTEMIC TOX

RTECS: 9999999ZZ


HUMAN SENSIT. EYE CONT W/UNCURED POLYM MAY CAUSE

RTECS: 9999999ZZ


FUMES FROM BURNING POLYM MAY CAUSE TEMPORARY LUNG

RTECS: 9999999ZZ


OF BRTH. HIGHER EXPOS TO FUMES FROM BURNING MATL MAY

RTECS: 9999999ZZ


WHEEZING, ABNORM LUNG SOUNDS POSS PROGRESSING TO SEV

RTECS: 9999999ZZ


SYMPS MAY BE DELAYED. PROMPT MED ATTN IS REQ. SMKERS

RTECS: 9999999ZZ


WASH THEIR HANDS BEFORE SMOKING.

RTECS: 9999999ZZ


FLUSH W/PLENTY OF WATER

RTECS: 9999999ZZ


NO SPECIFIC INTERVENTION IS INDICATED AS CMPD

RTECS: 9999999ZZ


CONC BELOW OSHA PEL OF 3 PPM.

RTECS: 9999999ZZ


AND FULL LENGTH FACE SHIELD .

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:LD50(ORAL,RAT):>5,000 MG/KG ALD
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ANIMAL DATA:UNCURED POLYM PRDCED MILD
IRRIT ON RABBIT SKIN, BUT DID NOT CAUSE SKIN SENSIT. CLASSIFIED AS
"NON-IRRIT" WHEN TESTED BY OECD PROTOCOL ON RABBITS. AQUEOUS LATEX
DISPERSIONS OF POLYM CAUSES SLIGHT EYE IRRIT. RPTD ORAL DOSES OF
POLYM CAUSED ENLARGEMENTS & FATTY DEGENERATION OF LIVER. THESE
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:LIVER EFTS DIMINISHED AFTER 14 DAY
RECOVERY PERIOD. SINGLE INHAL EXPOS TO THERMAL DECOMP PRODS OF
POLYM INCLUDE RESP IRRIT & PULM EDEMA. RPTD EXPOS TO SUB-LETHAL
LEVELS OF THERMAL DECOMP PRO DS CAUSED LABORED BRTHG & EMPHYSEMA.
HUMAN EFTS TO ING 1:SKIN CONT W/UNCURED POLYM MAY CAUSE IRRIT
W/DISCOMFORT/(ING 9)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:NO SPEC INTERVENTION IS INDICATED AS CMPD IS NOT LIKELY
TO BE HAZ BY INHAL. CONSULT MD IF NEC. IF EXPOSED TO FUMES FROM
OVERHEATING/COMBUST, MOVE TO FRESH AIR. CONSULT MD IF SYMPS
PERSIST. SKIN: CMPD IS NOT LIKELY TO BE HAZ BY CONT, BUT CLEANSING
AFTER USE IS ADVISABLE. IF MOLTEN POLYM GETS ON SKIN:COOL RAPIDLY
W/COLD WATER. DO NOT ATTEMPT TO PEEL POLYM. OBTAIN MED TREATMENT
FOR (ING 16)

Fire Fighting

Flash Point Method:OC
Flash Point:>399F,>204C
Extinguishing Media:WATER. FOAM. DRY CHEMICAL. CO*2.
Fire Fighting Procedures:DOES NOT BURN W/OUT EXTERNAL FLAME. WEAR
NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP . TO PROT FROM HYDROGEN
FLUORIDE FUMES, WHICH REACT W/WATER TO (SUPDAT)
Unusual Fire/Explosion Hazard:PELLET FORM MAY ACCUM STATIC CHARGE WHEN
POURED FROM ONE CNTNR TO ANOTHER. HAZ GASES/VAPS PRDCED IN FIRE ARE
HYDROGEN FLUORIDE (HF), CARBONYL FLUORIDE, (SUPDAT)

Accidental Release

Spill Release Procedures:REVIEW FIRE AND EXPLOSION HAZARDS AND SAFETY
PRECAUTIONS BEFORE PROCEEDING WITH CLEAN UP. USE APPROPRIATE
PERSONAL PROTECTIVE EQUIPMENT DURING CLEAN UP. SWEEP UP TO PREVENT
SLIPPING HAZARDS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. KEEP
CONTAINERS TIGHTLY CLOSED TO PREVENT MOISTURE ABSORPTION AND
CONTAMINATION.
Other Precautions:PROVIDE GROUNDING OF EQUIP WHEN HNDLNG PELLET FORM TO
PVNT STATIC BUILD-UP. AVOID CONTAM OF CIGARETTES/TOBACCO W/POLYMER.
DO NOT TOUCH DECOMPOSED PARTS OF "VITON" EVEN WHEN COOL. BEFORE
USING, READ BU LLETIN VT-100.1 (4/87) "HNDLG (ING 21)

Exposure Controls

Respiratory Protection:WHEN TEMPERATURES EXCEED 200C AND VENTILATION IS
INADEQUATE TO MAINTAIN CONCENTRATIONS BELOW EXPOSURE LIMITS, USE A
NIOSH/MSHA APPROVED POSITIVE PRESSURE AIR SUPPLIED RESPIRATOR. AIR
PURIFYING RESPIRA TORS MAY NOT PROVIDE ADEQUATE PROT.
Ventilation:VAPS & FUMES LIBERATED DURING HOT PROCESSING SHOULD BE
EXHSTED FROM WORK AREAS TO MAINTAIN HYDROGEN FLUORIDE (ING 18)
Protective Gloves:NEOPRENE GLOVES RECOMMENDED.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(ING 19)
Other Protective Equipment:EMER EYE WASH & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . IF THERE IS POTNTL CONT W/HOT/MOLTEN
MATL,(ING 20)
Work Hygienic Practices:SMOKERS SHOULD AVOID CONTAM OF TOBACCO PRODS
W/POLYM & SHOULD WASH THEIR HANDS BEFORE SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:FORM HYDROFLUORIC ACID. WEAR NEOPRENE GLOVES WHEN HNDLG
REFUSE FROM FIRE INVOLVING "VITON". EXPLO HAZS:CARBON MONOXIDE &
LOW MOLECULAR WEIGHT FLUOROCARBONS. CNDTNS (STAB):RELATED CHEMS ".
HAZ DECOMP PRODS:(500F)/FOR 30 MIN/300C (572F) YIELDS ONLY TRACES
OF HYDROGEN FLUORIDE (HF). @ 2% IN (ING 3)

Chemical Properties

Spec Gravity:1.77-1.86
Solubility in Water:INSOLUBLE
Appearance and Odor:PELLETS, CHIPS OR SHEETS WITH NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
FINELY DIVIDED METALS SUCH AS ALUMINUM. COMPOUNDING W/METAL POWDERS
PRESENTS AN EXPLOSION HAZARD.
Stability Condition to Avoid:TEMPS >200C W/OUT ADEQ VENT WHEN CMPDG
INGS ARE PRESENT. SEE BULLETIN VT-100.1 (4/87) "HNDLG PREC FOR
"VITON" & (SUPDAT)
Hazardous Decomposition Products:HYDROGEN FLUORIDE (HF) &
PERFLUOROOLEFINS. OSHA PEL FOR HF IS 3PPM. "VITON" A ITSELF HEATED
FOR 60 MIN/260 C (SUPP DATA)

Disposal

Waste Disposal Methods:PREF OPTIONS FOR DISP ARE (1)RECYCLING &
(2)LANDFILL. INCIN ONLY IF INCIN IS CAPABLE OF SCRUBBING OUT
HYDROGEN FLUORIDE & OTHER ACIDIC COMBUST PRODS. TREATMENT, STOR,
TRANSPORTATION & DISP MUST BE IN ACCORD W/APPLIC FED,
STATE/PROVINCIAL, & LOC REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.