Product ID:MIRACAST
MSDS Date:09/14/1994
FSC:6520
NIIN:00F012050
MSDS Number: BXKHT

NEY J M CO THE

2 DOUGLAS ST - NEY INDUSTRIAL PK
BLOOMFIELD, CT 06002-5000
US

Emergency Phone: 800-243-1942/203-242-2281

Info Phone: 800-243-1942/203-242-2281

Cage: 43710

NEY DENTAL INCORPORATED

BLOOMFIELD, CT 06002-5000 US

Telephone: 800-243-1942/203-242-2281

Cage: 43710

SILVER

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 90%

OSHA PEL 0.01 MG/CUM

ACGIH TLV: 0.1 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

COPPER (DUST & MIST), BRONZE POWDER

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 38%

OSHA PEL 0.1 MG(CU)/M3 (FUME)

ACGIH TLV: 0.2 MG/M3 (FUME)

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ZINC

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 7%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SILVER-GRAY SKIN PIGMENTATION.
COPPER-GASTROINTESTINAL TRACT EFFECTS. ZINC-SKIN IRRITANT,
PULMONARY SYSTEM EFFECTS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SILVER-GRAY SKIN PIGMENTATION.
COPPER-GASTROINTESTINAL TRACT EFFECTS. ZINC-SKIN IRRITANT,
PULMONARY SYSTEM EFFECTS.

First Aid:REMOVE FROM EXPOSURE, OBTAIN MEDICAL ATTENTION IN ALL CASES.

Unusual Fire/Explosion Hazard:ZINC DUST & SILVER DUST-MODERATE FIRE
HAZARD.

Spill Release Procedures:LARGE: USE INDUSTRIAL VACUUM TO CLEAN UP.
MOLTEN METAL SHOULD BE ALLOWED TO SOLIDIFY BEFORE CLEAN UP.

Handling and Storage Precautions:NONE
Other Precautions:AVOID CUTS & BURNS.

Respiratory Protection:USE IAW/NIOSH 29CFR1910 WHEN CUTTING, GRINDING,
SOLDERING/WELDING.
Ventilation:LOCAL EXHAUST WHEN GENERATING DUST, MIST, FUMES TO MAINTAIN
EXPOSURE LIMITS BELOW TLV.
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Supplemental Safety and Health
APPEARANCE CONT'D: ALLOY PRODUCTS ARE SOLID METALS SHAPED AS WIRE,
PLATE, STRIP/IN FINISHED FORMS AS INGOTS, NUGGETS, ELECTRICAL
CONTACT ASSEMBLIES, SWITCHES/AS OTHER FORMS FOR ELECTRONIC & DENTAL
USE .

Appearance and Odor:(SEE SUPPLEMENTAL DATA)

Stability Indicator/Materials to Avoid:YES

Waste Disposal Methods:MOLTEN METALS SHOULD BE RECLAIMED USING STANDARD
INDUSTRIAL PRACTICES SUCH AS REMELTING & REFINING. DISPOSE OF IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.