BXLLF - AS9174000 EA 934NA SYSTEM

  • MSDS: BXLLF
  • Manufacturer: STEVEN INDUSTRIES
  • Product Name: AS9174000 EA 934NA SYSTEM
  • National Stock Number: 8040-00F040373
Product Identification

Product ID:AS9174000 EA 934NA SYSTEM
MSDS Date:05/07/1993
FSC:8040
NIIN:00F040373
Kit Part:Y
MSDS Number: BXLLF

Responsible Party
STEVEN INDUSTRIES
39 AVENUE C
BAYONNE, NJ 07002-3417
US

Cage: 33150

Contractor
STEVEN INDUSTRIES
8 BAYONNE, NJ 07002-3417 US

Telephone: 201-437-6501

Cage: 33150

Ingredients

DIMER FATTY ACIDS, TALL OIL FATTY ACIDS,

CAS: 68082-29-1

Fraction By Weight: 40-70%


DIETHYLENETRIAMINE, ETHYLENEDIAMINE, N-(2-AMINOETHYL)

CAS: 111-40-0

RTECS: IE1225000

Fraction By Weight: 10-30%

ACGIH TLV: 1 PPM (SKIN)


TRIETHYLENETETRAMINE, EPOXY HARDNER

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: 5-10%


<10 G/L

RTECS: 9999999VO

Hazards

LD50 LC50 Mixture:ORAL LD50(RAT): >2000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION. MATERIAL IS
CORROSIVE. BRIEF CONTACT MAY CAUSE CHEMICAL BURNS.
PROLONGED/REPEATED CONTACT MAY RESULT IN BURNS & POSSIBLE ALLERGIC
SENSITIZATION. INHALATION: VAPORS & MISTS WILL IRRITATE NOSE &
THROAT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:BURNS, IRRITATION, CHEST DISCOMFORT.
Medical Cond Aggravated by Exposure:SKIN SENSITIZATION.

First Aid

First Aid:EYES: FLUSH W/LOTS OF RUNNING WATER FOR 15 MINS. SKIN: WASH
THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
INGESTION: DRINK PLENTY OF WATER. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Fire Fighting

Extinguishing Media:DRY CHEMICAL, HALON, WATER SPRAY, FOAM/FOG
Fire Fighting Procedures:WEAR SCBA & FULL PROTECTIVE CLOTHING, SUCH AS
TURN OUT GEAR. CARTRIDGE RESPIRATORS DON'T PROVIDE ADEQUATE
PROTECTION FOR FIRE FIGHTERS/EXOTHERM MITIGATION.
Unusual Fire/Explosion Hazard:MAY LIBERATE LARGE QUANTITIES OF DENSE
FOUL-SMELLING SMOKE WHICH MAY CONTAIN UNIDENTIFIED TOXIC GASSES.

Accidental Release

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES & SAFETY
GLASSES. ABSORB W/ABSORBENT MATERIAL SUCH AS VERMICULITE/SAND.
SCRAPE UP/SHOVEL INTO DOT-APPROVED WASTE CONTAINERS.

Handling

Handling and Storage Precautions:PRODUCT MAY BE STORED AT ROOM TEMP FOR
UP TO 12 MONTHS. KEEP CONTAINER TIGHTLY CLOSED WHEN NOT IN USE.
Other Precautions:DON'T CUT, GRIND, WELD/DRILL ON/NEAR THIS CONTAINER.
EMPTY CONTAINERS RETAIN PRODUCT RESIDUE, HANDLE EMPTY CONTAINERS AS
IF THEY WERE FULL. AVOID MIXING CURING AGENT IN BATCHES GREATER
THAN 1 POUND. D ON'T HEAT MIXED ADHESIVE >125F.

Exposure Controls

Respiratory Protection:A RESPIRATOR EQUIPPED W/ORGANIC VAPOR CARTRIDGE
MAY BE APPROPRIATE.
Ventilation:LOCAL EXHAUST
Protective Gloves:BUTYL RUBBER/POLYVINYL ALCOHOL/NITRILE
Other Protective Equipment:SAFETY GLASSES W/SIDE SHIELDS/CHEMICAL
GOGGLES. EYEWASH & SAFETY SHOWER. LONG-SLEEVED SHIRT & TROUSERS.
Work Hygienic Practices:WASH AFTER HANDLING.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:405F
Vapor Pres:0
Vapor Density:>1
Spec Gravity:0.96
Solubility in Water:100%
Appearance and Odor:AMBER LIQUID W/AMONIACAL ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS/MINERAL ACIDS.
Stability Condition to Avoid:HEAT, TEMP >125F.
Hazardous Decomposition Products:CO, NITROGEN OXIDES, ALDEHYDES, ACIDS
& UNDETERMINED ORGANICS.

Disposal

Waste Disposal Methods:INCINERATION IN AN EPA APPROVED WASTE
INCINERATOR IS PREFERRED IAW/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.