BXRPF - 6000 SERIES, HIGH SOLID EPOXY-POLYAMIDE (SUP DAT)
- MSDS: BXRPF
- Manufacturer: PRO LINE PAINT COMPANY
- Product Name: 6000 SERIES, HIGH SOLID EPOXY-POLYAMIDE (SUP DAT)
- National Stock Number: 8010-00N060118
Product Identification
Product ID:6000 SERIES, HIGH SOLID EPOXY-POLYAMIDE (SUP DAT)
MSDS Date:10/26/1994
FSC:8010
NIIN:00N060118
MSDS Number: BXRPF
Responsible Party
SAN DIEGO, CA 92113-3697
US
Emergency Phone: 619-728-3192
Info Phone: 619-231-2313
Preparer: E SOETERIK
Cage: 9D157
Contractor
Telephone: 619-231-2313; 619-232-8968
Cage: 9D157
Ingredients
COMPONENT A CONTAINING INGREDIENTS 2-7
RTECS: 9999999ZZ
1,2-ETHANEDIAMINE,
CAS: 112-57-2
RTECS: KH8585000
Fraction By Weight: 3%
OSHA PEL N/K
ACGIH TLV: N/K
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM
CAS: 14807-96-6
RTECS: MW2710000
Fraction By Weight: 39%
OSHA PEL 0.2 FIBERS/CC
ACGIH TLV: 0.2 FIBER/CC,A1
HARDENER; (HARDENER RESIN HY283)
Fraction By Weight: 25%
OSHA PEL N/K
ACGIH TLV: N/K
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 12%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
BUTYL ALCOHOL; (N-BUTYL ALCOHOL) (SARA 313) (CERCLA)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 20%
OSHA PEL 100 PPM
ACGIH TLV: C 50 PPM, S
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
C. I. PIGMENT GREEN 7; (ADDITIVE PHTHALO GREEN)
CAS: 1328-53-6
RTECS: GE4300000
Fraction By Weight: 1%
OSHA PEL N/K
ACGIH TLV: N/K
COMPONENT B CONTAINING INGREDIENTS 9-16
RTECS: 9999999ZZ
BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (BIS-PHENOL
CAS: 25068-38-6
RTECS: SL6475000
Fraction By Weight: 44%
OSHA PEL N/K
ACGIH TLV: N/K
SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (AMSCO HFN
CAS: 64742-95-6
RTECS: WF3400000
Fraction By Weight: 17%
OSHA PEL N/K
ACGIH TLV: N/K
XYLENE (SARA 313) (CERCLA)
CAS: 1330-20-7
RTECS: ZE2100000
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM/150STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
BENZENE, TRIMETHYL-(MIXED ISOMERS); (TRIMETHYL BENZENE)
CAS: 25551-13-7
RTECS: DC3220000
OSHA PEL 25 PPM
ACGIH TLV: 25 PPM
CUMENE (SARA 313) (CERCLA)
CAS: 98-82-8
RTECS: GR8575000
OSHA PEL 50 PPM, S
ACGIH TLV: 50 PPM, S
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM
CAS: 14807-96-6
RTECS: MW2710000
Fraction By Weight: 24%
OSHA PEL 0.2 FIBERS/CC
ACGIH TLV: 0.2 FIBER/CC,A1
GROG; (ANHYDROUS ALUMINUM SILICATE)
CAS: 66402-68-4
Fraction By Weight: 13%
OSHA PEL N/K
ACGIH TLV: 10MG/M3 (MFR)
ORGANOPHILIC CLAY
CAS: 71011-25-1
Fraction By Weight: 1%
OSHA PEL N/K
ACGIH TLV: N/K
263 GR/L
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NAUSEA, DIZZINESS, HEADACHE AND
CONVULSIONS. INHALATION: COUGHING, SHORTNESS OF BREATH, MAY CAUSE
DIZZINESS. EYES/SKIN: BURNING SENSATION, RASH BREAKOUT WITH SKIN
TURNING PINK AND REDNESS OF EY ES. ABSORBED THROUGH SKIN: SKIN RASH
MAY CAUSE BURNING OF SKIN AND INFLAMMATION. INGESTION: VOMITING
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: DUE TO UNPLEASANT TASTE. MAY CAUSE
DIARRHEA OR STOMACH CRAMPS. CHRONIC: NO INFORMATION AVAILABLE.
REPORTS HAVE SHOWN THAT ASSOCIATED REPEATED AND PROLONGED
OCCUPATIONAL OVEREXPOSURE TO SOLVE NTS CAN CAUSE PERMANENT BRAIN
AND NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:ASTHMA, EMPHYSEMA AND OTHER
RESPIRATORY DISEASES.
First Aid
First Aid:EYES: FLUSH IMMED W/FRESH WATER BY EYEWASH APPARATUS/BY HAND
FOR AT LEAST 15 MIN. SEEK MED ATTN. SKIN: WASH IMMED W/WATER, THEN
WASH W/SOAP & WATER, RINSE IMMED. IF BURNING SENSATION, RASH BREAK
OUT/O THER SYMP OCCUR SEEK MED ATTN. INHAL: MOVE TO FRESH AIR. ARTF
RESP IF NEC. SEEK MED ATTN. INGEST: SEEK MED ATTN. NOTE TO MD:
CONSULT W/POIS CTL CTR & FOR WORKERS WHO ARE EXPOSED REGULARLY,
(SUP DAT)
Fire Fighting
Flash Point Method:SCC
Flash Point:100F,38C
Lower Limits:0.5%
Upper Limits:11.2%
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. BLANKET FLAME W/ONE OF THE ABOVE. DO NOT ENTER FIRE AREA W/OUT
PROPER PROT & EQUIP.
Unusual Fire/Explosion Hazard:KEEP MATERIAL AWAY FROM HEAT, SPARKS, AND
OPEN FLAMES. EXPLOSIVE WHEN HEATED. STAY A SAFE DISTANCE FROM FIRE
WHEN EXTINGUISHING.
Accidental Release
Spill Release Procedures:REMOVE ALL KIND OF IGNIT SOURCES. PROVIDE
SUFFICIENT VENT. PROTECT CLEANUP MAN W/8540 3M CORP NIOSH APPRVD
RESP, GOGGLES & RUBBER GLOVES. USE ANY KIND OF ABSORBENT TO ABSORB
SPILLED MATERIAL & PUT IN METAL CONTAINER MARKED "DO NOT USE
THISMATERIAL".
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP IN DRY AREA AT ROOM TEMPERATURE,
77F PLUS OR MINUS 5 DEGREES. PREVENT CANS FROM CORROSION AND
CONSEQUENTLY, SPILLAGE.
Other Precautions:WASH CONTAM EQUIP W/REC SOLVS. POST NO SMKNG SIGNS.
INTENTIONAL MISUSE BY DELIBERATELY CONC & INHALING CONTENTS MAY BE
HARMFUL/FATAL. HOW TO DETECT THIS SUBSTANCE: (WARNING PROPERTIES OF
SUBSTANCE AS A GAS VAP, DUST/MIST). (SUP DAT)
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPRVD DUST/MIST RESP (HIGH
EFFICIENCY CARTRIDGES ADVISED) IF SPRAYING/SANDING. USE NIOSH/MSHA
APPRVD ORG VAP CARTRIDGE IF TLV FOR SOLV COMPONENTS MAY BE EXCEEDED
(E.G., 8540 3M CORP RE SP). WHEN USING IN CONFINED (SUP DAT)
Ventilation:USE LOCAL EXHAUST WHEN APPLYING THIS PAINT IN CONFINED
AREAS. KEEP VAPORS BELOW TLV.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORK GOG W/SIDESHIELD.
Other Protective Equipment:USE PROT CLTHG & CHANGE CONTAM CLTHG IMMED.
PROVIDE EMER SHOWERS & EYEWASH AT STATIONARY PAINT APPLICATN (SUP
DAT)
Work Hygienic Practices:TRAIN EMPLOYEES ON ALL SPECIAL HANDLING
PROCEDURES IN THIS SECTION BEFORE THEY WORK WITH THIS PRODUCT.
Supplemental Safety and Health
TRADE NAME/PART #: PRIMER PAINT, WHITE & COLORS-COMPONENT PAINT (A&B)
MIXED. FIRST AID PROC: PROVIDE DETAILED PERIODIC EXAMINATION. RESP
PROT: AREA, WEAR AIR-FED HOOD. OTHER PREC: VAPOR ODOR TYPICAL O F
BUTANOL IS NOT AN ADEQUATE WARNING OFINTOXICATION. OTHER PROT
EQUIP: FACILITIES MEETING ANSI DESIGN CRITERIA .
Chemical Properties
Boiling Pt:B.P. Text:244F,118C
Melt/Freeze Pt:M.P/F.P Text:128F,53C
Vapor Pres:4.4 @ 20C
Vapor Density:2.1
Spec Gravity:1.3
Evaporation Rate & Reference:0.43 (BUTYL ACETATE=1)
Solubility in Water:POOR
Appearance and Odor:TYPICAL PAINT APPEARANCE WITH STRONG ALCOHOL ODOR
Stability
Stability Indicator/Materials to Avoid:YES
WHEN "A" & "B" ARE MIXED, KEEP AWAY FROM HEAT. HEAT WILL CREATE A RAPID
CHEMICAL REACTION. EMITS HEAT.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAMES. DO NOT ALLOW
VAPOR TO ACCUMULATE.
Hazardous Decomposition Products:FLAMMABLE FUMES MAY ACCUMULATE IN
CONFINED AREAS AND SPARKS OR OPEN FLAMES MAY IGNITE IT.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.