BXTLX - 369201 "1" SHOT ACRYLIC GRAPHIC COAT BULLETIN COLORS (WHITE)
- MSDS: BXTLX
- Manufacturer: CONSUMERS PAINT FACTORY INC
- Product Name: 369201 "1" SHOT ACRYLIC GRAPHIC COAT BULLETIN COLORS (WHITE)
- National Stock Number: 8010-00D003687
Product Identification
Product ID:369201 "1" SHOT ACRYLIC GRAPHIC COAT BULLETIN COLORS (WHITE)
MSDS Date:04/01/1992
FSC:8010
NIIN:00D003687
MSDS Number: BXTLX
Responsible Party
GARY, IN 46406-1563
US
Emergency Phone: 219-949-1684/800-424-9300(CHEMTREC)
Info Phone: 219-949-1684/POISON 800-854-6813
Cage: 13294
Contractor
Telephone: 219-949-1684/800-424-9300(CHEMTREC)
Cage: 13294
Ingredients
PROPYLENE GLYCOL
CAS: 57-55-6
RTECS: TY2000000
Fraction By Weight: 0-4%
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CONTACT MAY CAUSE EYE
IRRITATION. CONTACT MAY CAUSE ALLERGIC SKIN REACTION OR RESPIRATORY
REACTION IN PEOPLE WHO ARE SENSITIVE (ALLERGIC) TO ACRYLIC
POLYMERS. CHRONIC: NONE SPECIFIED BY MANUFAC TURER.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:EYES-REDNESS, TEARING, DISCOMFORT.
SKIN-REDNESS, ITCHING, DISCOMFORT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
DLA-HMIS: PRE-EXISTING SKIN CONDITIONS OR DERMATITIS MAY BE
AGGRAVATED BY EXPOSURE.
First Aid
First Aid:INHALED-REMOVE TO FRESH AIR. RESTORE BRETAHING IF NOT
BREATHING. GET MEDICAL HELP. EYES-FLUSH WITH LOTS OF WATER FOR 15
MINUTES. GET MEDICAL HELP IMMEDIATELY. SKIN-REMOVE EXCESS WITH
PAPER TOWELS OR R AGS. WASH WITH SOAP & WATER. GET MEDICAL
ATTENTION IF REDNESS OR SWELLING PERSISTS. INGESTED-DO NOT INDUCE
VOMITING! GET IMMEDIATE MEDICAL ATTENTION.
Fire Fighting
Lower Limits:0.7-1.0
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE GEAR. COOL FIRE EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. ISOLATE FORM HEAT & SPARKS. BOND & GROUND
EQUIPMENT DURING TRANSFER OPERATIONS.
Accidental Release
Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS, WEAR NIOSH OR MSHA APPROVED RESPIRATOR AND
VENTILATE AREA. REMOVE WITH INERT ABSORBENT SUCH AS SAND, KITTY
LITTER, ETC. AND USE NON-SPARKING TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:SECURE CONTAINERS AND KEEP CONTAINERS
UPRIGHT. STORE BELOW 120F. STORE IN A COOL, DRY PLACE THAT COMPLIES
WITH OSHA 1910.106.
Other Precautions:DO NOT TAKE INTERNALLY. DO NOT GET IN EYES OR ON SKIN
OR CLOTHES. AVOID BREATHING VAPORS OR MISTS. DO NOT STORE OR USE
NEAR HEAT. AVOID FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES.
Exposure Controls
Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR AN EMERGENCY OCCURS; WEAR AN MSHA/NIOSH APPROVED RESPIRATOR OR
AN AIR-SUPPLIED RESPIRATOR OR SCBA, AS REQUIRED. USE IN ACCORDANCE
WITH 29 CFR 1910.13 4 AND MANUFACTURER'S RECOMMENDATIONS.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION OR LOCAL EXHAUST TO
MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:RUBBER OR NEOPRENE.
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS.
Other Protective Equipment:AS NEEDED-USE BODY PROTECTION SUCH AS RUBBER
APRON, ETC. DLA-HMIS: EYE WASH.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
DO NOT FLAME-CUT, BRAZE, OR WELD WITHOUT NIOSH/MSHA APPROVED MECHANICAL
FILTER RESPIRATOR OR APPROPRIATE AND ADEQUATE VENTILATION. IF
WORKERS ARE EXPOSED TO SPRAY APPLICATION OR ABRASIVE BLAST CLEANIN
G, ENGINEERING & ADMINISTRATIVE CONTROLS MUST BE USED TO MAINTAIN
EXPOSURE BELOW PEL/TLV.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER=1)
Solubility in Water:APPRECIABLE
Appearance and Odor:LIQUID.
Percent Volatiles by Volume:64-67
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED TO DECOMPOSITION. FUMES MAY PRODUCE CARBON MONOXIDE AND
CARBON DIOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSE OF IN A SAFE MANNER IN ACCORDANCE WITH
LOCAL, STATE, AND FEDERAL REGULATIONS THAT APPLY TO INCINERATION OR
SECURE LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.