BXVLZ - WHT LEAD BASIC CARB PSTE OIL, TPO-143
- MSDS: BXVLZ
- Manufacturer: KALCOR COATING CO
- Product Name: WHT LEAD BASIC CARB PSTE OIL, TPO-143
- National Stock Number: 8010-00N060633
Product Identification
Product ID:WHT LEAD BASIC CARB PSTE OIL, TPO-143
MSDS Date:05/24/1994
FSC:8010
NIIN:00N060633
MSDS Number: BXVLZ
Responsible Party
WILLOUGHBY, OH 44094
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 216-946-4700
Preparer: D T
Cage: 33201
Contractor
Telephone: 216-946-4700
Cage: 33201
Ingredients
LEAD (II) CARBONATE, BASIC; (BASIC CARBONATE WHITE LEAD)
CAS: 1319-46-6
Fraction By Weight: 90%
OSHA PEL 0.05 MG/M3 (MFR)
ACGIH TLV: 0.15 MG/M3 (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: CAN CAUSE SEVERE
IRRITATION, REDNESS, TEARING/BLURRED VISION. SKIN: MAY CAUSE
IRRITATION. INHALATION: MAY BE IRRITATING TO NOSE,
THROAT/RESPIRATORY TRACT. INGESTION: CAN CAUSE GASTROINTES TINAL
IRRITATION, NAUSEA, VOMITING/DIARRHEA. CHRONIC: OVEREXPOSURE TO
LEAD COMPOUNDS MAY CAUSE ANEMIA, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: KIDNEY DAMAGE & CHRONIC EFFECTS
INVOLVING BLOOD, GASTROINTESTINAL, NERVOUS/REPRODUCTIVE SYSTEMS.
LEAD APPEARS ON THE NAVY LISTING OF OCCUPATIONAL CHEMICAL
REPRODUCTIVE HAZARDS. SEEK CONSULTA TION FROM APPROPRIATE HEALTH
PROFESSIONALS CONCERNING LATEST HAZARD LIST INFO & SAFE HANDLING &
EXPOSURE INFO .
Medical Cond Aggravated by Exposure:PREEXISTING EYE, SKIN AND
RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS
PRODUCT.
First Aid
First Aid:EYES: FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF RUNNING
WATER FOR AT LEAST 15 MINUTES. TAKE TO MD FOR DEFINITIVE MEDICAL
TREATMENT. SKIN: REMOVE FROM SKIN USING SOAP & WATER. REMOVE &
LAUNDER CONTA MINATED CLOTHING. INHALATION: REMOVE FROM EXPOSURE.
RESTORE BREATHING. KEEP WARM & QUIET. NOTIFY MD. INGESTION: IF
SWALLOWED, INDUCE VOMITING. REFER TO MD FOR DEFINITIVE MEDICAL
TREATMENT.
Fire Fighting
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLSD CONTRS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. SPONT COMBUST CAN OCCUR. RAGS & WASTE PAPER
CONTAINING THIS MATL MAY HEAT & BURN SPONT. STORE (SUP DAT)
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFACES, AND ELECTRICAL, STATIC OR FRICTIONAL SPARKS). AVOID
BREATHING VAPORS. DIKE AREA TO PREVENT MATERIAL FROM ENTERING
DRAINS OR SEWERS. REMOVE WITH IN ERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM OPEN FLAME. WARNINGS
APPLY TO EMPTY CONTAINERS. DO NOT STORE ABOVE 120F. KEEP CONTAINERS
TIGHTLY CLOSED.
Other Precautions:STORE LARGE QUANTITIES IN BUILDINGS DESIGNED TO
COMPLY WITH OSHA 1910.106. AVOID PROLONGED OR REPEATED CONTACT WITH
SKIN.
Exposure Controls
Respiratory Protection:IN OPEN AREAS USE NIOSH/MSHA APPRVD MECH RESP TO
REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING SPRAY
APPLICATN. IN RESTRICTED VENT AREAS USE NIOSH/MSHA APPRVD CHEM &
MECH FILTERS DESIGNED TO REM OVE COMBINATION OF PARTICULATE (SUP
DAT)
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP TLV & LEL OF MOST HAZ INGREDIENTS BELOW LIMITS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMER EYEWASH & DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA .
Work Hygienic Practices:LAUNDER CONTAM CLTHG BEFORE REUSE. WASH HANDS
BEFORE SMKNG/EATING. OBSERVE ACCEPTED GOOD HYGIENE PRACTICES. (SUP
DAT)
Supplemental Safety and Health
EXPLO HAZ: WIPING RAGS CONTAINING THIS MATL IN METAL CAN W/TIGHT LID.
RESP PROT: & VAP. IN CONFINED AREAS USE NIOSH/MSHA APPRVD AIR LINE
TYPE RESP/HOOD. HYGIENE PRACT: DO NOT USE THIS MATERIAL WHILE W
EARING CONTACT LENSES.
Chemical Properties
Vapor Density:HVR/AIR
Spec Gravity:4.0027
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Solubility in Water:SLIGHTLY
Appearance and Odor:PASTE
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ALUMINUM, SODIUM, TITANIUM, ZINC AND HYDROGEN
PEROXIDE.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:HEAT MAY CAUSE PRODUCT TO DECOMPOSE.
TOXIC FUMES SUCH AS CO, CO*2, PB COMPOUNDS OR VARIOUS HYDROCARBONS
MAY BE PRODUCED.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS. BEFORE
ATTEMPTING CLEAN UP, REFER TO HAZARD CAUTION INFORMATION IN OTHER
SECTIONS OF THIS MSDS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.