Product ID:LITE WEIGHT 3-LIGHTWEIGHT BODYFILLER, 1035
MSDS Date:03/13/1995
FSC:8010
NIIN:00N061122
MSDS Number: BXXTF

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 800-729-7600

Cage: 18731

Telephone: 513-489-7600

Cage: 18731

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: CONT W/LIQ/VAP MAY RSLT
IN IRRIT, REDNESS, TEARING, & BLURRED VISION. SKIN: CONT W/WET MATL
MAY RSLT IN IRRIT & POSS DERM. INHAL: EXCESS INHAL OF VAPS MAY
CAUSE NASAL & RESP IRRIT, ACUTE CNS DEPRESS, FATG, WEAK, NAUS,
HDCH, & DIZZ. INGEST: MAY CAUSE GI IRRIT, NAUS, DIARR, & VOMIT.
ASPIR (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE: IARC MONOGRAPHS, SUPPLEMENT,
VOL 7, PG 345, 1987: GROUP 2B ANIMAL: NERVOUS SYSTEM.
Effects of Overexposure:HLTH HAZ: OF MATL INTO LUNGS DUE TO VOMIT MAY
PRODUCE CHEM PNEUMIT WHICH CAN BE FATAL. CHRONIC: EXCESS OVEREXP TO
STYRENE HAS BEEN FOUND TO CAUSE THE FOLLOWING EFTS IN LAB ANIMALS:
LIVER ABNORM, KIDNE Y DMG & LUNG DMG.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH IMMED W/LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. SEE MD FOR MEDICAL TREATMENT. SKIN: IMMED WASH AFFECTED
AREA W/SOAP & WATER. REMOVE CONTAM CLOTHING. CONSULT MD IF
IRRITATION DEVELO PS. INHAL: REMOVE TO FRESH AIR. RESTOREBREATHING.
KEEP PERSON WARM & QUIET. TREAT SYMPTOMATICALLY. GET MEDICAL
ATTENTION. INGEST: KEEP PERSON WARM & QUIET. CONSULT MD/POISON
CONTROL CENTER IMMED.

Flash Point:88.0F,31.1C
Lower Limits:1.1%
Extinguishing Media:FOAM, CARBON DIOXIDE, AND DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER MAY BE USED TO COOL CONTAINERS TO
PREVENT PRESSURE BUILD-UP WHICH MAY RUPTURE CONTRS.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR AND MAY
TRAVEL ALONG THE FLOOR AND BE IGNITED BY SPARKS OR FLAMES AT A
DISTANCE FROM WHERE THE MATERIAL IS BEING USED.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
AREA. WEAR PROTECTIVE EQUIPMENT. AVOID BREATHING VAPORS. CONTAIN
SPILL. COLLECT WITH INERT ABSORBENT AND REMOVE. DISPOSE OF
PROPERLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE MATL IN COOL, WELL-VENT AREA. DO
NOT STORE AT TEMPS >75F. DO NOT USE/STORE NEAR HEAT, SPARKS/OPEN
FLAME. KEEP CONTR TIGHTLY CLSD.
Other Precautions:AVOID CONT W/INCOMPATIBLE MATLS. THIS PROD MUST BE
MIXED W/CATALYST PRIOR TO USE. PLEASE REFER TO MSDS FOR CATALYST
BEFORE USING. IF PROD IS TO BE SANDED, PEL/TLV OF 10MG/M3 FOR
NUISANCE DUSTS SHOULD BE OBSERVED. KEEP OUT OF THE (SUP DAT)

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS DESIGNED TO
REMOVE PARTICULATE MATTER AND ORGANIC SOLVENT VAPORS.
Ventilation:GEN DILUTION/LOC EXHAUST VENT SHOULD BE PROVIDED TO KEEP
EXPOS BELOW ACCEPTABLE LIM & TO KEEP SOLV VAPS BELOW LEL.
Protective Gloves:NEOPRENE OR NATURAL RUBBER.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMER EYEWASH & DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA . PROPER CLTHG TO PREVENT SKIN CONT. BARRIER (SUP
DAT)
Work Hygienic Practices:ALWAYS WASH HANDS AFTER USING THIS MATERIAL,
AND BEFORE EATING, DRINKING, OR SMOKING.
Supplemental Safety and Health
OTHER PREC: REACH OF CHILDREN. DO NOT TAKE INTERNALLY. AVOID CONT
W/EYES & SKIN. OTHER PROT EQUIP: CREAM MAY BE WORN FOR ADDNL SKIN
PROT. IMPERMEABLE CLTHG SHOULD BE WORN TO PREVENT PRLNG/RPTD CONT
OF WET MATL W/SKIN.

Boiling Pt:B.P. Text:293F,145C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:1.19
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
PEROXIDES, STRONG OXIDIZERS, STRONG MINERAL ACIDS, AND POLYMERIZATION
CATALYSTS.
Stability Condition to Avoid:HIGH TEMPERATURES, IGNITION SOURCES, AND
CONTACT WITH INCOMPATIBLE MATERIALS.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISP OF I/A/W FED, STATE, & LOC REGS. WASTE FROM
PROD MAY BE HAZ AS DEFINED UNDER RCRA 40 CFR 261. WASTE MUST BE
TESTED FOR IGNIT TO DETERMINE APPLIC EPA HAZ WASTE NUMBERS. BEFORE
ATTEMPTING CLEANUP/D ISP OF MATL, REFER TO HAZ INFO IN
OTHERSECTIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.