BXYCY - PHILLYBOND #6 HARDNER

  • MSDS: BXYCY
  • Manufacturer: N P
  • Product Name: PHILLYBOND #6 HARDNER
  • National Stock Number: 4730-00-542-3362
Product Identification

Contractor
ITW PHILADELPHIA RESINS
MONTGOMERYVILLE, PA 18936 US

Telephone: 215-855-8450

Cage: 20420

Ingredients

FORMALDEHYDE POLYMER W/4-(1,1-DIMETHYL) PHENOL AND TETA

CAS: 32610-77-8

Fraction By Weight: 30-40%


TRIETHYLENE TETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: <5%


PHENOLS

CAS: 108-95-2

Fraction By Weight: <7%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:ORAL LD50 (RAT) IS 414 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES-MOERATE EYE IRRITATION.
SKIN-MODERATE SKIN IRRITANT. INHALATION-PROLONGED INHALATION OF
HEATED VAPORS MAY CAUSE IRRITATION OF THE NOSE, THROAT AND
RESPIRATORY TRACT. INGESTION-LIQUID MAY CAUSE SE VERE DAMAGE TO
MUCOUS MEMBRANES IF SWALLOWED.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:REPEATED EXCESSIVE OVEREXPOSURE TO PHENOL HAVE
CAUSED LIVER AND KIDNEY EFFECTS IN LABORATORY ANIMALS. REPEATED
EXCISSIVE OVEREXPOSURE TO THIS PRODUCT MAY CAUSE SKIN
SENSITIZATION.
Medical Cond Aggravated by Exposure:ASTHMA. CHRONIC RESPIRATORY
DISEASE. EYE DISEASE. SKIN ALLERGIES.

First Aid

First Aid:EYE-FLUSH WITH PLENTY OF WATER FOR 15 MIN. GET PROMPT MEDICAL
ATTENTION. SKIN-WASH AREA WITH SOAP & WATER FOR 15 MIN. IF SYMPTOMS
PERSISTS, CONTACT A PHYSICIAN. INHALATION-REMOVE TO FRESH AIR AND
PROV IDE OXYGEN IF BREATHING IS DIFFICULT. GET MEDICAL ATTENTION IF
EFFECTS OCCUR. INGESTION-DO NOT INDUCE VOMITING. GIVE WATER OR MILK
IF AVAILBLE. SEEK MEDICAL ATTENTION IMMEDIATELY.

Fire Fighting

Flash Point:200F,93C; PMCC

Accidental Release

Spill Release Procedures:AVOID PERSONAL CONTACT. ABSORB ON INERT
MATERIAL SUCH AS SAND, EARTH OR VERMICULITE AND PLACE INTO A
SUITABLE, LABELED CONTAINER FOR WASTE DISPOSAL. RESIDUE MAY BE
CLEANED WITH A SAFETY SOLVENT. WEAR ADEQUATE PROTECTIVE CLOTHING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL DRY PLACE WITH
ADEQUATE VENTILATION. KEEP AWAY FROM OPEN FLAMES AND HIGH
TEMPERATURES. KEEP AWAY FROM HEAT.
Other Precautions:AVOID PROLONGED OR REPEATED INHALATION OF HEATED
VAPORS OR SPRAY MISTS. AVOID PROLONGED OR REPEATED SKIN CONTACT.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESPIRATORY PROTECTION REQUIRED
IN THE ABSENCE OF PROPER ENVIRONMENTAL CONTROL. FOR EMERGENCIES, A
SELF-CONTAINED BREATHING APPARATUS, OR FULL FACE RESPIRATOR IS
RECOMMENDED.
Ventilation:WHEN WORKING IN CONFINED AREAS, NIOSH APPROVED RESPIRATORS
ARE REQUIRED.
Protective Gloves:CHEMICAL RESISTANT RUBBER & LON SLEEVES.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:LONG SLEEVE CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
***ITEM IS A TWO PART KIT.***

Stability

Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, AND
OXIDES OF NITROGEN.

Disposal

Product ID:PHILLYBOND #6 HARDNER
MSDS Date:01/01/1987
FSC:4730
NIIN:00-542-3362
Kit Part:Y
MSDS Number: BXYCY

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.