BXYCZ - PHILLYBOND #6 RESIN
- MSDS: BXYCZ
- Manufacturer: N P
- Product Name: PHILLYBOND #6 RESIN
- National Stock Number: 4730-00-542-3362
Product Identification
Contractor
Telephone: 215-855-8450
Cage: 20420
Ingredients
BISPHENOL A-EPICHLOROHYDRIN COPOLYMER
CAS: 25068-38-6
RTECS: SL6475000
Fraction By Weight: 30-60%
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT) IS 11,400 MG/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES-MOERATE IRRITATION. SKIN-MODERATE
IRRITANT. INHALATION-BECAUSE OF ITS LOW VOLATILITY, THIS PRODUCT IS
NOT LIKELY TO PRODUCE ANY ADVERSE EFFECTS BY INHALATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:PROLONGED OR REPEATED EXPOSURE MAY CAUSE SKIN
SENSITIZATION OTHER RESPONSES.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN AND EYE ALLERGIES
MAY INCREASE THE CHANCE OF DEVELOPING INCREASED ALLERGY SYMPTOMS
FROM EXPOSURE.
First Aid
First Aid:EYE-FLUSH WITH WATER FOR 30 MIN. GET IMMEDIATE MEDICAL
ATTENTION. SKIN-WASH AREA WITH SOAP & WATER FOR 15 MIN. IF SYMPTOMS
PERSISTS, CONTACT A PHYSICIAN. INHALATION-REMOVE TO FRESH AIR AND
PROVIDE OXY GEN IF BREATHING IS DIFFICULT. GET MEDICAL ATTENTION IF
EFFECTS OCCUR. INGESTION-DO NOT INDUCE VOMITING. GIVE WATER OR MILK
IF AVAILBLE. SEEK MEDICAL ATTENTION IMMEDIATELY.
Fire Fighting
Flash Point:450F,232C; TOC
Accidental Release
Spill Release Procedures:AVOID PERSONAL CONTACT. SCRAPE UP AS MUCH
MATERIAL AS POSSIBLE AND PLACE IN A SUITABLE, LABELED CONTAINER FOR
WASTE DISPOSAL. RESIDUE MAY BE REMOVED USING A SAFETY SOLVENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL DRY PLACE WITH
ADEQUATE VENTILATION. KEEP AWAY FROM OPEN FLAMES AND HIGH
TEMPERATURES. KEEP AWAY FROM HEAT.
Other Precautions:AVOID PROLONGED OR REPEATED INHALATION OF HEATED
VAPORS OR SPRAY MISTS. AVOID PROLONGED OR REPEATED SKIN CONTACT.
Exposure Controls
Respiratory Protection:NOT ORDINARILY REQUIRED FOR RESIN. RESPIRATORY
PROTECTION SHOULD BE SUITABLE FOR ALL WORKING CONDITIONS. DUST
MASKS SHOULD BE WORN DURING ANY GRINDING OR MACHINING PRODCEDURES.
Ventilation:GOOD GENERAL VENTILATION IS USUALLY ADEQUATE FOR MOST
INDUSTRIAL APPLICATIONS.
Protective Gloves:CHEMICAL RESISTANT RUBBER & LONG SLEEVES
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:LONG SLEEVE CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
***ITEM IS A TWO PART KIT.***
Stability
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, AND
OXIDES OF NITROGEN.
Disposal
Product ID:PHILLYBOND #6 RESIN
MSDS Date:01/01/1987
FSC:4730
NIIN:00-542-3362
Kit Part:Y
MSDS Number: BXYCZ
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.