BXZGL - BRONZE PUTTY (BR)-RESIN, PART A.
- MSDS: BXZGL
- Manufacturer: DEVCON CORP
- Product Name: BRONZE PUTTY (BR)-RESIN, PART A.
- National Stock Number: 8030-00-333-4534
Product Identification
Product ID:BRONZE PUTTY (BR)-RESIN, PART A.
MSDS Date:07/01/1986
FSC:8030
NIIN:00-333-4534
Kit Part:Y
MSDS Number: BXZGL
Responsible Party
DANVERS, MA 01923-3753
US
Emergency Phone: 617-777-1100
Info Phone: 617-777-1100
Preparer: NONE
Cage: 16059
Contractor
Telephone: 1-508-777-1100
Cage: 16059
Ingredients
BISPHENOL A-DIGLYCIDYL ETHER RESIN
CAS: 25068-38-6
RTECS: SL6475000
Fraction By Weight: 10-30%
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT) IS 11.4 G/KG.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: MILD IRRITATION. SKIN:
MILD IRRITATION. INHALATION: NO DATA. INGESTION: NO DATA. CHRONIC:
MODERATE SKIN SENSITIZER.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: IRRITATION. INHALATION:
NO DATA. INGESTION: NO DATA.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING ALLERGY,
ECZEMA, SKIN CONDITION ARE AT INCREASED RISK FROM EXPOSURE TO THIS
PRODUCT.
First Aid
First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. GET MEDICAL
ATTENTION. SKIN: WASH AREA WITH SOAP AND WARM WATER. GET MEDICAL
ATTENTION IF IRRITATION DEVELOPS. INHALATION: MOVE TO FRESH AIR.
ADMINISTER OXYGEN IF BREATHING IS DIFFICULT. GET MEDICALATTENTION.
INGESTION: DO NOT INDUCE VOMITING. ADMINISTER TWO GLASSES OF WATER.
GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:PMCC
Flash Point:>400F,>204C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICALS. POLYMER FOAMS FOR
LARGE FIRES.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS AND PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:PREVENT SKIN AND EYE CONTACT. SCRAPE UP AND
DISCARD IN SUITABLE CONTAINERS. USE ABSORBENT MATERIAL IF
NECESSARY. WASH SPILL AREA WITH INDUSTRIAL CLEANING AGENT. IF
SOLVENT IS USED FOR CLEANING, TAKE P RECAUTIONS AGAINST FIRE AND
PERSONAL OVEREXPOSURE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE. HANDLE IN
ACCORDANCE WITH POTENTIAL HAZARD OF THE CURING AGENT USED. REMOVE
CONTAMINATED CLOTHING AND PROTECTIVE GEAR.
Other Precautions:IF CURED MATERIAL IS SANDED/MACHINED, USE PROPER
PRECAUTIONS.WEAR ADEQUATE PROTECTIVE EQUIPMENT TO PREVENT
OVEREXPOSURE TO NUISANCE PARTICULATES. SMALL AMOUNTS OF COPPER DUST
MAY BE GENERATED.COPPER P OWDER HAS BEEN ISSUED TLV-TWA OF 1MG/M3.
Exposure Controls
Respiratory Protection:NONE REQUIRED AT NORMAL HANDLING TEMPERATURES.
Ventilation:LOCAL EXHAUST IS RECOMMENDED FOR CONFINED AREAS. GENERAL
VENTILATION IS ADEQUATE FOR NORMAL USE.
Protective Gloves:CHEMICAL RESISTANT RUBBER GLOVES.
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS.
Other Protective Equipment:WEAR PROTECTIVE CLOTHING AS REQUIRED TO
PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
KEY1:N1. THIS ENTRY DESCRIBES PART A OF A TWO PART KIT. SEE THIS SAME
NSN, P/N IND D, FOR PART B DATA. DESTROY LEATHER ARTICLES,
INCLUDING SHOES THAT CANNOT BE DECONTAMINATED.
Chemical Properties
HCC:C2
Vapor Pres:NIL
Vapor Density:>1
Spec Gravity:2.6
pH:7.0
Solubility in Water:NIL
Appearance and Odor:BRONZE PASTE. LOW ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:OPEN FLAME AND EXCESSIVE HEAT.
Hazardous Decomposition Products:OXIDES OF CARBON, ALDEHYDES AND ACIDS
FROM INCOMPLETE CONBUSTION.
Conditions to Avoid Polymerization:WILL NOT OCCUR. HEAT IS GENERATED
WHEN MIXED WITH EPOXY HARDENER. USE CAUTION WHEN MIXING LARGE
QUANTITIES.
Disposal
Waste Disposal Methods:REMOVE TO WASTE DISPOSAL FACILITY OPERATING IN
COMPLIANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.