BXZHX - AMERCOAT 275E

Product Identification

Product ID:AMERCOAT 275E
MSDS Date:07/28/1994
FSC:8010
NIIN:01-380-0387
MSDS Number: BXZHX

Responsible Party
AMERON PROTECTIVE COATINGS
201 N. BERRY ST.
BREA, CA 92622-1020
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 714-529-1951 (H. KLINE)

Cage: 0Y2E4

Contractor
AMERON PROTECTIVE COATINGS
1020 BREA, CA 92622-1020 US

Telephone: 714-529-1951

Cage: 0Y2E4

Ingredients

0.5 G/KG)

CAS: 1317-39-1

Fraction By Weight: <75%

OSHA PEL 0.1 MG/M3 AS CU FUME

ACGIH TLV: 0.2 MG/M3


14 G/KG,

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 9.18%

OSHA PEL 150PPM, 710 MG/M3*

ACGIH TLV: 20 PPM, 95 MG/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


N-BUTYL ALCOHOL (SARA 313) (CERCLA) (VP 4.3 MM @ 68F)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 2.73%

OSHA PEL 50 PPM (CEIL)

ACGIH TLV: 50 PPM (CEIL)

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


VINYL CHLORIDE RESIN

CAS: 9003-22-9

Fraction By Weight: <5%

OSHA PEL 1 PPM

ACGIH TLV: 5 PPM


CHLORINATED PARAFFIN

CAS: 63449-39-8

RTECS: RV0450000

Fraction By Weight: <5%

ACGIH TLV: 2 MG/M3 AS PARAFFIN*

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:UNKNOWN IARC:UNKNOWN OSHA:NO
Effects of Overexposure:VAPOR/SPRAY MIST CAN BE HARMFUL/IRRITATING TO
EYES/SKIN/NOSE/THROAT. EXCESSIVE INHALATION CAN CAUSE HEADACHE,
NAUSEA OR DIZZINESS. REPEATED/PROLONGED OCCUPATIONAL OVEREXPOSURE
TO SOLVENT IS ASSOCIATED W/ PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE.
CAN BE HARMFUL IF SWALLOWED. OVEREXPOSURE CAN DAMAGE
KIDNEYS/LIVER/BLOOD/*
Medical Cond Aggravated by Exposure:RESPIRATORY, SKIN.
*LUNGS/CENTRAL NERVOUS SYSTEM.

First Aid

First Aid:OVEREXPOSURE TO VAPOR/SPRAY MIST-PROVIDE FRESH AIR; IF
BREATHING LABORED, GIVE OXYGEN/ARTIFICIAL RESPIRATION. SKIN: WASH
THOROUGHLY W/ SOAP & WATER. EYES: FLUSH IMMEDIATELY WITH PLENTY
WATER AT LEAST 15 MINUTES. GET MEDICAL ATTN. IF SWALLOWED, DRINK
1-2 GLASSES WATER TO DILUTE. DO NOT INDUCE VOMITING. CONSULT
DR/POISON CENTER IMMEDIATELY. TREAT SYMPTOMATICALLY.

Fire Fighting

Flash Point Method:SCC
Flash Point:84.0F,28.9C
Lower Limits:1.4
Upper Limits:11.2
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR FULL PROTECTIVE EQUIP., SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. ISOLATE FROM HEAT. ELECTRICAL EQUIPMT.
SPARKS & OPEN FLAME. PREVENT STATIC DISCHARGE.*

Accidental Release

Spill Release Procedures:AVOID BREATHING VAPORS. USE ABSORBANT CLEAN UP
MATERIALS. PLACE IN SEPARATE CONTAINER. KEEP OUT OF
SEWERS&WATERWAYS. IF ENTRY IS THREATENED OR OCCURS, NOTIFY LOCAL
AUTHORITIES. ELIMINATE ALL SOURCES O F IGNITION.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED, UPRIGHT WHEN
NOT IN USE. STORE IN COOL, DRY, WELL-VENTILATED AREA. AVOID STORAGE
TEMPERATURES ABOVE 100F.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED BREATHING OF
VAPORS OR SPRAY MIST OR CONTACT W/ SKIN&EYES. DO NOT WELD OR FLAME
CUT AN EMPTY CONTAINER. GROUND CONTAINERS WHEN POURING.

Exposure Controls

Respiratory Protection:NIOSH/MSHA CERTIFIED RESPIRATOR. FOR SPECIFIC
CONDITIONS, REFER TO CURRENT NIOSH POCKET GUIDE TO CHEM. HAZARDS.
USE AIR-LINE RESPIRATORS IN CONFINED/RESTRICTED VENTED AREAS. REFER
TO 29 CFR, OSHA PART S 1910 & 1915, FOR COATING OPERATIONS.
Ventilation:SUFFICIENT VENT. IN VOLUME/PATTERN TO KEEP AIR CONTAMINANT
CONC. Protective Gloves:NEOPRENE/IMPERVIOUS FOR USE W/ SOLVENT.
Eye Protection:SPLASH-PROOF GOGGLES/FACE SHIELD.
Other Protective Equipment:FULL PROTECTIVE CLOTHING. SPARK-PROOF
EQUIPMENT.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, SMOKING, OR
USING WASH ROOM.LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:244F,118C
Vapor Density:>AIR
Evaporation Rate & Reference:(BUAC=1) LO=0.5, HI=1.0
Appearance and Odor:LIQUID, SOLVENT.
Percent Volatiles by Volume:37

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, ALKALIES.
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC OR SPARKS.
Hazardous Decomposition Products:CO AND CO2. HYDROGEN CHLORIDE FUMES.
Conditions to Avoid Polymerization:*AN INGREDIENT MAY CREATE FLOATING
FIRE HAZRD. VAPORS MAY SPREAD LONG DISTANCES. CAUSE FLASH FIRE OR
IGNITE EXPLOSIVELY.

Disposal

Waste Disposal Methods:IF SEPARATE, CLOSED METAL CONTAINER IN
ACCORDANCE WITH ALL APPLICABLE REGULATIONS. EPA WASTE #D002

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.