BYBHP - ARMOR, 10667
- MSDS: BYBHP
- Manufacturer: BALL INDUSTRIES INC
- Product Name: ARMOR, 10667
- National Stock Number: 7930-00N061775
Product Identification
Product ID:ARMOR, 10667
MSDS Date:01/02/1993
FSC:7930
NIIN:00N061775
MSDS Number: BYBHP
Responsible Party
COMPTON, CA 90220
US
Emergency Phone: 800-228-5635
Info Phone: 213-772-4131
Cage: 12120
Contractor
Telephone: 213-772-4131
Cage: 12120
Ingredients
WATER
CAS: 7732-18-5
RTECS: ZC0110000
OSHA PEL N/K
ACGIH TLV: N/K
ETHANOL, 2-(2-METHOXYETHOXY)-; (DIETHYLENE GLYCOL METHYL
CAS: 111-77-3
RTECS: KL6125000
OSHA PEL N/K
ACGIH TLV: N/K
DIPROPYLENE GLYCOL METHYL ETHER
CAS: 34590-94-8
RTECS: JM1575000
OSHA PEL 100 PPM, S
ACGIH TLV: 100 PPM;150 STEL, S
PHALLIC ACID, DIBUTYL ESTER; (DIBUTYL PHTHALATE) (SARA
CAS: 84-74-2
RTECS: TI0875000
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
ACRYLIC POLYMER
CAS: 25068-63-7
OSHA PEL N/K
ACGIH TLV: N/K
238 G/L.
RTECS: 9999999VO
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:REDNESS, TEARING.
INHAL:NAUSEA, HEADACHE, IRRITATED NASAL PASSAGES.
INGEST:GASTRO-INTESTINAL DISTURBANCES. SKIN:REDNESS, DRYNESS,
IRRITATION. CHRONIC:NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:EYES:FLUSH THORO W/WATER, REMOVE ANY CONT LENSES. CONTINUE TO
FLUSH W/WATER FOR AT LST 15 MINS. IF IRRIT OCCURS, GET MED ATTN.
INHAL:MOVE SUBJECT TO FRESH AIR. IF SYMPS PERSIST, GET MED ATTN.
INGEST:D RINK PLENTY OF WATER & CONT MD & POIS CTL CTR IMMED. NEVER
GIVE ANYTHING BY MOUTH TO UNCON PERS. NEVER INDUCE VOMIT IN UNCON
PERS. SKIN:WASH THORO W/SOAP & WATER. IF IRRIT PERSISTS, GET MED
ATTN.
Fire Fighting
Flash Point:NONE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER ABOVE BOILING POINT
(212F). POLYMER CAN BURN.
Accidental Release
Spill Release Procedures:MOP UP MATERIAL OR PICK UP W/ABSORBENT
MATERIAL. RINSE W/WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. STORE
BETWEEN 40F & 100F.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NONE.
Ventilation:LOCAL EXHAUST.
Protective Gloves:RUBBER OR NEOPRENE GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EMERG EYEWASH & DELUGE SHOWER WHICH MEETS
ANSI DESIGN CRITERIA , PROTECTIVE CLOTHING.
Work Hygienic Practices:FOLLOW NORMAL HYGIENE PRACTICES.
Supplemental Safety and Health
PH:7.8-8.1.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Spec Gravity:1.01 (H*2O=1)
pH:SUPDAT
Solubility in Water:COMPLETE
Appearance and Odor:MILKY WHITE LIQUID; MILD ACRYLIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:FOLLOW ALL FEDERAL, STATE & LOCAL WASTE
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.