Product ID:PRO-SEAL 700, BASE COMPOUND
MSDS Date:01/19/1994
FSC:8030
NIIN:01-364-7359
MSDS Number: BYCCG

PRODUCTS RESEARCH & CHEMICAL CORPORATION

5430 SAN FERNANDO ROAD
GLENDALE, CA 91209
US

Emergency Phone: 800-228-6535

Info Phone: 818-240-2060

Cage: DO563

PRODUCTS RESEARCH & CHEMICAL

1800 GLENDALE, CA 91209 US

Telephone: 818-240-2060

Cage: DO563

METHYL ETHYL KETONE

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 15%

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

BISPHENOL A EPOXY RESIN

CAS: 25036-25-3

Fraction By Weight: <5%

METHYL ISOBUTYL KETONE

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 15%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 15%

TALC (CONTAINING NO ASBESTOS),

CAS: 14807-96-6

Fraction By Weight: 10%

POLYACRYLIC RUBBER

CAS: 67254-76-6

GLASS

CAS: 66599-17-3

PUMICE

CAS: 1332-09-8

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:(MEK): EYES-POSSIBLE TRANSIENT CORNEAL
CLOUDING. INHALATION-THROAT IRRITATION. MAY BE ANESTHETIC AND MAY
CAUSE OTHER CENTRAL NERVOUS SYSTEM EFFECTS.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:(MEK): EYES-MAY CAUSE BURNING, TEARING AND
REDDENING. SKIN-PROLONGED EXPOSURE MAY CAUSE REDNESS, BURNING,
DRYING AND CRACKING OF SKIN. INHALATION-MAY CAUSE COUGHING, CHRST
PAIN. MAY CAUSE HEADACHE AND DIZZINESS. INGESTION-MAY CAUSE
DROWSINESS, DIZZINESS AND NAUSEA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH LUKEWARM WATER FOR 15 MINUTES, CONSULT
PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. IF SYMPTOMS PERSIST,
CONSULT A PHYSICIAN. INHALATION: REMOVE TO FRESH AIR. IF SYMPTOMS
ARE PRESENT CO NSULT A PHYSICIAN. INGESTION: CONSULT APHYSICIAN.

Flash Point Method:PMCC
Flash Point:30.0F,-1.1C
Lower Limits:1.8
Upper Limits:1.4
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE AIR SUPPLIED RESPIRATOR. USE WATER TO COOL
HEAT EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:HIGH TEMPERATURES MAY CAUSE PRESSURE
BUILDUP IN CLOSED CONTAINERS.

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. SCOOP INTO
CONTAINER. CLEAN-UP RESIDUE WITH A SUITABLE SOLVENT.
Neutralizing Agent:NONE.

Handling and Storage Precautions:NONE.
Other Precautions:EMPTY DRUMS MAY CONTAIN EXPLOSIVE VAPORS. DO NOT CUT,
PUNCTURE OR WELD ON OR NEAR DRUM. VAPORS OF THIS PRODUCT ARE
HEAVIER THAN AIR AND MAY COLLECT IN LOW OR CONFINED AREAS.

Respiratory Protection:WHEN SPRAYING OR APPLYING IN ANY CIRCUMSTANCES
LIKELY TO PRODUCE LEVELS OF HAZARDOUS INGREDIENTS IN EXCESS OF TLV,
USE AN ORGANIC VAPOR CARTRIDGE OR AIR SUPPLIED RESPIRATOR.
Ventilation:GENERAL VENTILATION TO MAINTAIN VAPOR BELOW PEL.
Protective Gloves:SOLVENT RESISTANT GLOVES
Eye Protection:CHEMICAL GOGGLES OR FULL FACE SHIELD
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE.
Supplemental Safety and Health
FLAMMABLE.

HCC:F2
Vapor Density:>AIR
Spec Gravity:1.18
Appearance and Odor:BLACK HEAVY PASTE.
Percent Volatiles by Volume:46.1

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NOT KNOWN.
Hazardous Decomposition Products:OXIDES OF CARBON.

Waste Disposal Methods:DISPOSE OF SPILLAGE IN COMPLIANCE WITH FEDERAL
AND STATE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.