BYDRL - 502.2 INTERNAL STANDARD MIX 1, 30040-500

  • MSDS: BYDRL
  • Manufacturer: RESTEK CORP
  • Product Name: 502.2 INTERNAL STANDARD MIX 1, 30040-500
  • National Stock Number: 6630-00N061282
Product Identification

Product ID:502.2 INTERNAL STANDARD MIX 1, 30040-500
MSDS Date:07/21/1992
FSC:6630
NIIN:00N061282
MSDS Number: BYDRL

Responsible Party
RESTEK CORP
110 BENNER CIRCLE
BELLEFONTE, PA 16823-8812
US

Emergency Phone: 814-353-1300

Info Phone: 814-353-1300

Cage: 0JL17

Contractor
RESTEK CORP
BELLEFONTE, PA 16823-8812 US

Telephone: 814-353-1300

Cage: 0JL17

Ingredients

METHANOL; (METHYL ALCOHOL) (SARA 313) (CERCLA)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: 98.8%

OSHA PEL 200 PPM, S

ACGIH TLV: 200PPM/250STEL, S

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


1-CHLORO-2-FLUOROBENZENE

CAS: 348-51-6

Fraction By Weight: 0.2%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IRRITATION, HEADACHE, FATIGUE,
DILATED PUPILS, VISUAL DISTURBANCE, BLINDNESS, SHALLOW RESPIRATION,
RESPIRATORY FAILURE, CYANOSIS, CONVULSIONS, COMA, HYPOTENSION,
DEATH. CHRONIC: POSITIVE MUTAGE N (RTECS): GASTROINTESTINAL, LIVER,
KIDNEY, AND CARDIOVASCULAR SYSTEM INJURY, VISUAL IMPAIRMENT,
DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NAUSEA, DROWSINESS, INTOXICATION, SEVERE
DEPRESSION, HEADACHE, VISUAL DISTURBANCE LEADING TO BLINDNESS,
COUGHING, SHORTNESS OF BREATH; BURNING, ITCHING, REDNESS, OR
BLISTERS ON SKIN; BURNING, WATERING , SWELLING AND REDNESS IN EYES.
Medical Cond Aggravated by Exposure:DERMATITIS, DISEASES OF EYES,
LIVER, KIDNEYS, LUNGS, AND CARDIOVASCULAR.

First Aid

First Aid:EYES: REMOVE CONT LENSES IF PRESENT. HOLD EYELIDS OPEN &
IRRIGATE W/LARGE VOL OF WATER FOR AT LEAST 15 MIN. SEEK MD
TREATMENT. SKIN: IMMED WASH W/SOAP & WATER. CONTINUE RINSING W/LGE
VOL OF WATER FOR 15 MIN. REMOVE CONTAM CLTHG. INHAL: REMOVE TO
FRESH AIR. HAVE TRAINED PERS ADMIN OXYGEN & CPR IF NEEDED. SEEK MD
TREATMENT. INGEST: INGEST MAY CAUSE BLINDNESS. IF SWALLOWED, DRINK
LGE VOL OF (SUP DAT)

Fire Fighting

Flash Point:51.8F,11.0C
Lower Limits:6.7%
Upper Limits:36.5%
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, HALON, ALCOHOL FOAM,
WATER MIST OR FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. HEAT MAY BUILD PRESS & RUPTURE CLSD STOR CONTRS. KEEP
FIRE-EXPOSED CONTRS COOL W/WATER SPRAY.
Unusual Fire/Explosion Hazard:MAY FORM EXPLOSIVE VAPOR/AIR MIXTURE.
INCOMPLETE COMBUSTION MAY GENERATE TOXIC VAPORS.

Accidental Release

Spill Release Procedures:WEAR PERSONAL PROTECTIVE EQUIPMENT. ABSORB
SMALL SPILLS ON PAPER, VERMICULITE, OR OTHER ABSORBENT. COLLECT AND
STORE IN CLOSED CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID ALL INHALATION & CONTACT. KEEP
IN TIGHTLY CLOSED CONTAINER AT ALL TIMES. HANDLE W/THE UTMOST CARE.
STORE IN AN EXPLOSION-PROOF FREEZER AT -18C.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR WITH ORGANIC
VAPOR CARTRIDGE.
Ventilation:USE IN AN AREA PROVIDED WITH GENERAL AND LOCAL EXHAUST
VENTILATION MEETING OSHA REQUIREMENTS.
Protective Gloves:SOLV-RESIST. BUTYL RUB, VITON/EQUIV.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:APPRVD EMERG EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA . PROT CLTH MEETING LAB SAFETY REQUIREMENTS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC: WATER, THEN INDUCE VOMITING. DO NOT ATTEMPT TO GIVE
FLUIDS OR INDUCE VOMITING IF PERSON IS UNCONSCIOUS. CONTACT POISON
CONTROL CENTER.

Chemical Properties

Boiling Pt:B.P. Text:149F,65C
Vapor Pres:97 @ 20C
Spec Gravity:0.791
Solubility in Water:MISCIBLE
Appearance and Odor:COLORLESS, WITH ALCOHOL ODOR

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS, REDUCING AGENTS, REACTIVE METALS.
Stability Condition to Avoid:HEAT, CONTACT WITH IGNITION SOURCE.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:INCINERATE AT AN APPROVED FACILITY IN ACCORDANCE
WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.