BYFSZ - TRU-LUXURY SG ENAMEL, V 1400

  • MSDS: BYFSZ
  • Manufacturer: EVR GARD COATINGS CO
  • Product Name: TRU-LUXURY SG ENAMEL, V 1400
  • National Stock Number: 8010-00N062235
Product Identification

Product ID:TRU-LUXURY SG ENAMEL, V 1400
MSDS Date:03/01/1991
FSC:8010
NIIN:00N062235
MSDS Number: BYFSZ

Responsible Party
EVR-GARD COATINGS CO
16400 GARFIELD AVE
PARAMOUNT, CA 90723
US

Emergency Phone: 213-531-0131

Info Phone: 213-531-0131

Cage: 5G582

Contractor
EVR-GARD COATINGS CO
PARAMOUNT, CA 90723 US

Telephone: 310-531-0131

Cage: 5G582

Ingredients

5

CAS: 64742-47-8

RTECS: OA5504000

Fraction By Weight: 17.36%

OSHA PEL 125 PPM (MFR)

ACGIH TLV: 125 PPM (MFR)


2.05 LB/GAL (246

RTECS: 9999999VO

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:IRRITATION OF NOSE, THROAT &
EYES, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA & HEADACHE. SYMPTOMS
DISAPPEAR WHEN EXPOSURE CEASES. EXCESSIVE INHALATION OF VAPORS MAY
RESULT IN DIZZINESS & HEADACHES. U NCONSCIOUSNESS IN EXTREME CASES.
SKIN/EYE CONT:IRRITANT. SKIN ABSORPTION:IRRITANT. AFFECTED AREAS
WILL (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:SHOW SIGNS OF REDNESS & RASH IF NOT
WASHED W/SOAPY WATER IMMED. INGEST:IRRIT OF RESP TRACT CHARACT BY
HDCH, DIZZ, STAG, CONFUSN & UNCON & COMA IN EXTREME CASES. REPORTS
HAVE SHOWN THAT RPTD & PRLNG OCCUP OVEREXP TO SOLVS CAN
CAUSEPERMANENT BRAIN DAMAGE & NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:PROLONGED OR REPEATED CONTACT MAY
CAUSE DERMATITIS.

First Aid

First Aid:INHAL:REMOVE PATIENT TO FRESH AIR. EYE:FLUSH W/PLENTY OF
WATER FOR AT LEAST 15 MINUTES. SKIN:REMOVE SOAKED CLOTHING & WASH
SKIN W/SOAPY WATER IMMEDIATELY. APPLY LOTION OR OIL ON AFFECTED
AREA AFTER TH OROUGH WASHING. INGEST:DO NOT INDUCE VOMITING. CALL
MD IMMEDIATELY.

Fire Fighting

Flash Point:105F,41C
Lower Limits:1%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
FIGHT AS VOLAT LIQ FIRE. CLSD CNTNRS MAY EXPLODE WHEN EXPOS TO
EXTREME HEAT. KEEP AWAY FROM AREAS (SUPDAT)
Unusual Fire/Explosion Hazard:AVOID APPLICATION IN AREAS OF PILOT
LIGHTS, SPKS/OTHER IGNIT SOURCES AS VAPS MAY ACCUM ON FLOOR &
IGNITE. KEEP CNTNRS CLSD TIGHTLY & STORE IN COOL PLACE(SUPDAT)

Accidental Release

Spill Release Procedures:ABSORB SPILLED MATERIAL W/ABSORBENTS, SUCH AS
SAWDUST, CLAYS, ETC & FLUSH SPILL AREA W/LOTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE NEAR OPEN FLAME/SOURCES
OF IGNIT. DO NOT STORE IN HIGH TEMP STORAGE. IN CASE OF FIRE,
REMOVE CLSD CNTNRS FROM AREAS EXPOS TO FIRE.
Other Precautions:EMPTY CNTNRS USUALLY STILL HOLD RESIDUES OF MATL &
VAPS. THESE MUST BE CONSIDERED HAZ & DISP OF I/A/W PROPER HNDLG
PROCS PRESCRIBED FOR HAZ CHEMS. AVOID PRLNG CONT/OVEREXP. PROVIDE
ADEQ VENT AT ALL TI MES WHEN APPLYING THIS PRODUCT.

Exposure Controls

Respiratory Protection:USE OF NIOSH/MSHA APPROVED RESPIRATORS IS
RECOMMENDED WHEN USING SOLVENT BASED COATINGS. WHEN LEVEL OF
SOLVENT VAPOR IS NOT KNOWN/EXCEEDS LEVEL AT WHICH REGULAR RESPS ARE
EFTIVE, USE OF NIOSH/MSHA APP RVD SUCH AS TC-19C IS HIGHLY REC.
Ventilation:BE SURE TO PROVIDE ADEQ VENT IN ALL WORKING AREAS AT ALL
TIMES. SERIOUS HLTH PROBS COULD RSLT FROM RPTD & PRLNG EXPOS.
Protective Gloves:NEOPRENE OR BUNA N GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:STANDARD HYGIENIC PRACTICES MUST BE OBSERVED
WHEN HANDLING THIS PRODUCT & ALL CHEMICALS.
Supplemental Safety and Health
FIRE FIGHT PROC:EXPOSED TO FIRE. EXPLO HAZ:WHEN NOT IN USE.

Chemical Properties

Boiling Pt:B.P. Text:168F,76C
Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:1.4 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT SOLUBLE
Appearance and Odor:WHITE PAINT & COLORS; PAINT THINNER ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALIS. LONG TERM CONTACT W/WATER.
Stability Condition to Avoid:AVOID OPEN FLAMES, WELDING ARCS OR OTHER
HIGH TEMPERATURE SOURCES WHICH INDUCE THERMAL DECOMPOSITION & FIRE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
DIOXIDE &/OR CARBON MONOXIDE.

Disposal

Waste Disposal Methods:DISPOSE OF ALL WASTES, INCLUDING ABSORBENTS USED
TO CLEAN UP SPILLS INTO 55-GAL METAL CONTAINERS & DISPOSE IN
APPROVED DUMPSITE I/A/W PRESCRIBED FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.