BYFTM - CEFOXITIN SODIUM, C4786
- MSDS: BYFTM
- Manufacturer: SIGMA CHEMICAL CO
- Product Name: CEFOXITIN SODIUM, C4786
- National Stock Number: 6505-00N062351
Product Identification
Product ID:CEFOXITIN SODIUM, C4786
MSDS Date:12/23/1992
FSC:6505
NIIN:00N062351
MSDS Number: BYFTM
Responsible Party
US
Emergency Phone: 314-771-5765
Info Phone: 800-325-3010
Cage: 0DK69
Contractor
Telephone: 314-771-5765
Cage: 0DK69
Ingredients
5-THIA-1-AZABICYCLO(4.2.0)OCT-2-ENE-2-CARBOXYLIC ACID,
CAS: 33564-30-6
RTECS: XI0330500
OSHA PEL N/K
ACGIH TLV: N/K
((2-THIENYLACETYL)AMINO)-, MONOSODIUM SALT,
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:LD50:(ORAL,RAT) >10 GM/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:MAY BE HARMFUL BY INHALATION,
INGESTION OR SKIN ABSORPTION. MAY CAUSE IRRITATION. PROLONGED OR
REPEATED EXPOSURE MAY CAUSE ALLERGIC REACTIONS IN CERTAIN SENSITIVE
INDIVIDUALS. SHOWS CROSS-ALLERG ENICITY W/PENICILLIN. THE
TOXICOLOGICALPROPERTIES HAVE NOT BEEN THOROUGHLY INVESTIGATED.
TARGET ORGAN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:DATA:KIDNEY, URETER, BLADDER
(INTERSTITIAL NEPHRITIS). BLOOD (NORMOCYTIC ANEMIA; APLASTIC
ANEMIA).
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:WASH OUT MOUTH W/WATER PROVIDED PERSON IS CONSCIOUS.
CALL MD. SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. REMOVE CONTAMINATE CLOTHING & SHOES. CALL MD. INHAL:REMOVE
TO FRESH AIR. IF BREATHING BECOMES DIFFICULT, CALL MD. EYES:FLUSH
W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. ASSURE ADEQUATE
FLUSHING BY SEPARATING EYELIDS W/FINGERS. CALL MD.
Fire Fighting
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL POWDER OR
APPROPRIATE FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
Accidental Release
Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT. SWEEP UP, PLACE IN
A BAG & HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE AREA
& WASH SPILL SITE AFTER MATERIAL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:CAUTION:AVOID CONTACT & INHALATION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:CHEMICAL-RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . OTHER PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Appearance and Odor:SOLID.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
NITROGEN OXIDES.
Disposal
Waste Disposal Methods:DISSOLVE OR MIX MATERIAL W/COMBUSTIBLE SOLVENT &
BURN IN A CHEMICAL INCINERATOR EQUIPPED W/AFTERBURNER & SCRUBBER.
OBSERVE ALL FEDERAL, STATE & LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.