BYGFT - 44803, KIT PCB-A-21 ISOOCTANE 6 X 1 ML, (SUPDAT)

  • MSDS: BYGFT
  • Manufacturer: SUPELCO INC
  • Product Name: 44803, KIT PCB-A-21 ISOOCTANE 6 X 1 ML, (SUPDAT)
  • National Stock Number: 6850-00N018148
Product Identification

Product ID:44803, KIT PCB-A-21 ISOOCTANE 6 X 1 ML, (SUPDAT)
MSDS Date:05/25/1994
FSC:6850
NIIN:00N018148
Kit Part:Y
MSDS Number: BYGFT

Responsible Party
SUPELCO INC
SUPELCO PARK
BELLEFONTE, PA 16823-0048
US

Emergency Phone: 814-359-3441

Info Phone: 814-359-3441

Cage: 54968

Contractor
SIGMA-ALDRICH INC.
14508 ST. LOUIS, MO 63103 US

Telephone: 314-771-5765/414-273-3850X5996

Cage: 54968

Ingredients

POLYCHLORINATED BIPHENYL (AROCLOR 1262); (AROCLOR 1262)

CAS: 37324-23-5

RTECS: TQ1364000

Fraction By Weight: 0.1%

OSHA PEL 0.5 MG/M3 (MFR)

ACGIH TLV: 0.5 MG/M3 (MFR)


PENTANE, 2,2,4-TRIMETHYL-; (PENTANE,

CAS: 540-81-1

RTECS: SA3320000

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:SEE INGREDIENT 1
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CONTAINS MATERIAL KNOWN TO THE STATE
OF CALIFORNIA TO CAUSE CANCER, HUMAN SUSPECT CARCINOGEN, CLASSIFIED
BY NTP AS GROUP B, CLASSIFIED BY IARC AS GROUP 2A. (MFR)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH EYES WITH WATER FOR AT LEAST 15 MINUTES. SKIN:
FLUSH SKIN WITH LARGE VOLUMES OF WATER. INHALATION: IMMEDIATELY
MOVE TO FRESH AIR. GIVE OXYGEN IF BREATHING IS LABORED. IF
BREATHING STOPS, G IVE ARTIFICIAL RESPIRATION. INGESTION: NEVER
GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. NEVER TRY TO MAKE
AN UNCONSCIOUS PERSON VOMIT. DO NOT INDUCE VOMITING.

Fire Fighting

Flash Point Method:CC
Flash Point:10F,-12C
Lower Limits:1.1%
Upper Limits:6%
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CAN REACT VIGOROUSLY WITH REDUCING
MATERIALS.

Accidental Release

Spill Release Procedures:TAKE UP WITH ABSORBENT MATERIAL. VENTILATE
AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN SEALED CNTNR IN COOL, DRY
LOCATION. KEEP AWAY FROM HEAT. STORE IN DRY, WELL VENTILATED AREA.
KEEP AWAY FROM IGNITION SOURCES.
Other Precautions:AVOID EYE OR SKIN CONTACT. AVOID BREATHING VAPORS.

Exposure Controls

Respiratory Protection:WEAR NIOSH/MSHA APPROVED FACE MASK WITH ORGANIC
VAPOR CANISTER.
Ventilation:USE ONLY IN WELL VENTILATED AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NOT APPLICABLE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO: AROCLOR 1262.

Chemical Properties

Boiling Pt:B.P. Text:210F,99C
Melt/Freeze Pt:M.P/F.P Text:-177F,-116C
Vapor Pres:41
Vapor Density:3.90
Spec Gravity:0.690 (H*2O=1)
Evaporation Rate & Reference:>1 (ETHER =1)
Appearance and Odor:CLEAR, COLORLESS LIQUID.
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
REDUCING AGENTS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:NOT APPLICABLE.

Disposal

Waste Disposal Methods:COMPLY WITH ALL FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.