BYMTF - PS-60 DIURON

  • MSDS: BYMTF
  • Manufacturer: CHEM SERVICE INC
  • Product Name: PS-60 DIURON
  • National Stock Number: 6810-00F046305
Product Identification

Product ID:PS-60 DIURON
MSDS Date:01/25/1995
FSC:6810
NIIN:00F046305
MSDS Number: BYMTF

Responsible Party
CHEM SERVICE INC
660 TOWER LN
WEST CHESTER, PA 19381-3108
US

Emergency Phone: 215-386-2100/215-692-3026

Info Phone: 215-692-3026/800-452-9994

Cage: 84898

Contractor
CHEM SERVICE, INC
599 WEST CHESTER, PA 19301-9650 US

Telephone: 610-692-3026

Cage: 8Y898

Ingredients

DIURON *95-4*

CAS: 330-54-1

RTECS: YS8925000

ACGIH TLV: 10 MG/CUM

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Hazards

LD50 LC50 Mixture:ORAL LD50(RAT): 3400 MG/KG DIURON
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAN CAUSE SKIN IRRTATION. MAY BE
HARMFUL IF INHALED, SWALLOWED/ABSORBED THROUGH THE SKIN. CAN BE
IRRITATING TO MUCOUS MEMBRANES. CAN CAUSE BLOOD DISORDERS.
DUST/VAPORS CAN CAUSE IRRITATION TO RESPIRAT ORY TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, INFLAMMATION, SWELLING.

First Aid

First Aid:EYES: FLUSH CONTINOUSLY W/WATER FOR 15-20 MINS. SKIN: FLUSH
W/WATER FOR 15-20 MINS. USE SOAP & WATER TO CLEANSE IF THERE ARE NO
BURNS. INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN/CPR IF NEEDED.
KEEP WARM & QUIET. INGESTION: INDUCE VOMITING. DON'T GIVE
LIQUIDS/INDUCE VOMITING TO AN UNCONSCIOUS/CONVULSING PERSON. IF
VOMITING, MAKE SURE AIRWAY DOESN'T BECOME OBSTRUCTED BY VOMIT. (SEE
SUPP)

Fire Fighting

Extinguishing Media:C02, DRY CHEMICAL POWDER/SPRAY.

Accidental Release

Spill Release Procedures:EVACUATE AREA. WEAR APPROPRIATE EQUIPMENT.
VENTILATE AREA. SWEEP UP & PLACE IN AN APPROPRIATE CONTAINER. HOLD
FOR DISPOSAL. WASH CONTAMINATED SURFACES TO REMOVE ANY RESIDUES.

Handling

Handling and Storage Precautions:KEEP TIGHTLY CLOSED. STORE IN A COOL
DRY PLACE. STORE ONLY W/COMPATIBLE CHEMICALS. FOR LABORATORY USE
ONLY.
Other Precautions:AVOID CONTACT W/SKIN, EYES & CLOTHING. DON'T BREATHE
VAPORS. CONTACT LENSES SHOULDN'T BE WORN IN THE LABORATORY. READILY
ABSORBED & RETAINED ON CLOTHING &/SHOES. PERSONS NOT PROPERLY
TRAINED SHOULDN'T HANDLE THIS PRODUCT.

Exposure Controls

Respiratory Protection:USE APPROPRIATE OSHA/MSHA APPROVED SAFETY
EQUIPMENT.
Ventilation:SHOULD BE HANDLED ONLY IN A HOOD
Eye Protection:EYE SHIELDS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
MELTING POINT: 316.4-318.2F. FIRST AID: OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:(SEE SUPP)
Vapor Pres:0
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORLESS CRYSTALLINE SOLID

Stability

Stability Indicator/Materials to Avoid:YES
ALKALINES, ACIDS
Stability Condition to Avoid:HEAT

Disposal

Waste Disposal Methods:BURN IN A CHEMICAL INCINERATOR EQUIPPED W/AN
AFTERBURNER & SCRUBBER IAW/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.