BYMVH - METAL MASTER (METAL POLISH)
- MSDS: BYMVH
- Manufacturer: M AND M HERITAGE INC
- Product Name: METAL MASTER (METAL POLISH)
- National Stock Number: 7930-00F046343
Product Identification
Product ID:METAL MASTER (METAL POLISH)
MSDS Date:11/06/1990
FSC:7930
NIIN:00F046343
MSDS Number: BYMVH
Responsible Party
DENTON, TX 76205-5000
US
Emergency Phone: 817-898-1400
Info Phone: 817-898-1400
Cage: MHERT
Contractor
Telephone: 817-898-1400
Cage: MHERT
Ingredients
ALIPHATIC HYDROCARBON *95-4*
CAS: 64752-48-9
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INHALATION:
NARCOSIS AT VERY HIGH CONCENTRATIONS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DIZZINESS, LIGHTHEADEDNESS.
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR, GIVE CPR IF NEEDED. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:135F
Lower Limits:1
Extinguishing Media:FOAM, DRY CHEMICAL, CO2, WATER FOG
Fire Fighting Procedures:WEAR SCBA. WATER UNSUITABLE FOR EXTINGUISHING
MEDIA, BUT HELPFUL IN KEEPING CONTAINERS COOL. AVOID SPREADING
BURNING MATERIAL W/WATER, USED FOR COOLING.
Accidental Release
Spill Release Procedures:NORMAL CLEANUP PROCEDURES.
Handling
Handling and Storage Precautions:KEEP CONTAINERS COOL, DRY & AWAY FROM
IGNITION SOURCES. USE & STORE W/ADEQUATE VENTILATION.
Other Precautions:AVOID INHALATION OF VAPORS.
Exposure Controls
Respiratory Protection:IF ABOVE TLV, USE NIOSH APPROVED CARTRIDGE
RESPIRATOR.
Ventilation:MECHANICAL (GENERAL): TO KEEP BELOW TLV
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GOGGLES/EYE SHIELD
Other Protective Equipment:EYE WASHES, SHOWER.
Supplemental Safety and Health
EVAPORATION RATE: (BU AC =1): SLOWER THAN ETHER.
Chemical Properties
Boiling Pt:B.P. Text:318-383F
Vapor Pres:13
Vapor Density:>1
Evaporation Rate & Reference:(SEE SUPP)
Solubility in Water:INSOLUBLE
Appearance and Odor:IMPREGNATED IN COTTON, BLUE COLOR W/SLIGHT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS/BASES.
Stability Condition to Avoid:HOT METAL SURFACES, IGNITION SOURCES.
Hazardous Decomposition Products:CO, CO2
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.