BYMWS - 40500 THROUGH 40608 ENVIROSPRAY
- MSDS: BYMWS
- Manufacturer: ENVIRONMENTAL TECHNOLOGY INC
- Product Name: 40500 THROUGH 40608 ENVIROSPRAY
- National Stock Number: 8010-00F046387
Product Identification
Product ID:40500 THROUGH 40608 ENVIROSPRAY
MSDS Date:03/01/1990
FSC:8010
NIIN:00F046387
MSDS Number: BYMWS
Responsible Party
FIELDS LANDING, CA 95537-5000
US
Emergency Phone: 707-443-9323
Info Phone: 707-443-9323
Preparer: DAVID FONSEN
Cage: ENVIR
Contractor
Telephone: 410-321-5200
Cage: 0WWE2
Ingredients
2-BUTOXYETHANOL (ETHYLENE GLYCOL MONOBUTYL ETHER), BUTYL
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 3-7%
OSHA PEL 50 PPM (SKIN)
ACGIH TLV: 25 PPM (SKIN)
BUTANOL, N-BUTYL ALCOHOL, PROPYL CARBINOL, BUTYL ALCOHOL
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 1-5%
OSHA PEL 100 PPM
ACGIH TLV: C 152 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 3-7%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM
DIMETHYL ETHER, METHYL ETHER
CAS: 115-10-6
RTECS: PM4780000
Fraction By Weight: 15-40%
ACGIH TLV: NONE
Hazards
LD50 LC50 Mixture:ORAL LD50(RAT): 530-1480 MG/KG
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION, DERMATITIS. EYES:
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DIZZINESS, NAUSEA, DEFATTING.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN/EYES: FLUSH W/COPIOUS
AMOUNTS OF WATER. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:53.6-159.8F
Lower Limits:1
Upper Limits:12
Extinguishing Media:DRY CHEMICAL, CO2, FOAM.
Fire Fighting Procedures:WATER FROM FOGGING NOZZLES MAY BE USED TO COOL
CLOSED CONTAINES.
Unusual Fire/Explosion Hazard:AUTOIGNITION TEMP: 473-852.8F. CONTAINERS
MAY EXPLODE IF EXPOSED TO TEMP >122F.
Accidental Release
Spill Release Procedures:REMOVE IGNITION SOURCES. USE INERT ABSORBENT
MATERIAL & NON-SPARKING TOOLS. AVOID BREATHING FUMES. VENTILATE
AREA. PREVENT FROM ENTERING A WATERCOURSE.
Handling
Handling and Storage Precautions:STORE IN A COOL, WELL VENTILATED AREA
NOT TO EXCEED TEMP 122F.
Other Precautions:DON'T PUNCTURE/INCINERATE CONTAINERS, EVEN WHEN
EMPTY. AVOID BREATHING FUMES.
Exposure Controls
Respiratory Protection:IF USED INDOORS ON A CONTINUOUS BASIS, USE OF
CARTRIDGE TYPE RESPIRATOR.
Ventilation:LOCAL EXHAUST VENTILATION.
Protective Gloves:NOT NORMALLY REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NOT NORMALLY REQUIRED.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:179.6-338F
Melt/Freeze Pt:M.P/F.P Text:-129F-32F
Vapor Pres:55-60
Vapor Density:2-4.1
Spec Gravity:1
pH:8.7-10
Evaporation Rate & Reference:(BU AC =1): 0.1-1.7
Solubility in Water:36-39%/WT
Appearance and Odor:VARIOUS COLOURS W/ALCOHOLIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:STORAGE IN HOT, UNVENTILATED AREAS.
Hazardous Decomposition Products:HYDROCARBON FUMES & SMOKE, CO.
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.