BYSFF - FS# 37038 LUSTERLESS BLACK,UC65071

  • MSDS: BYSFF
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: FS# 37038 LUSTERLESS BLACK,UC65071
  • National Stock Number: 8010-01-344-6687
Product Identification

Product ID:FS# 37038 LUSTERLESS BLACK,UC65071
MSDS Date:01/10/1996
FSC:8010
NIIN:01-344-6687
MSDS Number: BYSFF

Responsible Party
PPG INDUSTRIES INC
4325 ROSANNA DRIVE
ALLISON PARK, PA 15101
US

Emergency Phone: 800-441-9695, 304-843-1300

Info Phone: 412-492-5555,800-441-9695

Preparer: NONE

Cage: 93915

Contractor
PPG INDUSTRIES INC CHEMICAL DIVISION
PITTSBURGH, PA 15222-1416 US

Telephone: 304-843-1300

Cage: 93915

Ingredients

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 1-2%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9495


SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 15-20%

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST;9495


DEIONIZED WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 50-55%


DIETHYLENE GLYCOL MONOPROPYL ETHER

CAS: 6881-94-3

Fraction By Weight: 2-5%


2,2,4 TRIMETHYL 1,3 PENTANEDIOL ISOBUTYRATE

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1-2%


BENZYL ALCOHOL

CAS: 100-51-6

RTECS: DN3150000

Fraction By Weight: 1-2%


FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 20-25%


SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 15-20%

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST;9495


GLYCOL ETHERS

Fraction By Weight: 2-5%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: IRRITATION. SKIN: SLIGHT
IRRITATION. INHALATION: VAPOR AND/OR SPRAY MIST MAY BE HARMFUL IF
INHALED. SANDING OR GRINDING DUSTS MAY BE HARMFUL IF INHALED.
INGESTION: HARMFUL OR FATAL IF SWA LLOWED. CHRONIC: LONG TERM
EXPOSURE TO CRYSTALLINE SILICA/QUARTZ MAY LEAD TO A DISABLING
INJURY KNOWN AS SILICOSIS.
Explanation of Carcinogenicity:QUARTZ IS CARCINOGENIC ACCORDING TO
CRITERIA ESTABLISHED BY IARC.
Effects of Overexposure:EYES: IRRITATION, ITCHING, BURNING SENSATION,
VISUAL DISTURBANCES. SKIN: IRRITATION, ITCHING, CRACKING, BURNING,
REDNESS, SWELLING. INHALATION: SPRAY MIST, SANDING OR GRINDING DUST
MAY BE HARMFUL. ING ESTION: HARMFUL OR FATAL IF INGESTED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. GET MEDICAL
ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING. FLUSH AREA WITH
LARGE AMOUNTS OF WATER FOLLOWED BY WASHING WITH SOAP AND WATER. IF
ADVERSE SYMPTOMS DEVELOP, GET MEDICAL ATTENTION. INHALATION: MOVE
TO FRESH AIR. APPLY CPR AND OTHER SUPPORTIVE MEASURES AS REQUIRED.
GET MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. GET
MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:PMCC
Lower Limits:0.0%
Extinguishing Media:NFPA CLASS B EXTINGUISHERS (CARBON, DRY CHEMICAL OR
AQUEOUS FILM FORMING FOAM) FOR NFPA IIIB COMBUSTIBLE LIQUID FIRES.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE.WATER SPRAY MAY
BE USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILD-UP AND
EXPLOSION.IF WATER USED,FOG NOZZLES PREFERRED.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. TOXIC GASES MAY FORM WHEN PRODUCT IS
CONTACTED BY FLAME OR HOT SURFACES.

Accidental Release

Spill Release Procedures:VENTILATE AREA. REMOVE ALL SOURCES OF
IGNITION. TAKE UP SPILL WITH SAND, VERMICULITE, OR OTHER INERT
ABSORBANT AND PLACE IN CLEAN, EMPTY CONTAINER FOR DISPOSAL. ONLY
THE SPILLED MATERIAL AND THE ABSOR BANT SHOULD BE PLACED IN THIS
CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS 111B COMBUSTIBLE LIQUIDS.
Other Precautions:CONTAINER SHOULD BE GROUNDED WHEN POURING. AVOID
LIQUID FREE FALL IN EXCESS OF FEW INCHES. IF THIS MATERIAL IS PART
OF MULTIPLE COMPONENT SYSTEM, READ MSDS'S FOR OTHER COMPONENTS
BEFORE BLENDING SINCE MIXTURE MAY HAVE HAZARDS OF ALL PARTS.

Exposure Controls

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE
NIOSH/MSHA-APPROVED AIR PURIFYING OR AIR SUPPLIED RESPIRATOR.
Ventilation:PROVIDE GENERAL DILUTION/LOCAL EXHAUST VENTILATION IN
VOLUME AND PATTERN TO KEEP EXPOSURE BELOW LOWEST SUGGESTED LIMITS.
Protective Gloves:WEAR GLOVES (NITRILE OR NEOPRENE).
Eye Protection:CHEMICAL-TYPE SPLASH GOGGLES.
Other Protective Equipment:WEAR PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSING.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:T6
Boiling Pt:B.P. Text:212 TO 471F
Vapor Pres:17.2
Vapor Density:>1
Spec Gravity:1.14
Evaporation Rate & Reference:32 (BUOAC=100)
Solubility in Water:APPRECIABLE (54.8%)
Appearance and Odor:VISCOUS LIQUID. CHARACTERISTIC OF THE INGREDIENT
SOLVENTS.
Percent Volatiles by Volume:65.20

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE TEMPERATURES.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS DECOMPOSITION
PRODUCTS WHEN HEATED. WELDING, BRAZING, FLAME-CUTTING MAY PRODUCE
FUMES.

Disposal

Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR
DISPOSED OF THROUGH AN APPROVED WASTE MANAGEMENT FACILITY

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.