Product ID:G72B
MSDS Date:02/20/1992
FSC:3439
NIIN:01-380-1935
MSDS Number: BYSFS

DYNAMET INC. POWDER PRODUCTS DIV.

600 MAYER STREET
BRIDGEVILLE, PA 15017-2777
US

Emergency Phone: 412-257-5102

Info Phone: 412-257-5102

Preparer: A.J. GREGUS

Cage: 0R811

DYNAMET INC. POWDER PRODUCTS DIV.

BRIDGEVILLE, PA 15017-2777 US

Telephone: 412-257-5102

Cage: 0R811

ALUMINUM

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 0-3%

ACGIH TLV: 10 MG/M3

BORON

CAS: 7440-42-8

RTECS: ED7350000

Fraction By Weight: 0-2%

OSHA PEL 10 MG B203/M3

ACGIH TLV: 10 MG B2O3/M3

COBALT

CAS: 7440-48-4

RTECS: GF8750000

Fraction By Weight: 0-50%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3

CHROMIUM

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 0-25%

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

COPPER

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 0-1%

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 0-90%

MANGANESE

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0-8%

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0-10%

OSHA PEL 10 PPM.

ACGIH TLV: 10 PPM.

NICKEL

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 0-80%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

VANADIUM PENTOXIDE

CAS: 1314-62-1

RTECS: YW2450000

Fraction By Weight: 0-12%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TANTALUM

CAS: 12070-06-3

Fraction By Weight: 0.20%

OSHA PEL 5 MG TA/M3

ACGIH TLV: 5 MG TA/M3

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 0-5%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:NO TOXIC EFFECTS WOLD BE EXPECTED FROM
ITS INERT SOLID FROM. PROLONGED EXPOSURE TO FUMES OR DUSTS
GENERATED DURING HEATING, CUTTING, BRAZING OR WELDING MAY CAUSE
ADVERSE HEALTH EFFECTS DUE TO SOME OF THE CONSTITUENTS MENTIONED
IN THE FORMULA OR TYPICAL ANALYSIS. SOME CONSTITUENTS POSE MORE
POTENTIAL HAZARDS THAN OTHERS
Explanation of Carcinogenicity:CHROMIUM AND NICKEL AND THEIR COMPOUNDS
ARE LISTED AS CARCINOGENS BY NTP & IARC. SEE INDIVIDUAL REPORTS FOR
DETAILS.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHALATION: INCASE OF OVEREXPOSURE, IMMEDIATELY MOVE PERSON
FROM CONTAMINATED AIR TO FRESH AIR AT ONCE. GIVE ARTIFICAL
RESPIRATION IF BREATHING HAS STOPPED OR OXYGEN IF NECESSARY. GET
MEDICAL ATTENTIO N IF NECESSARY.

Flash Point:"NOT APPLICABLE"
Extinguishing Media:NO FIRE OR EXPLOSION HAZARDS.
Fire Fighting Procedures:"NOT APPLICABLE"
Unusual Fire/Explosion Hazard:"NOT APPLICABLE"

Spill Release Procedures:"NOT APPLICABLE"

Handling and Storage Precautions:NO SPECIAL HANDLING IS REQUIRED IN ITS
INERT SOLID FORM. DURING WELDING, AIRBORN CONTAMINENTS & NOXIOUS
GASES MAY ORIGIONATE FROM THE WELDING ROD.
Other Precautions:"WE CANNOT COMPREHEND ALL OF THE VARIOUS SITUATIONS
THAT MAY ARISE IN THE USE OF OUR PRODUCTS, THEREFORE OUR CUSTOMERS
ARE RESPONSIVLE FOR ANY HAZARDS AND PRECAUTIONS NOT LISTED ON THIS
MATERIAL SAFET Y DATA SHEET."

Respiratory Protection:USE DUST MASK WHEN HANDLING POWDER FORM OF
ALLOY.
Ventilation:USE OF EXHAUST SYSTEMS ARE SUGGESTED FOR ABRASIVE CUTTING,
GRINDING, WELDING, AND BURNING.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES OR WELDERS' GOGGLES
Other Protective Equipment:PRECAUTION SHOULD BE TAKEN TO PROTECT
AGAINST BURNS.
Work Hygienic Practices:USE GOOD INDUSTRIAL HYGIENE PRACTICE. AVOID
UNNECESSARY CONTACT. WASH THOROUGHLY BEFORE EATING OR DRINKING
Supplemental Safety and Health
NONE

HCC:N1
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:5000F,2760C
Spec Gravity:POWDER
Appearance and Odor:ODORLESS SOLID WITH METALLIC LUSTER, AVAILABLE IN
SNEET,STRIP,BAR,ROD,BILLET,ET

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:METAL FUMES AND CERTAIN NOXIOUS GASES
SUCH AS CARBON MONOXIDE, MAY BE PRODUCED DURING WELDING OPERATIONS.
Conditions to Avoid Polymerization:WILL NOT OCCUR

Waste Disposal Methods:"NOT APPLICABLE" (IT IS RECOMMENDED THAT ALL
SCRAP GENERATED BE RECLAIMED AND SUBSEQUENTLY RECYCLED.)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.