BYWFM - ASPHALT PRIMER

  • MSDS: BYWFM
  • Manufacturer: MONSEY PRODUCTS CO
  • Product Name: ASPHALT PRIMER
  • National Stock Number: 5610-00N062676
Product Identification

Product ID:ASPHALT PRIMER
MSDS Date:04/25/1994
FSC:5610
NIIN:00N062676
MSDS Number: BYWFM

Responsible Party
MONSEY PRODUCTS CO
COLD STREAM RD
KIMBERTON, PA 19442
US

Emergency Phone: 610-933-8888

Info Phone: 610-933-8888

Cage: 6W507

Contractor
MONSEY PRODUCTS CO
368 KIMBERTON, PA 19442 US

Telephone: 610-933-8888

Cage: 6W507

Ingredients

STODDARD SOLVENT; (PETROLEUM DISTILLATE)

CAS: 8052-41-3

RTECS: WJ8925000

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


ASPHALT

CAS: 8052-42-4

RTECS: CI9900000

OSHA PEL N/K

ACGIH TLV: 5 MG/M3; (FUME)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:OVEREXPOSURE TO VAPORS CAUSES
EYE IRRITATION, BLURRED VISION, DIZZINESS, HEADACHES, EVEN
UNCONSCIOUSNESS. PROLONGED OR REPEATED SKIN CONTACT CAN CAUSE
MODERATE IRRITATION, DEFATTING, DERMATITIS. SWALLOWING CAN CAUSE
GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING, AND DIARRHEA.
CHRONIC:ASPIRATION (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:OF MATERIAL INTO LUNGS CAN CAUSE
CHEMICAL PNEUMONITIS WHICH CAN BE FATAL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:REMOVE FROM VAP IMMED. IF OVERCOME, CALL PHYS. IF BRTHG
STOPPED/IRREGULAR, START RESUSCITATION/ADMIN OXYG, AS NEEDED.
EYES:FLUSH W/LG AMTS OF WATER, LIFTING UPPER & LOWER LIDS OCCASNLY
FOR @ LEA ST 15 MINS. GET MED ATTN. SKIN:REMOVE CONTAMD CLOTHES &
WASH W/WATERLESS HANDCLEANER/SOAP & WATER. INGEST:DO NOT INDUCE
VOMITING.

Fire Fighting

Flash Point Method:SCC
Flash Point:105F,41C
Lower Limits:0.9%
Upper Limits:6.0%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG, SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:DO NOT MIX/STORE W/STRONG OXIDANTS LIKE
LIQ CHLORINE/OXYG. KEEP CNTNRS TIGHTLY CLSD. CLSD CNTNRS MAY
EXPLODE WHEN EXPOSED TO EXTREME HEAT. APPLIC TO (SUPDAT)

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF IGNIT. KEEP PEOPLE AWAY.
RECOVER FREE LIQ. ADD ABSORB (SAND, EARTH, SAWDUST, ETC.) TO SPILL
AREA. AVOID BRTHG VAP. VENT CONFINED SPACES. OPEN ALL WINDOWS &
DOORS. KEEP PROD OUT OF SE WERS & WATERCOURSES BY
DIKING/IMPOUNDING, (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLSD WHEN NOT IN USE.
DO NOT HANDLE OR STORE NEAR HEAT, SPARKS, FLAME, OR STRONG
OXIDANTS. ADEQUATE VENTILATION REQUIRED.
Other Precautions:AVOID BREATHING VAPORS. AVOID PROLONGED OR REPEATED
CONT W/SKIN. REMOVE CONTAMD CLTHG & LAUNDER BEFORE REUSE. REMOVE
CONTAMD SHOES & THORO DRY BEFORE REUSE. WASH SKIN THORO W/SOAP &
WATER AFTER CONTAC T.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST:FACE VELOCITY 60 FPM. SPECIAL:USE ONLY WITH
ADEQUATE VENTILATION.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:USE CHEMICAL RESISTANT APRON. ANSI APPRVD
EMERGENCY EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:PRACTICE GOOD WORK HYGIENE.
Supplemental Safety and Health
EXPLO HAZ:HOT SURF REQ SPECIAL PREC. DURING EMER CNDTNS, OVEREXP TO
DECOMP PROD MAY CAUSE HLTH HAZ. SYMPS MAY NOT BE IMMED APPARENT.
OBTAIN MED ATTN. SPILL RELEASE:ELSE ADVISE AUTH.

Chemical Properties

Boiling Pt:B.P. Text:>310F,>154C
Vapor Pres:2 @ 68F
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER (BUTYL ACETATE =1)
Solubility in Water:NONE
Appearance and Odor:BLACK FLUID, ODOR CHARACTERISTIC OF PETROLEUM
SOLVENT.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES, SMOKE, AND CO*2; CARBON
MONOXIDE IF COMBUSTION IS INCOMPLETE.

Disposal

Waste Disposal Methods:ASSURE CONFORMITY WITH APPLICABLE DISPOSAL
REGULATIONS. DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.