BYWSG - 1-HEXADECANOL

  • MSDS: BYWSG
  • Manufacturer: MALLINCKRODT INC
  • Product Name: 1-HEXADECANOL
  • National Stock Number: 6810-00N063279
Product Identification

Product ID:1-HEXADECANOL
MSDS Date:02/09/1987
FSC:6810
NIIN:00N063279
MSDS Number: BYWSG

Responsible Party
MALLINCKRODT INC
PARIS, KY 40362
US

Emergency Phone: 314-982-5000

Info Phone: 314-982-5000

Cage: 62910

Contractor
MALLINCKRODT SPECIALTY CHEMICALS CO
PHILLIPSBURG, NJ 08865 US

Telephone: 908-859-2151

Cage: 62910

Ingredients

1-HEXADECANOL; (CETYL ALCOHOL)

CAS: 36653-82-4

RTECS: MM0225000

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:LD50: (ORAL, RAT) 6400 MG/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INFORMATION ON HUMAN HEALTH EFFECTS
FROM EXPOSURE TO THIS SUBSTANCE IS LIMITED. INHALATION/ INGESTION:
NO INFORMATION FOUND BUT COMPOUND SHOULD BE HANDLED AS A POTENTIAL
HEALTH HAZARD. SKIN CONTACT: M AY CAUSE IRRITATION. MAY BE ABSORBED
THROUGH THE SKIN. EYE CONTACT: MAY CAUSE IRRITATION. CHRONIC: NO
INFORMATION FOUND.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO INFORMATION FOUND.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP. IF
BRTHG IS DFCLT, GIVE OXYGEN. CALL MD. INGEST: CALL MD IMMED. SKIN:
REMOVE ANY CONTAMD CLTHG. WASH SKIN W/SOAP OR MILD DETERGENT &
WATER FOR AT LEAST 15 MIN. GET MED ATTN IF IRRITDEVELOPS/PERSISTS.
EYES: WASH EYES W/PLENTY OF WATER FOR AT LEAST 15 MIN, LIFTING
LOWER & UPPER EYELIDS OCCASIONALLY. GET MED ATTN IMMED.

Fire Fighting

Extinguishing Media:WATER SPRAY, DRY CHEMICAL, ALCOHOL FOAM OR CARBON
DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:AS W/MOST ORG SOLIDS, FIRE IS POSS AT
ELEVATED TEMPS OR BY CNTCT W/IGNIT SOURCE. FINE DUST DISPERSED IN
AIR IN SUFFICIENT CONCS & IN PRESENCE OF IGNIT (SUPDAT)

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT. VENT AREA OF
LEAK/SPILL. CLEAN-UP PERS MAY REQ PROT FROM INHAL OF DUST. SPILLS:
CLEAN UP SPILLS IN MANNER THAT DOES NOT DISPERSE DUST INTO AIR. USE
NON-SPKG TOOLS. PICK UP SPILL FOR RECOVERY/DISP & PLACE IN CLSD
CNTNR.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP IN A TIGHTLY CLOSED CONTAINER,
STORED IN A COOL, DRY, VENTILATED AREA. PROTECT AGAINST PHYSICAL
DAMAGE. ISOLATE FROM INCOMPATIBLE SUBSTANCES.
Other Precautions:DO NOT BREATHE DUST. AVOID CONTACT WITH EYES, SKIN
AND CLOTHING. USE WITH ADEQUATE VENTILATION. CONTACT LENSES SHOULD
NOT BE WORN WHEN WORKING WITH THIS MATERIAL.

Exposure Controls

Respiratory Protection:FOR CONDITIONS OF USE WHERE EXPOSURE TO THE DUST
IS APPARENT, A NIOSH/MSHA APPROVED, DUST/MIST RESPIRATOR MAY BE
WORN. FOR EMERGENCIES, A NIOSH/MSHA APPROVED SELF-CONTAINED
BREATHING APPARATUS MAY BE NECESSARY.
Ventilation:LOC EXHST SYS WHICH CAPTURES THE CONTAMINANT AT ITS SOURCE
IS RECOM TO PVNT DISPERSION OF CONTAMINANT INTO WORKROOM AIR.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH FOUNTAIN &
DELUGE SHOWER . WEAR CLEAN BODY-COVERING CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
EXPLO HAZ: SOURCE IS POTNTL DUST EXPLO HAZ.

Chemical Properties

Boiling Pt:B.P. Text:651F,344C
Melt/Freeze Pt:M.P/F.P Text:>129F,>54C
Spec Gravity:0.811
Solubility in Water:PRACTICALLY INSOL
Appearance and Odor:WHITE CRYSTALS; FAINT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:STABLE UNDER ORDINARY CONDITIONS OF USE
AND STORAGE.
Hazardous Decomposition Products:CARBON DIOXIDE AND CARBON MONOXIDE MAY
FORM WHEN HEATED TO DECOMPOSITION.

Disposal

Waste Disposal Methods:WHATEVER CANNOT BE SAVED FOR RECOVERY MAY BE
BURNED IN AN APPROVED INCINERATOR OR DISPOSED IN AN APPROVED WASTE
FACILITY. ENSURE COMPLIANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.