BZBCP - ACETONE, CODE A3060
- MSDS: BZBCP
- Manufacturer: SPECTRUM CHEMICAL MFG CORP
- Product Name: ACETONE, CODE A3060
- National Stock Number: 6810-01-015-8437
Product Identification
Product ID:ACETONE, CODE A3060
MSDS Date:03/13/1996
FSC:6810
NIIN:01-015-8437
MSDS Number: BZBCP
Responsible Party
GARDENA, CA 90248-2027
US
Emergency Phone: 800-424-9300 / 213-516-8000
Info Phone: 310-516-8000
Preparer: E BRULL
Cage: 63415
Contractor
Telephone: 310-516-9843
Cage: 63415
Ingredients
ACETONE (SARA 313) (CERCLA)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 100.0%
OSHA PEL 1000 PPM
ACGIH TLV: 750PPM/1000STEL;9495
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:LD50 (ORAL RAT) = 5800 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-SLIGHTLY DANGEROUS TO DANGEROUS
IN CASE OF SKIN CONTACT (PERMEATER), OF EYE CONTACT(IRRITANT, OF
INGESTION, OF INHALATION. VERY SLIGHTLY TO SLIGHTLY DANGEROUS IN
CASE OF SKIN CONTACT (IRRITANT, SENSITIZER). MAY IRRITATE EYES &
SKIN ON CONTACT. CHRONIC-TOXIC TO BLOOD, KIDNEYS, LUNGS, NERVOUS
SYSTEM, LIVER.
Explanation of Carcinogenicity:CLASSIFIED A5 BY ACGIH.
Effects of Overexposure:EYES:IRRITATION. SKIN: IRRITATION, PERMEATION.
INHALATION:IRRITATION OF UPPER RESIRATORY TRACT, HEADACHE,
DIZZINESS, COUGHING. INGESTION:IRRITATION OF GI TRACT, NAUSEA,
VOMITING.
Medical Cond Aggravated by Exposure:MFR GAVE NO INFORMATION OF MSDS.
First Aid
First Aid:IF IRRITATION PERSISTS OR IS SEVERE, GET MEDICAL ATTENTION.
EYE:FLUSH W/WATER FOR 15 MIN. SKIN:WASH W/SOAP & WATER. REMOVE
CONTAMINATED CLOTHING & LAUNDER BEFORE REUSE. INHALED:REMOVE FROM
EXPOSURE. A ID OR RESTORE BREATHING AS NEEDED. INGESTED:DO NOT
INDUCE VOMITING. GIVE CONSCIOUS PERSON SEVERAL GLASSES OF MILK OR
WATER & GET IMMEDIATE MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:CC
Flash Point:-4F,-20C
Lower Limits:2.6
Upper Limits:12.8
Extinguishing Media:FLAMMABLE LIQUID,SOLUBLE OR DISPERSED IN WATER. USE
DRY CHEMICAL,CO2,ALCOHOL FOAM,WATER SPRAY.
Fire Fighting Procedures:COOL CONTAINING VESSELS W/WATER FET IN ORDER
TO PREVENT PRESSURE BUILD-UP, AUTOIGNITION OR EXPLOSION.
Unusual Fire/Explosion Hazard:NO SPECIFIC INFORMATION AVAILABLE AT
SPECTRUM REGARDING THE PRODUCT'S RISKS OF EXPLOSION BY ANY SOURCE.
Accidental Release
Spill Release Procedures:SMALL SPILL:DILUTE W/WATER & MOP UP OR ABSOSRB
W/INERT MATERIAL & PLACE IN AN APPROPRIATE WASTE CONTAINER. LARGE
SPILL:ELIMINATE SOURCES OF IGNITION. STOP LEAK IF W/O RISK. ABSORB
ON INERT MATERIAL. P REVENT ENTRY INTO SEWERS, DIKING IF NECESSARY.
Neutralizing Agent:MFR GAVE NO INFORMATION OF MSDS.
Handling
Handling and Storage Precautions:STORE IN SEPARATE SAFETY STORAGE
CABINET OR ROOM. KEEP AWAY FROM HEAT, SOURCES OF IGNITION. KEEP
TIGHTLY CLOSED. STORE IN A COOL WELL VENTILATED AREA.
Other Precautions:GROUND ALL EQUIPMENT CONTAINING MATERIAL. DO NOT
INGEST OR BREATHE GAS, FUMES, VAPOR, SPRAY. WEAR SUITABLE
PROTECTIVE CLOTHING. AVOID CONTACT WSKINOR EYES. IN CASE OF
INSUFFICIENT VENTILATION, WEAR SU ITABLE RESPIRATORY EQUIPMENT.
Exposure Controls
Respiratory Protection:BE SURE TO USE A NIOSH/MSHA APPROVED RESPIRATOR
OR EQUIVALENT.
Ventilation:PROVIDE EXHAUST VENTILATION TO KEEP AIRBORNE CONCENTRATIONS
OF VAPORS BELOW TLV.
Protective Gloves:DISPOSABLE VINYL
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWER PROXIMAL TO
WORK-STATION. LAB COAT. FOR LARGE SPILL:FULL SUIT, BOOTS, SCBA.
Work Hygienic Practices:MFR GAVE NO INFORMATION OF MSDS.
Supplemental Safety and Health
THIS MSDS WRITTEN BY MANUFACTURER. P/N IND A WRITTEN BY VENDOR.
Chemical Properties
HCC:F2
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:133F,56C
Melt/Freeze Pt:M.P/F.P Text:-140F,-95C
Vapor Pres:186 MM
Vapor Density:2
Spec Gravity:0.79
pH:7
Solubility in Water:EASILY SOLUBLE
Appearance and Odor:COLORLESS LIQUID, PUNGENT (STRONG) ODOR
Stability
Stability Indicator/Materials to Avoid:YES
MFR GAVE NO INFORMATION OF MSDS.
Stability Condition to Avoid:MFR GAVE NO INFORMATION OF MSDS.
Hazardous Decomposition Products:THERMAL DECOMPOSITION PRODUCTS ARE
OXIDES OF CARBON (CARBON MONOXIDE, CARBON DIOXIDE).
Conditions to Avoid Polymerization:MFR GAVE NO INFORMATION OF MSDS.
Disposal
Waste Disposal Methods:RECYCLE TO PROCESS IF POSSIBLE. CONSULT YOUR
LOCAL OR REGIONAL AUTHORITIES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.