BZBQS - 1220

Product Identification

Product ID:1220
MSDS Date:07/20/1991
FSC:6850
NIIN:00N063940
MSDS Number: BZBQS

Responsible Party
J AND M LABORATORIES INC
1717 ROWAN
LOUISVILLE, KY 40203
US

Emergency Phone: 800-473-6173

Info Phone: 502-585-3176

Cage: 01VT9

Contractor
J AND M LABORATORIES, INC.
LOUISEVILLE, KY 40203 US

Telephone: 800-473-6173/502-585-3176

Cage: 01VT9

Ingredients

1); (SODIUM BISULFITE) (SARA III)

CAS: 7631-90-5

RTECS: VZ2000000

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


SODIUM COMPOUND; (SODIUM COBALT SULFATE)

OSHA PEL N/K

ACGIH TLV: N/K


METAPHOSPHORIC ACID, HEXASODIUM SALT; (SODIUM

CAS: 10124-56-8

RTECS: OY3675000

OSHA PEL N/K

ACGIH TLV: N/K

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ACRYLATE POLYMER; (SODIUM ACRYLATE POLYMER)

OSHA PEL N/K

ACGIH TLV: N/K


POLYMALEIC ACID

CAS: 26099-09-2

OSHA PEL N/K

ACGIH TLV: N/K


HYDROXYETHYLIDENEDIPHOSPHONIC ACID

OSHA PEL N/K

ACGIH TLV: N/K


POSS INTO APPROP CNTNRS. CLAY, SOIL/COMMERCIALLY

RTECS: 9999999ZZ


NOT READILY BE RECOVERED AS PURE PROD. CONT PERSON(S)

RTECS: 9999999ZZ


SEWER SYS PRIOR TO INTENTIONALLY FLUSHING/PUMPING

RTECS: 9999999ZZ


RECOVER ACT HAZ WASTE. HOWEVER, SPILL/LEAK

RTECS: 9999999ZZ


MFR WILL ACCEPT ANY

RTECS: 9999999ZZ


PLACED THEREIN, AND ASSUMING THE DRUM IS IN

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS MATERIAL IS NOT CONSIDERED TO BE
A CARCINOGEN BY THE NATIONAL TOXICOLOGY PROGRAM, THE INTERNATIONAL
AGENCY FOR RESEARCH ON CANCER, OR THE OCCUPATIONAL SAFETY AND
HEALTH ADMINISTRATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN:WASH EXPOSED AREA W/PLENTY OF SOAP & WATER. REPEAT
WASHING. RINSE EXPOSED AREA FOR @ LST 15 MIN. CONSULT HLTH CARE
PROFESSIONAL. IF CLTHG COMES IN CONT W/PROD, REMOVE IMMED & LAUNDER
BEFORE REUSE . EYE:FLUSH IMMED W/COPIOUS AMTS OF TAPWATER/NORMAL
SALINE FOR @ LST 15 MIN. TAKE EXPOSED INDIVIDUAL TO HLTH CARE
PROFESSIONAL. INHAL:IF PERSON EXPER NAUS, HDCH/DIZZ, IMMED MOVE TO
FRESH AIR.(SUPDAT)

Fire Fighting

Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:WATER FOG, CO*2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:INITIALLY MIN AREA AFFECTED. BLOCK ANY POTNTL
RTES TO WATER SYS. ASSESS IMPACT ON CONTAM ENVIRONS & MIN ANY
ADVERSE EFTS. CONT MFR REPRESENTATIVE IMMED. DETERM IF FED, STATE
&/OR LOC RELS NOTIFICATION IS REQ. RECOVER AS MUCH OF PURE PROD AS
(ING 7)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID AREAS OF EXTREME HEAT OR COLD.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NONE REQUIRED.
Ventilation:GENERAL (MECHANICAL) ROOM VENTILATION IS EXPECTED TO BE
SATISFACTORY.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER . WEAR IMPERVIOUS APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:11.5-12.5. FIRST AID PROC:IF DFCLTY IN BRTHG/IS CYANOTIC ADMIN OXYG
IF AVAIL. CALL MD. INGEST:DO NOT INDUCE VOMIT. RINSE MOUTH
W/COPIOUS AMTS OF WATER/MILK FIRST. SLOWLY DILUTE STOM CONTENTS
W/6-8 OZS OF WATER. IN CASES WHERE PERSON IS SEMICONSCIOUS,
COMATOSE/CONVULSING, DO NOT GIVE FLUIDS BY MOUTH. CONT MD IMMED.

Chemical Properties

Spec Gravity:1.11-1.17
pH:SUPDAT
Solubility in Water:MISCIBLE
Appearance and Odor:CLEAR, EMBER LIQUID WITH A MODERATE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:CONTAMINATION OF ANY KIND.
Hazardous Decomposition Products:BURNING MAY LIBERATE CARBON MONOXIDE,
CO*2 HYDROGEN GAS, SULFUR OXIDES, NITROGEN OXIDES.

Disposal

Waste Disposal Methods:FOLLOW ALL FED, STATE & LOC REGS GOVERNING DISP
OF WASTE MATLS. DETERM IF WASTE CNTNING PROD CAN BE HNDLD BY AVAIL
INDUST EFFLUENT SYS/OTHER ON-SITE WASTE MANAGEMENT. PROD IS NOT
SPECIFICALLY LISTED I N 40 CFR 261 AS RESOURCE CONSERVATION &(ING
10)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.