BZBRB - ACCUFLO DM68

  • MSDS: BZBRB
  • Manufacturer: PETRO CANADA
  • Product Name: ACCUFLO DM68
  • National Stock Number: 9150-00N064068
Product Identification

Product ID:ACCUFLO DM68
MSDS Date:01/10/1995
FSC:9150
NIIN:00N064068
MSDS Number: BZBRB

Responsible Party
PETRO-CANADA
PETRO-CANADA CENTRE
CALGARY ALBERTA
US

Emergency Phone: 613-996-6666

Info Phone: 403-296-3000

Preparer: MCBRIDE

Cage: JO159

Contractor
PETRO-CANADA INC
2844 CALGARY, AB CA

Telephone: 403-296-3000

Cage: 38766

Ingredients

SEVERELY HYDROTREATED HYDROCARBON OIL (ALSO CAS #72623-85-9

CAS: 72623-87-1

Fraction By Weight: 100%

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: N/K


HIGHLY REFINED BASE OIL

CAS: 72623-85-9

OSHA PEL N/K

ACGIH TLV: N/K


MINERAL OIL

CAS: 72623-83-7

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:LD50 (ORAL RAT): > 5000 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: LOW TOXICITY ON INGESTION. HAS
LAXATIVE EFFECT. MILDLY IRRITATING TO EYES. CHRONIC: PROLONGED OR
REPEATED CONTACT WITH SKIN MAY CAUSE MILD IRRITATION AND POSSIBLY
DERMATITIS. INHALATION OF OIL MISTS/VAPORS FROM HOT OIL MAY CAUSE
IRRITATION OF THE UPPER RESPIRATORY TRACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: CHECK FOR & REMOVE ANY CONT LENSES. IMMED FLUSH
W/RUNNING WATER FOR AT LEAST 15 MIN, KEEPING EYELIDS OPEN. DO NOT
USE EYE OINTMENT. SEEK MED ATTN IF IRRIT PERSISTS. SKIN: REMOVE
CONTAM CLTHG. LA UNDER BEFORE REUSE. GET MED ATTN IF REDNESS/IRRIT
OCCURS. INHAL: EVACUATE TO SAFE AREA AS SOON AS POSS. ALLOW TO REST
IN WELL-VENT AREA. IF NOT BRTHG, PERFORM MOUTH-TO-MOUTH
RESUSCITATION. MD ASSESSME NT MANDATORY. INGEST: DO NOT INDUCE
VOMIT, DANGER OF ASPIR LIQ INTO LUNGS. GET IMMED MED ATTN.

Fire Fighting

Flash Point Method:OC
Flash Point:>349F,>176C
Extinguishing Media:SMALL FIRES: USE DRY CHEMICALS, FOAM OR CARBON
DIOXIDE. LARGE FIRES: USE WATER SPRAY, FOG OR FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. COOL CONTAINING VESSELS W/WATER SPRAY TO PVNT PRESS BUILD-UP,
AUTOIGNIT/EXPLO. SHUT OFF FUEL TO FIRE IF POSS TO DO SO W/OUT HAZ.
WATER/FOAM MAY CA USE FROTHING. FOR SML OUTDOOR FIRES, WHICH MAY BE
EASILY EXTING W/PORTABLE FIRE EXTING, USE OF SCBA MAY NOT
BE(SUPDAT)
Unusual Fire/Explosion Hazard:DO NOT WELD, HEAT, OR DRILL EMPTY
CONTAINER.

Accidental Release

Spill Release Procedures:AVOID CONTACT. ABSORB WITH AN INERT MATERIAL
AND PLACE IN AN APPROPRIATE WASTE DISPOSAL CONTAINER. CONTAIN
SPILL. DO NOT FLUSH TO SEWER. CHECK WITH APPLICABLE JURISDICTIONS
FOR SPECIFIC DISPOSAL REQUI REMENTS OF MATERIAL AND EMPTY
CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID INHAL & CONT W/SKIN & EYES. IN
CASE OF INSUFFICIENT VENT, WEAR SUITABLE RESP EQUIP. PRACTICE GOOD
PERS HYGIENE.
Other Precautions:COMBUST MATLS SHOULD BE STORED AWAY FROM EXTREME HEAT
& STRONG OXIDIZING AGENTS. STORE IN TIGHTLY CLSD CONTRS IN COOL,
DRY, ISOLATED & WELL-VENT AREA. DO NOT REUSE EMPTY CONTRS W/OUT
COMMERCIAL CLEANI NG/RECONDITIONING.

Exposure Controls

Respiratory Protection:RESPIRATOR NORMALLY NOT NECESSARY. IF MIST
GENERATED BY HEATING, SPRAYING, ETC, WEAR NIOSH/MSHA APPROVED
ORGANIC VAPOR RESPIRATOR SUITABLE FOR OIL MIST IN AREAS WITH
SUFFICIENT OXYGEN.
Ventilation:FOR NORM OUTDOOR APPLICATION, SPECIAL VENT NOT NEC. FOR
INDOOR/CONFINED SPACES, PROVIDE LOC EXHAUST VENT/OTHER ENGINEER
CONTROLS, TO KEEP AIRBORNE (SUPDAT)
Protective Gloves:FOR DIRECT CONTACT OF MORE THAN 2 HRS, VITON/NITRILE
GLOVES ARE NEEDED,(SUPDAT)
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING.
LAUNDER WORK CLOTHES FREQUENTLY. DISCARD SATURATED LEATHER GOODS.
Supplemental Safety and Health
FIRE FIGHT PROC: REQUIRED. AVOID FLUSHING HYDROCARBON INTO SEWERS,
STREAMS/OTHER BODIES OF WATER. VENT: CONCENTRATION BELOW THE TLV.
MAKE-UP AIR SHOULD ALWAYS BE SUPPLIED TO BALANCE AIR REMOVED BY EXH
AUST VENTILATION. PROT GLOVES: OTHERWISE PVC GLOVES MAY BE USED.

Chemical Properties

Boiling Pt:B.P. Text:>714F,>379C
Vapor Pres:<0.0075 @ 100F
Spec Gravity:0.88-0.89 @15C (H*2O=1)
Solubility in Water:INSOL IN COLD WATER
Appearance and Odor:CLEAR, BRIGHT COLORED LIQUID (FLUID), WITH SLIGHT
HYDROCARBON ODOR

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS, INCLUDING PEROXIDES,
CHLORINE AND STRONG ACIDS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT, FORMATION OF OIL
MIST.
Hazardous Decomposition Products:SMOKE ON COMBUSTION.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.