Product ID:22W-E008 WHITE HI-PERF ACRYLIC ENAMEL
MSDS Date:11/16/1990
FSC:8010
NIIN:00F047891
MSDS Number: BZDNV

AEXCEL CORPORATION

7373 PRODUCTION DR
MENTOR, OH 44061-5000
US

Emergency Phone: 216-974-3800

Info Phone: 216-974-3800

Cage: AEXCE

AEXCEL CORPORATION (WAS DESANTIS COATINGS,INC)

MENTOR, OH 44061-0780 US

Telephone: 216-974-3800

Cage: AEXCE

DIIOSONONYL PHTHALATE; 1,2-BENZENEDICARBOXYLIC

CAS: 28553-12-0

Fraction By Weight: 1.88%

TOLUENE (IARC CARC- GROUP 3) *96-1*

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 35.55%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SEVERE IRRITATION. SKIN:
ABSORPTION MAY POTENTIALLY CONTRIBUTE TO OVERALL EXPOSURE TO
TOLUENE. INHALATION: EXCESSIVE SOLVENT VAPOR LEVELS OVER LONG
PERIODS OF TIME IN AIR MAY CAUSE NERVE DAMAGE. REPEATED &
PROLONGED OVEREXPOSURE TO SOLVENTS MAY CAUSE PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHES, DIZZINESS, NAUSEA.

First Aid:EYES: FLUSH THOROUGHLY W/WATER FOR 15 MINS. SKIN: WASH
EXPOSED AREAS W/SOAP & WATER. INGESTION: DON'T INDUCE VOMITING.
KEEP WARM & QUIET. ASPIRATION HAZARD. INHALATION: REMOVE TO FRESH
AIR. OBTAIN MED ICAL ATTENTION IN ALL CASES.

Flash Point Method:TCC
Flash Point:45F
Lower Limits:1.2
Upper Limits:7
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG/SPRAY.
Fire Fighting Procedures:WATER STREAMS AREN'T ALWAYS EFFECTIVE. SOLID
HOSE STREAMS TEND TO SCATTER LIQUID & SPREAD FIRE. WATER
FOAMS/SPRAYS/FOG NOZZLES COOL BURNING SURFACE/EXCLUDE AIR.
Unusual Fire/Explosion Hazard:FLAMMABLE VAPORS MAY FORM EXPLOSIVE
MIXTURES W/AIR.

Spill Release Procedures:LARGE: COLLECT IN A RETAINING AREA/CONTAINER.
TRANSFER TO A CLOSED CONTAINER. AVOID EXPOSURE TO IGNITION SOURCES.
AVOID HOT METAL SURFACES.

Handling and Storage Precautions:KEEP AWAY FROM IGNITION SOURCES. USE
ONLY W/ADEQUATE VENTILATION. STORE UPRIGHT & SECURE IN A COOL, DRY,
APPROVED AREA (40-80F).
Other Precautions:CLEAN ALL CONTAINER OPENINGS/KEEP TIGHTLY SEALED.
AVOID INHALING DRY OVERSPRAY/SOLVENT VAPORS. AVOID
PROLONGED/REPEATED SKIN CONTACT. EMPTY CONTAINERS RETAIN HAZARDOUS
RESIDUE/EXPLOSIVE VAPORS. DON'T CUT/PUNCTURE/WELD ON/NEAR
CONTAINER.

Respiratory Protection:WEAR AN APPROPRIATE, PROPERLY FITTED NIOSH/MSHA
APPROVED RESPIRATOR DURING SPRAYING APPLICATION TO PROTECT AGAINST
OVERSPRAY. WEAR A SCBA IF SOLVENT CONCENTRATION LEVELS EXCEED SAFE
EXPOSURE LEVELS.
Ventilation:ADEQUATE WHEN SPRAYING/MIXING & EXHAUST W/PROPER AIRFLOW IS
ALWAY RECOMMENDED. USE EXPLOSION-PROOF ELECTRICAL EQUIPMENT.
Protective Gloves:RECOMMENDED
Eye Protection:CLOSE FITTING SAFETY GOGGLES
Other Protective Equipment:LONG SLEEVES, HATS, FACE SHIELDS, PROTECTIVE
CREAM MAY HELP BUT AREN'T AS PROTECTIVE AS GLOVES
Supplemental Safety and Health

Boiling Pt:B.P. Text:230-238F
Vapor Density:>1
Evaporation Rate & Reference:(N-BU AC = 1): 1.5
Appearance and Odor:HEAVY WHITE LIQUID
Percent Volatiles by Volume:54.9

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:HEAT, SPARKS, FIRE/OPEN FLAME & OTHER
IGNITION SOURCES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION: CO.

Waste Disposal Methods:MATERIAL SHOULD BE CONSIDERED A HAZARDOUS WASTE
& DISPOSED OF IAW/FEDERAL, STATE & LOCAL REGULATIONS. UN1263

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.