BZJPQ - 890 0359 RPJ FIXER & REPLNSHR, PART B, TO MAKE 4 LITERS
- MSDS: BZJPQ
- Manufacturer: EASTMAN KODAK COMPANY
- Product Name: 890 0359 RPJ FIXER & REPLNSHR, PART B, TO MAKE 4 LITERS
- National Stock Number: 6750-00D004485
Product Identification
Product ID:890 0359 RPJ FIXER & REPLNSHR, PART B, TO MAKE 4 LITERS
MSDS Date:08/09/1995
FSC:6750
NIIN:00D004485
Kit Part:Y
MSDS Number: BZJPQ
Responsible Party
ROCHESTER, NY 14650
US
Emergency Phone: 716-722-5151
Info Phone: 800- 242-2424
Cage: 19139
Contractor
Telephone: 716-722-5151/(800) 242-2424
Cage: 19139
Ingredients
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 75-80%
ALUMINUM SULFATE
CAS: 10043-01-3
RTECS: BD1700000
Fraction By Weight: 20-25%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9495
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:EXPECTED TO BE A LOW HAZARD FOR
RECOMMENDED HANDLING. EYES:NO SPECIFIC HAZARD KNOWN. MAY CAUSE
TRANSIENT IRRITATION. SKIN:LOW HAZARD FOR RECOMMENDED HANLDING.
INGEST:EXPECTED TO BE LOW INGESTIN HAZARD.
Explanation of Carcinogenicity:PER MSDS:CARCINOGENICITY
CLASSIFICATION:IARC/ACGIH/NTP/OSHA:NONE.
Effects of Overexposure:TRANSIENT EYE IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:IF SYMPTOMATIC MOVE TO FRESH AIR. GET MED ATTN IF
SYMPTONS PERSIST. EYES:ANY MATL THAT CONTACTS EYE SHOULD BE WASHED
OUT IMMED W/WATER. GET MED ATTN. SKIN:WASH W/SOAP & WATER. GET MED
ATTN IF SY MPTOMS OCCUR. INGEST:DRINK 1-2 GLASSES OF WATER. SEEK
MED ATTN.
Fire Fighting
Flash Point:NONE,NON-COMBUST
Extinguishing Media:USE APPROPRIATE AGENT FOR ADJACENT FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING. FIRE OR EXCESSIVE HEAT MAY PRODUCE HAZARDOUS
DECOMPOSITION PRODUCTS.
Unusual Fire/Explosion Hazard:NONE. NON-COMBUSTIBLE LIQUID.
Accidental Release
Spill Release Procedures:FLUSH TO SEWER W/LG AMTS OF WATER. OTHERWISE
ABSORB W/VERMICULITE OR OTHER INERT MATERIAL, THEN PLACE IN
CONTAINER FOR CHEMICAL WASTE. CLEAN SURFACE THOROUGHLY TO REMOVE
RESIDUAL CONTAMINATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE W/ADEQUATE VENTILATION.KEEP CNTNR
CLOSED.
Other Precautions:MATL MOD ACIDIC AQU SOLN.PROPERTIES:NO BIOCHEM OXY
DEMAND;NO POT TO CAUSE OXY DEPLETION IN AQU SYS;LOW POT TO AFFECT
2ND WASTE TREATMENT MICROBIAL METABOLISM;MOD POT TO AFFECT GERM
&/OR EARLY GROWTH O F SOME PLANTS;LOW POT TO BIOCONCEN(SUPP)
Exposure Controls
Respiratory Protection:NONE SHOULD BE NEEDED.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 10 AIR CHANGES/HR)
SHOULD BE USED. VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS, GOGGLES.
Other Protective Equipment:EYEBATH, WASHING FACILITIES, SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS WELL AFT HNDLG.FOLLOW GOOD
INDUSTRIAL HYGIENE PRACTICES TO MIN EYE/SKIN CONTACT.
Supplemental Safety and Health
OTHER PRECAUT:WHEN DIL W/LG AMT OF WATER MATL RELEASED DIR/INDIR INTO
ENVIRO NOT EXPECTED TO HAVE SIGN IMPACT. SAME NSN PNIND:A FOR PART
A, PNIND:W FOR WORK SOLN.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:18MM @20C
Vapor Density:0.6
Spec Gravity:1.30
pH:4.6
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID, COLORLESS, ODORLESS.
Percent Volatiles by Volume:75-80
Stability
Stability Indicator/Materials to Avoid:YES
NONE W/COMMON MATERIALS & CONTAMINANTS W/WHICH MATERIAL MAY REASONABLY
COME INTO CONTACT.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:SULFUR DIOXIDE. HAZ COMBUST PROD:NONE
(NON-COMBUSTIBLE).
Disposal
Waste Disposal Methods:DISCHARGE/TREATMENT/DISPOSAL MAY BE SUBJECT TO
NATIONAL/STATE/LOCAL LAWS. FLUSH TO SEWER W/LG AMTS OF WATER. CHEM
SUBJ TO REPORTING REQMTS SEC 313 TITLE III SARA/40CFR PART
372:NONE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.