BZMBG - PREMIUM ACETONE ACCELERATOR, FG09428
- MSDS: BZMBG
- Manufacturer: PACER TECHNOLOGY
- Product Name: PREMIUM ACETONE ACCELERATOR, FG09428
- National Stock Number: 6810-00N064668
Product Identification
Product ID:PREMIUM ACETONE ACCELERATOR, FG09428
MSDS Date:12/08/1993
FSC:6810
NIIN:00N064668
MSDS Number: BZMBG
Responsible Party
RANCHO CUCAMONGA, CA 91730
US
Emergency Phone: 202-483-7616;800-424-9300(CHEMTREC)
Info Phone: 909-987-0550
Cage: 62530
Contractor
Telephone: 909-987-0550
Cage: 62530
Ingredients
ACETONE (SARA 313) (CERCLA)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 80-100%
OSHA PEL 1000 PPM
ACGIH TLV: 750 PPM;1000 STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
P-TOLUIDINE, N,N-DIMETHYL-; (ALKYL TOLUIDINES)
CAS: 99-97-8
RTECS: XU5803000
Fraction By Weight: 1-20%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:LD50:(ORAL) 7.4 G/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:IRRITATION TO EYES, NOSE &
THROAT MAY CAUSE HEADACHES, DIZZINESS, NAUSEA & UNCONSCIOUSNESS.
INHALATION:VAPORS CAN BE IRRITATING & DEADEN SENSE OF SMELL AFTER
SHORT TIME EXPOSURE, W/PROLONGED EXP OSURE CAUSING IRRITATION TO
EYES, NOSE & THROAT. EYE/SKIN CONTACT:IRRITATION UPON DIRECT
CONTACT. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CHRONIC:POSSIBLE AFFECT TO LIVER &
KIDNEYS.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN DISORDERS.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. EYES:IMMEDIATELY FLUSH W/WATER FOR
AT LEAST 15 MINUTES. GET MEDICAL ATTENTION. SKIN:REMOVE
CONTAMINATED CLOTHING. WASH AFFECTED AREA W/WATER. INGEST:WASH OUT
MOUTH W/WATER P ROVIDED PERSON IS CONSCIOUS. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:TCC
Flash Point:-15F,-26C
Lower Limits:2.6%
Upper Limits:12.8%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, "ALCOHOL" FOAM, WATER
SPRAY OR FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:TREAT AS AN EXTREMELY FLAMMABLE LIQUID.
Accidental Release
Spill Release Procedures:VENTILATE AREA & REMOVE SOURCES OF IGNIT.
PREVENT SKIN CONTACT & BRTHG VAPORS. CONFINE & REMOVE W/INERT
ABSORBENT. DISPOSE I/A/W APPLICABLE FEDERAL, STATE & LOCAL
REGULATIONS. (DO NOT INCINERATE IN CL OSED CONTAINERS).
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:ACETONE IS VERY VOLATILE & EXTREMELY
FLAMM LIQ. KEEP AWAY FROM ANY SOURCE OF IGNIT SUCH AS HEAT, SPKS &
OPEN FLAMES. AVOID DIRECT CONT W/EYES OR SKIN.
Other Precautions:GROUND ALL CNTNRS WHEN TRANSFERRING LIQ, STORE
TIGHTLY CLOSED CNTNRS IN A COOL, WELL VENTILATED AREA. DO NOT
EAT/SMOKE IN AREA WHERE THIS PROD IS HNDLD. EMPTIED CNTNRS MAY
CONTAIN PROD RESIDUES & SHOU LD BE DISP OF AS CHEM WASTE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR CANISTER IN
ABSENCE OF PROPER VENTILATED EQUIPMENT.
Ventilation:LOCAL EXHAUST: GOOD. MECHANICAL (GENERAL): AS NEEDED.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . PROT CLTHG TO AVOID DIRECT CONT. WEAR
(SUPDAT)
Work Hygienic Practices:WASH HANDS W/SOAP & WATER & LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
OTHER PROT EQUIP:PROTECTIVE SAFETY EQUIPMENT AS NECESSARY TO MINIMIZE
CONTACT.
Chemical Properties
Boiling Pt:B.P. Text:133F,56C
Melt/Freeze Pt:M.P/F.P Text:-139F,-95C
Vapor Pres:184 @ 20C
Vapor Density:2
Spec Gravity:0.8 (H*2O=1)
Evaporation Rate & Reference:5 (BUTYL ACETATE=1)
Solubility in Water:85% BY WEIGHT
Appearance and Odor:WATER-WHITE TO STRAW COLORED, TRANSPARENT LIQUID
W/KETONE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NITRIC ACID PLUS ACETIC ACID & NITRIC ACID PLUS SULFURIC ACID.
Stability Condition to Avoid:STORAGE IN OPEN CONTAINERS, EXPOSURE TO
HEAT OR OPEN FLAME.
Hazardous Decomposition Products:NORMALLY NONE, HOWEVER W/INCOMPLETE
COMBUSTION CARBON MONOXIDE CAN FORM.
Conditions to Avoid Polymerization:AVOID EXPOSURE TO HEAT OR OPEN
FLAME.
Disposal
Waste Disposal Methods:CRA-EPA HAZ WASTE NUMBER U002. MUST BE DISPOSED
OF EITHER BY BURIAL AT A CHEMICAL LANDFILL OR CONTROLLED BURNING BY
A LICENSED CHEMICAL WASTE FACILITY I/A/W CURRENT LOCAL, STATE &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.