BZMPR - T-204, 12759

  • MSDS: BZMPR
  • Manufacturer: ALCO PRODUCTS INC
  • Product Name: T-204, 12759
  • National Stock Number: 7930-00N066449
Product Identification

Product ID:T-204, 12759
MSDS Date:11/30/1988
FSC:7930
NIIN:00N066449
MSDS Number: BZMPR

Responsible Party
ALCO PRODUCTS INC
13126 SATICOY ST
NORTH HOLLYWOOD, CA 91605
US

Emergency Phone: 714-634-5988;800-424-9300(CHEMTREC)

Info Phone: 818-764-7700

Cage: 0AXK7

Contractor
ALCO PRODUCTS INC
NORTH HOLLYWOOD, CA 91605 US

Telephone: 818-764-7700

Cage: 0AXK7

Ingredients

SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (ALIPHATIC

CAS: 64742-88-7

Fraction By Weight: 100%

OSHA PEL 300 PPM (MFR)

ACGIH TLV: 300 PPM (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:CONTACT OF PRODUCT CAN CAUSE
SEVERE IRRITATION AND/OR DEFATTING DUE TO THE REMOVAL OF SKINS
NATURAL OILS. EYES:CONTACT OF PRODUCT CAN CAUSE SEVERE IRRITATION
AND/OR DEHYDRATION OF THE EYES AND EY ELIDS. INHALATION:FUMES FROM
PRODUCT CAN CAUSE NARCOTIC EFFECTS, NAUSEA, DIZZINESS, DOUBLE
VISION, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:HDCHS & VOMITING. OTHER SYMPTOMS
INCLUDE POSSIBLE IRRIT & DEFAT OF NOSE, NASAL PASSAGES & LUNGS.
INGEST:WHEN CONC SOLN OF PROD IS SWALLOWED; IT CAN CAUSE SEV IRRIT
&/OR DEFAT OF MOUTH, ESOPH AGUS, STOM & INTESTINAL TRACT. OTHER
SYMPS OF INGEST INCLUDE NARCOTIC EFTS, NAUS, DIZZ, DOUBLE VISION,
HDCHS & VOMIT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN:FLUSH AREA EXPOSED FOR 15 MIN W/LUKE WARM WATER. IF
DEFAT OCCURS, SKIN LOTION IS ADVISED. CONSULT MD IMMED. EYES:FLUSH
AT LST 15 MIN W/COOL WATER. CONSULT MD IMMED. INHAL:REMOVE TO CLEAN
ATM & AD MIN OXYG IF IT IS AVAIL. CONSULT MD IMMED. INGEST:INDUCE
VOMIT; HAVE PATIENT DRINK LG AMTS OF MILK/WATER. CONSULT MD IMMED.

Fire Fighting

Flash Point:122F,50C
Extinguishing Media:SAND, DRY CHEMICAL, DRY FOAM, WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . THIS MATERIAL READILY IGNITES IF NEAR HIGH
TEMPERATURES SOURCE OR OPEN FLAME.
Unusual Fire/Explosion Hazard:IF THIS MATERIAL IS EXPOSED TO A HIGH
HEAT SOURCE OR OPEN FLAME THERE IS THE DANGER OF AN EXPLOSION.

Accidental Release

Spill Release Procedures:SM SPILL:FLUSH AREA W/WATER TO INDUST SEWER
LINE. LG SPILL:CNTN SPILL W/DIKES OF ABSORB MATLS SUCH AS CLAY,
SAND OR VERMICULITE. COLLECT MATERIAL AND DISPOSE OF MATERIAL IN A
CERTIFIED CLASS ONE DISPO SAL FACILITY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP THIS MATERIAL AWAY FROM HIGH HEAT
AND OBSERVE PROEPR HOUSEKEEPING PROCEDURES. DO NOT MIX CHEMICALS
UNLESS INSTRUCTED BY QUALIFIED PERSONNEL.
Other Precautions:CHEMICALS CAN BE HAZARDOUS IF NOT RESPECTED. THE USE
OF PROPER EQUIPMENT AND PROCEDURES FOR HANDLING CHEMICALS ARE NOT
ONLY OF BENEFIT FOR THEIR OBVIOUS USES, BUT CAN REDUCE POSSIBILITY
OF SERIOUS INJ URY AND TIME LOSS ACCIDENTS.

Exposure Controls

Respiratory Protection:WHEN USING THIS MATERIAL IN CONFINED SPACE, USE
OF NIOSH/MSHA APPROVED PERSONAL RESPIRATORY PROTECTION IS
RECOMMENDED.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
WHEN HNDLG CHEMS IN 55 GALLON DRUMS IT IS REC THAT STEEL TOED (SUP
DAT)
Work Hygienic Practices:KEEP THIS MATERIAL AWAY FROM HIGH HEAT AND
OBSERVE PROPER HOUSEKEEPING PROCEDURES.
Supplemental Safety and Health
OTHER PROT EQUIP:RUBBER BOOTS AND A SPLASH APRON BE WORN.

Chemical Properties

Boiling Pt:B.P. Text:352F,178C
Vapor Density:4.69
Spec Gravity:0.84 (H*2O=1)
Evaporation Rate & Reference:0.5 (H*2O=1)
Solubility in Water:NOT SOLUBLE
Appearance and Odor:CLEAR, RED LIQUID WITH A CITRUS ODOR.
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:ALL HAZARDOUS MATERIALS MUST BE SOLIDIFIED AND
DISPOSED OF IN AN EPA APPROVED CLASS ONE FACILITY. WHEN DISPOSING
OF CHEMICALS, CONTACT LOCAL, STATE AND FEDERAL ENVIRONMENTAL
AGENCIES TO FULLY UNDERSTA ND THE NEC REGS GOVERNING DISP OF CHEM
WASTES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.