Product ID:835 0167, KODAK FLEXICOLOR STABILIZER & REPLENISHER LF, CON
MSDS Date:01/04/1995
FSC:6750
NIIN:00D004518
Kit Part:Y
MSDS Number: BZMYW

EASTMAN KODAK COMPANY

343 STATE STREET
ROCHESTER, NY 14650
US

Emergency Phone: 716-722-5151

Info Phone: 800- 242-2424

Cage: 19139

EASTMAN KODAK CO US CUSTOMER SERVICE/GOVERNMENT SALES

ROCHESTER, NY 14650-3129 US

Telephone: 800-828-6203

Cage: 5K871

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 70-75%

HEXAMINE

CAS: 100-97-0

RTECS: MN4725000

Fraction By Weight: 25-30%

SODIUM DODECYLBENZENE SULFONATE (CERCLA)

CAS: 25155-30-0

RTECS: DB6825000

Fraction By Weight: 1-5%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

DIPROPYLENE GLYCOL

CAS: 110-98-5

RTECS: UB8785000

Fraction By Weight: 1-5%

NONIONIC SURFACTANTS

Fraction By Weight: 1-5%

1,2-BENZISOTHIAZOL-3(2H)-ONE

CAS: 2634-33-5

RTECS: DE4620000

Fraction By Weight: <1%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: EXPECTED TO BE A LOW
HAZARD FOR RECOMMENDED HANDLING. EYES: CAUSES IRRITATION. SKIN:
CAUSES IRRITATION. MAY CAUSE ALLERGIC SKIN REACTION. INGESTION:
HARMFUL IF SWALLOWED. MAY CAUSE IRRITA TION OF THE GASTROINTESTINAL
TRACT.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:UNDER CAIDIC CONDITIONS, THIS
PRODUCT MAY RELEASE FORMALDEHYDE. EXPOSURE TO FORMALDEHYDE MAY
CAUSE RESPIRATORY SENSITIZATION IN SOME INDIVIDUALS OR AGGRAVTE
PRE-EXISTING ASTHAMATIC CONDITIONS.

First Aid:INHALATION-IF SYMPTOMATIC MOVE TO FRESH AIR. GET MEDICAL
ATTENTION IF SYMPTOMA OCCUR. EYES-IMMEDIATELY FLUSH EYES WITH
PLENTY OF WATER FOR 15 MIN. GET MEDICAL ATTENTION. SKIN-WASH SKIN
WITH PLENTY OF WATER. REMOVE SOILED CLOTHES/SHOES. GETMEDICAL
ATTENTION. INGESTION-DO NOT INDUCE VOMITING. GIVE VICTIM A GLASS OF
WATER. CALL A PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY.

Flash Point:NONE
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL
FOAM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING. FIRE OR EXCESSIVE HEAT MAY PRODUCE HAZARDOUS
DECOMPOSITION PRODUCTS.
Unusual Fire/Explosion Hazard:FIRE OR HIGH TEMPERATURE MAY CAUSE
DECOMPOSITION.

Spill Release Procedures:FLUSH TO SEWER WITH LARGE AMOUNTS OF WATER.
OTHERWISE, ABSORB SPILL WITH VERMICULITE OR OTHER INERT MATERIAL,
THEN PLACE IN A CONTAINER FOR CHEMICAL WASTE. CLEAN SURFACE
THOROUGHLY TO REMOVE RESIDUAL CONTAMINATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINER CLOSED. KEEP AWAY FROM
INCOMPATIBLE SUBSTANCES. AVOID CONTACT WITH EYES, SKIN AND
CLOTHING.
Other Precautions:USE WITH ADEUATE VENTILATION. WASH THOROUGHLY AFTER
HANDLING. THE ROUTINE USE OF A NON ALKALINE TYPE OF HAND CLEANER
AND REGULAR CLEANING OF WORKING SURFACES, GLOVES, ETC., WILL HELP
MINIMIZE THE POSS IBILITY OF A SKIN REACTION.

Respiratory Protection:IF FORMALDEHYDE IS EMITTED AT LEVELS REQUIRING
RESPIRATORY PROTECTION, THE FOLLOWING RESPIRATOR TYPE SHOULD BE
WORN: FULL FACEPIECE WITH CARTRIDGES OR CANISTERS SPECIFICALLY
APPROVED BY NIOSH FOR PROT ECTION AGAINST FORMALDEHYDE OR TYPE C.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 10 AIR CHANGES/HR)S
HOULD BE USED. VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS
Protective Gloves:NEOPRENE, RUBBER, NITRILE RUBBER GLOVES.
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS, GOGGLE
Other Protective Equipment:WEAR PROTECTIVE CLOTHING APPROPIATE FOR RISK
OF EXPOSURE. EYE BATH, SAFETY SHOWER, WASHING FACILITIES.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANLDING.
Supplemental Safety and Health
KEEP OUT OF REACH OF CHILDREN.

HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:18 MMHG
Vapor Density:0.6
Spec Gravity:1.06
pH:7.7
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID; AMBER, SLIGHT AMINE ODOR.
Percent Volatiles by Volume:70-75

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS.
Stability Condition to Avoid:STABLE; HOWEVER, MATERIAL CAN DECOMPOSE
ABOVE 295C. AVOID TEMPERATURES ABOVE 195C.
Hazardous Decomposition Products:AMMONIA, FORMALDEHYDE; CARBON DIOXIDE,
CARBON MONOXIDE, OXIDES OF NITROGEN, OXIDES OF SULFUR.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISCHARGE, TREATMENT, OR DISPOSAL MAY BE SUBJECT
TO NATIONAL, STATE, OR LOCAL LAWS. FLUSH TO SEWER WITH LARGE
AMOUNTS OF WATER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.