BZQHX - SPEEDPRO FLAT WALL PAINTS, 14-A (041290M), 14-110
- MSDS: BZQHX
- Manufacturer: PPG INDUSTRIES INC
- Product Name: SPEEDPRO FLAT WALL PAINTS, 14-A (041290M), 14-110
- National Stock Number: 8010-00N065492
Product Identification
Product ID:SPEEDPRO FLAT WALL PAINTS, 14-A (041290M), 14-110
MSDS Date:08/04/1990
FSC:8010
NIIN:00N065492
MSDS Number: BZQHX
Responsible Party
PITTSBURGH, PA 15238
US
Emergency Phone: 304-843-1300
Info Phone: 412-492-5555
Cage: 47695
Contractor
Telephone: 1-800-245-2974 (CAL HYPO)
Cage: 47695
Ingredients
CLAY (KAOLIN); (ALUMINUM SILICATE)
CAS: 1332-58-7
RTECS: GF1670500
Fraction By Weight: 10-15%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST
SILICA, CRYSTALLINE - FUSED; (SILICA, AMORPHOUS-FUSED)
CAS: 60676-86-0
RTECS: VV7328000
Fraction By Weight: 2-5%
OSHA PEL 0.1 MG/M3 (MFR)
ACGIH TLV: 0.1 MG/M3 RDUST
SILICA GEL; (SILICA, AMORPHOUS)
CAS: 63231-67-4
RTECS: VV7340000
Fraction By Weight: 5-10%
OSHA PEL 80 MG/M3
ACGIH TLV: 10 MG/M3
CALCIUM CARBONATE
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 15-20%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 10-15%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
SILICA, CRYSTALLINE - QUARTZ; (QUARTZ)
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 2-5%
OSHA PEL 0.1 MG/M3 (MFR)
ACGIH TLV: 0.1 MG/M3 RDUST
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 55-60%
OSHA PEL N/K
ACGIH TLV: N/K
FILM FORMERS, RESINS, AND ADDITIVES
Fraction By Weight: 5-10%
OSHA PEL N/K
ACGIH TLV: N/K
SILICA, CRYSTALLINE - CRISTOBALITE (THIS MATERIAL IS
CAS: 14464-46-1
RTECS: VV7325000
Fraction By Weight: 2-5%
OSHA PEL 0.05 MG/M3 (MFR)
ACGIH TLV: 0.05 MG/M3 RDUST
FOR INHAL OF TITANIUM DIOXIDE DUSTS FROM COATINGS IS
RTECS: 9999999ZZ
NO SIGNIFICANT HAZ FOR MAN. LONG-TERM EXPOS TO
RTECS: 9999999ZZ
SILICOSIS. THESE EFTS ARE ASSOC W/BRTHG EXCESSIVE
RTECS: 9999999ZZ
EXPECTED TO GENERATE EXCESSIVE AMOUNTS OF RESPIRABLE
RTECS: 9999999ZZ
PERSISTENT SKIN/EYE IRRITATION OR BREATHING
RTECS: 9999999ZZ
LIMS, LEL BELOW STATED LIM & TO REMOVE DECOMP PRODS
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:MAY BE HARMFUL IF
SWALLOWED. EYE CONT:CAUSES IRRIT. REDNESS, ITCH, BURNING SENSATION
& VISUAL DISTURBS MAY INDICATE EXCESSIVE CONT. SKIN CONT:MAY CAUSE
SLIGHT IRRIT. DRYNESS, ITCH, CRACKI NG, BURNING, REDNESS & SWELL
ARE CNDTNSASSOC W/EXCESSIVE CONT. INHAL:VAP & SPRAY MIST MAY BE
HARMFUL (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ &
CRISTOBALITE & FUSED:IARC MONOGRAPHS, SUPP, VOL 7, PG 341, 1987:GRP
2A. NTP 7TH (SUPP DATA)
Effects of Overexposure:HLTH HAZ:IF INHALED. SANDING & GRINDING DUSTS
MAY BE HARMFUL IF INHALED. CHRONIC:AVOID LONG TERM & RPTD CONT.
THIS PROD CONTAINS TITANIUM DIOXIDE. ANIMALS INHALING MASSIVE QTYS
OF TITANIUM DIOXIDE DUS T IN LONG-TERM STUDY DEVELOPED LUNG TUMORS.
STUDIES W/HUMANS INVOLVED IN MFR OF THIS PIGMENT INDICATE NO INCR
(SUPDAT)
First Aid
First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
FOR AT LST 15 MINS. SKIN:FLUSH IMMED W/PLENTY OF WATER FOLLOWED BY
WASHING W/SOAP & WATER. INHAL:REMOVE TO FRESH AIR. APPLY ARTF RESP
& OT HER SUPPORTIVE MEASURES AS REQD. IF ANYOF FOLLOWING OCCUR
DURING/FOLLOWING USE OF THIS PROD, CONT POIS CTL CTR, EMER ROOM/MD
IMMED; HAVE MSDS AVAIL:INGEST; EXCESSIVE EXPOS TO CORR MATL; (ING
14)
Fire Fighting
Flash Point Method:PMCC
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING NFPA
CLASS(SUPDAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & POSS(SUPDAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSOR BENT MATL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE >120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS IIIB COMBUST LIQS. PROTECT FROM FREEZING.
Other Precautions:IF THIS MATERIAL IS PART OF MULTIPLE COATING SYSTEM,
READ MSDS(S) FOR OTHER COMPONENT(S) BEFORE BLENDING AS RESULTING
MIXTURE MAY HAVE HAZARDS OF ALL OF ITS PARTS.
Exposure Controls
Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A SUITABLE
NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS LISTED BELOW LOWEST SUGGESTED EXPOS (ING 15)
Protective Gloves:NITRILE, NEOPRENE OR LATEX GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . WEAR PROTECTIVE CLOTHING.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
EXTING MEDIA:IIIB COMBUST LIQ FIRES. FIRE FIGHT PROC:AUTOIGNIT/EXPLO
WHEN EXPOS TO EXTREME HEAT. IF WATER IS USED, FOG NOZZ ARE PREF.
HAZ DECOMP PROD:FUMES INCL:CARBON MONOXIDE. EXPLAN OF CARCIN:ANNUA
L RPT ON CARCIN, 1994:ANTIC TO BE CARCIN. ANIMAL:LUNG, BLOOD. EFTS
OF OVEREXP:RISK OF CANCER FROM EXPOS. POTNTL (ING 10)
Chemical Properties
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:<16
Vapor Density:HVR/AIR
Spec Gravity:1.2-1.4
Evaporation Rate & Reference:<30 (BUOAC=100)
Solubility in Water:<81%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACTERISTIC OF CHEM FAMILY
& ANY SOLVS LISTED.
Percent Volatiles by Volume:<95
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED, WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/THIS PROD.
MAY PRDCE (SUPDAT)
Disposal
Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF I/A/W
FEDERAL, STATE, PROVINCIAL & LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH APPROVED WASTE MANAGEMENT FACI LITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.