BZQPG - PRIME-ALL ACRYLIC PRIMER WATER BORNE ACRYLIC (SUPDAT)
- MSDS: BZQPG
- Manufacturer: T J RONAN PAINT CORP
- Product Name: PRIME-ALL ACRYLIC PRIMER WATER BORNE ACRYLIC (SUPDAT)
- National Stock Number: 8010-00N069463
Product Identification
Product ID:PRIME-ALL ACRYLIC PRIMER WATER BORNE ACRYLIC (SUPDAT)
MSDS Date:12/05/1990
FSC:8010
NIIN:00N069463
MSDS Number: BZQPG
Responsible Party
BRONX, NY 10454
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 212-292-1100
Preparer: JD
Cage: 92086
Contractor
Telephone: 718-292-1100
Cage: 92086
Ingredients
0.6 @ 20C
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 5%
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION:VAPOR OR SPRAY MIST CAN
CAUSE HEADACHE, NAUSEA, AND IRRITATION OF THE NOSE, THROAT AND
LUNGS. SKIN CONTACT:IRRITATING UPON REPEATED OR PROLONGED CONTACT.
EYES CONTACT:SLIGHTLY IRRITATING. I NGESTION:MAY BE HARMFUL IF
SWALLOWED. CHRONIC:ANIMAL STUDIES CLEARLY DEMONSTRATED DOSE RELATED
ADVERSE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:EFFECTS ON THE CNS, THE HEMATOPOIETIC
TISSUES, THE BLOOD, THE KIDNEYS AND LIVER, ASSOCIATED WITH THE
ADMINISTRATION OF EHTYLENE GLYCOL MONOBUTYL ETHER (EGBE) (EXTRACTED
FROM DHHS (NIOSH) PUB LICATION NO. 90-118) .
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:INHAL:MOVE TO FRESH AIR. EYE:FLUSH W/LG QTYS OF WATER FOR @
LST 15 MIN. IF IRRIT PERSISTS GET MED ATTN. SKIN:REMOVE SATURATED
CLTHG. WASH W/SOAP & WATER. SEE MED ATTN IF IRRIT DEVLEOPS. LAUNDER
SATURA TED CLTHG & CLEAN SHOES BEFORE REUSE. INGEST:DO NOT INDUCE
VOMIT. SLOWLY DILUTE W/1-2 GLASSES OF MILK/WATER & SEEK MED ATTN.
NEVER GIVE ANYTHING BY MOUTH TO AN UNCON PERSON.
Fire Fighting
Lower Limits:1.1%
Upper Limits:10.6%
Extinguishing Media:DRY CHEMICAL, CO*2, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . USE WATER TO KEEP FIRE EXPOSED CONTAINERS
COOL TO REDUCE PRESSURE.
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER ABOVE 100C/212F.
POLYMER FILM CAN BURN.
Accidental Release
Spill Release Procedures:LG SPILLS:KEEP SPECTATORS AWAY. FLOOR MAY BE
SLIPPERY:USE CARE TO AVOID FALLING. DIKE & CNTN SPILL W/INERT MATL
(E.G. SAND, EARTH). SM SPILLS:TAKE UP W/ABSORB MATL & SEAL TIGHTLY
FOR DISP. TRANSFER LI Q TO CNTNRS FOR RECOVERY/DISP & SOLID
(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID CONTACT WITH VAPORS AND FUMES.
AVOID CONTACT WITH EYES, SKIN AND CLOTHING. STORAGE TEMPERATURE MAX
49C/120F; MIN 1C/34F. KEEP FROM FREEZING.
Other Precautions:STORE AWAY FROM SPARKS AND FLAMES. DO NOT BREATHE
SPRAY MIST. DO NOT TAKE INTERNALLY. OBSERVE ALL LABEL PRECAUTIONS.
Exposure Controls
Respiratory Protection:WEAR TO AVOID BREATHING SPRAY MIST, HEATED
VAPORS OR FUMES OR IF EXPOSURE MAY OR DOES EXCEED OCCUPATIONAL
EXPOSURE LIMITS (INGREDIENTS). USE A NIOSH/MSHA APPROVED RESPIRATOR
TO PREVENT OVEREXPOSURE.
Ventilation:MECHANICAL LOCAL EXHAUST AT THE POINT OF VAPOR OR MIST
RELEASE.
Protective Gloves:WEAR IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER . WEAR PROT CLTHG AS REQ TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH W/SOAP & WATER AFTER HNDLG & BEFORE
EATING, DRINKING, SMKING/USING TOILET FACILITIES. LAUNDER CONTAM
(SUPP DATA)
Supplemental Safety and Health
MFR TRADE/PART NO:PRIMER PRAL. SPILL PROC:DIKING MATERIAL TO SEPARATE
CONTAINERS FOR DISPOSAL. KEEP SPILLS AND CLEANING RUNOFFS OUT OF
MUNICIPAL SEWERS AND OPEN BODIES OF WATER. HYGIENE PRACT:CLOTHING
BEFORE REUSE.
Chemical Properties
Boiling Pt:B.P. Text:340F,171C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.38
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE LIQUID WITH A LOW ODOR.
Percent Volatiles by Volume:56.5
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DECOMPOSITION IS DEPENDENT ON TIME AND
TEMPERATURE. ONSET OF DECOMPOSITION IS 177C/350F. AVOID FREEZING.
Hazardous Decomposition Products:MAY PRODUCE TOXIC FUMES WHEN HEATED TO
DECOMPOSITION. FUMES MAY CONTAIN CARBON MONOXIDE AND/OR CARBON
DIOXIDE.
Disposal
Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL,
COUNTY, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.